Jump to content
SAU Community

Recommended Posts

Hey guys,

My skyline (R34 25GT) had the engine check light come on quite some time ago, after awhile (didn't drive it much during this period) I got it checked out by andrew at hyperdrive malaga and found it was an ignition fault. seeing as the car is about 95,000kms old and was due for the 100,000km service i changed the sparkies to coppers as recommended by andrew as well as the coilpacks.

just got the car back not long ago, and the engine light is gone, but now at idle, the car makes a slightly odd noise ...

its almost like a mini explosion/popping sound (sorry thats the best i can describe it .. )

the car is fine when running though and drives well and everything performs as normal

i have no idea what this is, but it feels very weird and its happening more often. anybody have a clue what it is?

also, on a slightly different note, is it normal for my car to be LOUDER than usual initially when i make any changes to the exhaust system?

i changed the muffler on the end to a mild steel oval from a stainless cannon and it seems to be in fact louder .. although apparently the cannon had a crack in it and was louder than it should be.

but I found that when i first changed to the 2.5" catback system, the car was very loud initially and after a few weeks quietened down a fair bit... i'm hoping the same happens here cos its ridiculously loud now and i was hoping to quiet it down a bit :|

i'll leave it for a few more weeks and if nothing changes i may just stick the stock exhaust back on! (i kept that sitting around the side of my house lol)

cheers everyone :)

Link to comment
https://www.sau.com.au/forums/topic/374897-not-too-sure-what-the-problem-is/
Share on other sites

The packing in the mufflers need to settle and fill out. Then they will be a little quieter.

With the popping noise, if its only on idle then that is very normal or RB motors. Most do it but u mainly notice it with a louder exhaust system

thats strange, i was confident i wouldn't get ripped off by hyperdrive, the guys there have been highly recommended by most people on the WA forums and are a SAUWA sponsor ...

the price was 450 total for the coilpacks + copper sparkies + labour ...

ive also been told by 3 different mechanics in perth that the R34 coilpacks/sparkies are notoriously difficult to change due to it being in a difficult spot to reach?

they are lying basically..

it's really same as any other RB25/20, you take off the intake piping to the throttle body, disconnect a few hoses and remove the valley cover - only real difference is there is a few more hoses..

i removed and replaced me coilpacks in my r34 in just under an hour a few days ago, for mechanics that are meant to do this shit every day it should be a peice of piss.

they are lying basically..

it's really same as any other RB25/20, you take off the intake piping to the throttle body, disconnect a few hoses and remove the valley cover - only real difference is there is a few more hoses..

i removed and replaced me coilpacks in my r34 in just under an hour a few days ago, for mechanics that are meant to do this shit every day it should be a peice of piss.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kinkstah, no, coilovers aren't illegal, especially as a bolt straight in. The illegal part will be if they're altering suspension geometry beyond factory limits, or the ride height is not legal.   Sounds like the blue slipper just didn't want to deal with any later possibility of mods appearing on the car.
    • The problem has always been that coilovers are able to be adjusted, almost at any time, to be too low. Most people who ever get/got defected for/with coilovers were actually afoul of the minimum ride height rule. So the interpretation by cops/inspectors was always that it is pointless to allow numpty to raise his coilovers and get the car inspected/cleared, then just drop them back down again as soon as they get around the corner from the inspection station.  This led to the interpretation that they were illegal unless rendered such that they can't be adjusted (ie, collars welded to the body, that sort of thing). That may or may not have ever actually been the official line, but I'm pretty sure it's not considered to be a solution these days. Coilovers themselves fall under clause 3.2 b of that manual, because they are an "installation of a variable ride height system" and they don't fit the exclusions in that clause (which point to air springs and other pneumatic adjusters). So, as per previous statements, they require engineering cert to be legal on the road. Once you have such cert, provided you do not adjust them outside the height range covered by the cert, you are OK. Without, you have an unroadworthy vehicle.
    • Here E10 is the cheapest fuel. And general advice is to not use it unless you hate your car. From what I remember it clogs up stuff in the fuel system or injectors?  With US/Canada being E10 across the board, does that mean that all fuel there is terrible?
    • Sorry, are coilovers ACTUALLY ILLEGAL in NSW? They aren't in Vic, as long as they retain 70% of stock travel and the car is above 100mm off the ground. Does NSW actually have a law making coilovers actually illegal? RWC/Blue Slip/Engineering people not knowing the actual f**king laws boils my blood. Demand them to point to the documentation that states a coilover is illegal. (it may exist in NSW ) Edit: I checked. They aren't. https://www.nsw.gov.au/sites/default/files/2021-02/RMS-infosheet-light-vehicle-modifications-manual-suspension-and-ride-height.pdf
×
×
  • Create New...