Jump to content
SAU Community

Recommended Posts

Hey all my girlfriends R32 has had 2 motors die in her r32 and now she is deciding to drop a 25 in there so we have a heap of cheap parts that are up for sale, i'll start with a few things i can think of and add to the list as i find more stuff:

First RB20 (130,00K's)

Blown head gasket and exhaust valve, currently dismantled;

Bottom end is not that bad but the exhaust valve landed in the first piston bore and made some gouges in there :(

Head is seemingly fine except the exhaust valve will need replacing... offers on these two!!

Cams in perfect condition $ Offers

Second RB20 (76,000Ks)

Low Compression on 6th ran fine though just lean in the top end :(

Head is perfect (Just Tested) $250

Intake manifold $ Offers

Exhaust manifold (Just replaced with perfectly straight one) $100

Perfect Condition Cams $ Offers

Bottom end needs rebuild $ Offers

Also these Items;

1X RB20 turbo in decent condition $100

1X RB25 turbo in good condition minimal shaft play $250

1X RB25 turbo suit rebuild, held boost fine just a bit smoky every few days $ Offers

2X RB20 ignitor packs $ Offers

5X Rb20 Coils seem fine just installed one in my motor and it runs fine :) $25 Each

9X RB20 Injectors 6 are known to run fine 3 i've never driven with so may need to be tested $ Offers will sell lot or individually

1x RB20 Rocker Covers Painted metallic black $100

1x RB20 Rocker Covers silver oil hose connector is broken on one needs welding $30

1x RB20 Good condition Exedy Heavy Duty Clutch $ Offers

1x RB20 flywheel $80

1x R32 standard rear bar pretty beaten up Silver colour $50

1x pair of Monza front R32 shocks Good condition sit at a nice low height, top adjusting nut of one is damaged $150

If you are chasing any RB20 parts or wiring PM me here and i'll let you know if we have any ;)

Cheers, Tobbie 0418510695

Edited by tobs_r32
Link to comment
https://www.sau.com.au/forums/topic/374464-tons-of-rbr32-stuff-for-sale/
Share on other sites

I'm in Hobart area Sven. And yeah tof I only had it running in the car for around 6 or 7 hours and didn't really notice it until my mechanic went to tune it and compression tested it. It's pulled apart at tad engine reco atm

I'm in Hobart area Sven. And yeah tof I only had it running in the car for around 6 or 7 hours and didn't really notice it until my mechanic went to tune it and compression tested it. It's pulled apart at tas engine reco atm

yep cool, do you mind if i ring them about it? , how much are you chasing for it?

not a lot dude, after being buggered around so much myself with dodgy second hand parts i wouldn't do it haha! The head was fine and passed all the tests but mark was saying the bottom end is just worn and needs a pretty decent rebuild. I brought it off a guy on here as a fully working RB20 and only had it in a car for a few weeks. What are your plans for it??

NEW UPDATED LIST;

First RB20 (130,00K's)

Blown head gasket and exhaust valve, currently dismantled;

Bottom end is not that bad but the exhaust valve landed in the first piston bore and made some gouges in there :(

Head is seemingly fine except the exhaust valve will need replacing... offers on these two!!

Cams in perfect condition $ Offers

Second RB20 (76,000Ks)

Low Compression on 6th ran fine though just lean in the top end :(

Head is perfect (Just Tested) $250

Intake manifold $SOLD only the top half sold, still have sensors, 2x bottom manifolds etc.

Exhaust manifold (Just replaced with perfectly straight one) $100

Perfect Condition Cams $ Offers

Bottom end needs rebuild $ Offers

Also these Items;

1X RB20 turbo in decent condition $100

1X RB25 turbo in good condition minimal shaft play $SOLD

1X RB25 turbo suit rebuild, held boost fine just a bit smoky every few days $ Offers

2X RB20 ignitor packs $ SOLD

5X Rb20 Coils seem fine just installed one in my motor and it runs fine :) $25 Each

9X RB20 Injectors 6 are known to run fine 3 i've never driven with so may need to be tested $ Offers will sell lot or individually

1x RB20 Rocker Covers Painted metallic black $100

1x RB20 Rocker Covers silver oil hose connector is broken on one needs welding $30

1x RB20 Good condition Exedy Heavy Duty Clutch $ Offers

1x RB20 flywheel $SOLD

1X RB20 ECU - $SOLD

1x R32 standard rear bar pretty beaten up Silver colour $50

1x pair of Monza front R32 shocks Good condition sit at a nice low height, top adjusting nut of one is damaged $150

1X Perfect RB20/S1 RB25 AFM - $120

Coil Pack Looms - Sold

1x RB20 Intake pipe $40

4x Rb20 Cam Gears $20 each

1x Standard RB20 Coil Pack cover

1x R32 Reo plate for behind the backseat with bolts $50

Still have more wiring and sensors in good condition if your after any ;)

Cheers, Tobbie

Edited by tobs_r32
  • 4 weeks later...

Sill have most of this stuff and more!! Make me some offers!!!

Also have;

2x CAS - $offers

1X Pioneer CD Player good working condition $30

1X R32 straight pipe from the front pipe back (Decat as well) has all the hangers on it mounts up nice.. sounds ANIMAL!! $50

1x Front pair of ISC N1 coilovers 9 months old (7,000ks) Currently being rebuilt $500

1x Rear pair of bilstein Adjustables good condition $300

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I mean it's a bit late to say "This won't have any tangible effect and it is not worth spending more than about three seconds on it, please just enjoy the car" But I said it anyway. Does the pod actually get any airflow in that position behind a bumper like that?
    • Hey guys - apologies for digging this up. Has this website been shutdown or is the outage temporary?
    • So, went shopping at Just Jap for things that might work for the intake  After some trial fitting there I ended up with a 3" x 45° silicone bend, a 3" x 300mm alloy straight, and a humped joiner, some minor trimming will be required to shorten some of the stuff, but nothing that is beyond my "ham fisted" skills The guy at Just Jap was most helpful as we had all sorts of joiners,  bends and stuff out trial fitting  Laying it out above the stuff in there it seems everything will fit nicely, and looking at it, it is probably the way I should have been looking at doing it from the beginning, probably..... In the end it is a front bar off job anyway to remove the original stuff behind the front bar that is taking up the required realestate needed, so maybe a Thursday or Friday job And because I'm a hopeless consumer, I grabbed some new steel wheel nuts, the current ones are a spline drive type with a "security" socket, that somehow someone keeps misplacing, the new ones are a basic black steel 17mm hex socket In other news: I just did my "final" tax return, I am now officially a old retired veteran pensioner, and I'm milking the system for all it's worth,  life is good
    • I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
×
×
  • Create New...