Jump to content
SAU Community

Kat's R33 Gtst Project

savage1987

By savage1987,
in PC & Games Discussion

 Share

Recommended Posts

savage1987 Contributor

savage1987

Posted
Posted

Plenty of work ahead but perhaps not as much as it looks from the photos :)

Cheap car!! and actually passed RWC pretty well straight away so that's a good start.

I'll let the pictures do the talking for now, plenty of info and work coming up in the following months.

IMG_0670.jpg

Is anyone missing their mailbox? I think its under the car!!!!

IMG_0669.jpg

IMG_0682.jpg

Do you think that the pink number plates bring out my eyes?

IMG_0688.jpg

IMG_0666.jpg

IMG_0667.jpg

IMG_0675.jpg

IMG_0672.jpg

IMG_0692.jpg

Replaced both tie rod ends straight off the bat, as one of them looked like this...

IMG_0696.jpg

And replaced the hub on the same side for good measure, just in case anything was bent/damaged, and because the bearing didn't feel 100%... unfortunately it was an ABS hub onto a car without ABS, so it was time for another trademark Sam-spec backyard fix :P Who ever would have thought of using a coke bottle lid to fix a problem......just imagine what you could do with an entire Mount Franklin bottle.....

IMG_0697.jpg

Link to comment
https://www.sau.com.au/forums/topic/375033-kats-r33-gtst-project/
Share on other sites
savage1987 Contributor

savage1987

Posted
  • Author
Posted

Car is officially roadworthy and registered :)

couple of things to sort out

drivers' door doesn't shut as nicely as it should, and the key doesn't work in the lock of the same door properly.

couple of interior plastic trims need replacing with non-broken ones :)

wheels need a bit of a balance

still doesn't make power properly all the time, needs some tuning love I think. Read somewhere R33s don't like Nistune so that's a shame; PowerFC maybe, given that a bigger turbo will be on the cards for later on?? don't know enough about this side of things.

75coupe Grand Master

75coupe

Posted
Posted

wow.... what made you think this is the right section of the forums for this thread....

Ive seen them turn up in the wrong thread before but this is obtuse

interested to see how/where your build goes though

savage1987 Contributor

savage1987

Posted
  • Author
Posted

*sigh.

I reported the post immediately when I realised it was in the COMPLETELY wrong section of the forum. I don't usually make mistakes like this :( and apparently the moderators took their time moving it, as it still hasn't been moved.

Hmm..

The possibilities are endless.

Anyway thanks for the altogether useful and productive advice you have all given so far :D

savage1987 Contributor

savage1987

Posted
  • Author
Posted

so we swapped the HKS pod for a generic pod PLUS a FMIC with all piping!

WTF!!

Pretty keen to get stuck into building this thing properly, but first i think it really needs a tune or SOMETHING since it uses about 540000L / 100km.

Sometime around Christmas we will strip the entire car and prep it for painting, inside and out. Panel shop can take care of the actual colour laying for us :)

Yo-Yo Grand Master

Yo-Yo

Posted
Posted

Anyway thanks for the altogether useful and productive advice you have all given so far :D

don't mind the nerds, you DID post in the gaming section after all :nyaanyaa:

My first car was an r33 that had exactly the same colour scheme factory two tone silver & grey, ahh the memories

  • 2 weeks later...
savage1987 Contributor

savage1987

Posted
  • Author
Posted

so I'm having trouble chasing down the source of a misfire / spark breakdown..

Idles fine

Coasting down in gear misfires

Under part or full throttle misfires at random so hard the R&R must kick in or something because it's like the power just drops away for a moment now and then

I've changed the O2 sensor just behind the turbo, there looks to be another one in the rear of the catalytic convertor but I don't know what the deal is with that..? Is this a common issue?

There's also an earth strap just hanging free from the floorpan right next to the catalytic convertor... where is this supposed to go?

The earth strap in the engine bay from the motor to the strut tower is a piece of shit, I need to replace this because it's rubbish and I'm not happy with it at all.

Other than this issue the car's going alright :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Looking for a part number for this part here

      By Duncan · Posted

      So....to find any R chassis part number, get your VIN (will be something like ER33-xxxxxx for you) and go to: https://www.amayama.com/en/genuine-catalogs/nissan and enter it. From there you have access to a web version of Nissan's part system, FAST. It is a bit tricky to get used to, so maybe have a shot and post up what you think.  You can also search by general model but note in some cases your car might have different options so VIN is safest.  On diagram 211 I got 14075-75T16 for Connector, Water Hose If I search for part 14053‑21U10 that you posted, that is also a water hose but not the one bolted to the plenum and 14075‑04U00 is the fitting where the water hose goes into the block.
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      Yeah now we are talking I much prefer coolers in the front middle because it lessens the chance of a small bump to a corner stopping the whole event. I was thinking the AT cooler can move out of the radiator, delete the AT/engine coolant interwarmer and mount a separate cooler with a thermoswitch somewhere further back as is common in racing, that would be one thing. Beyond that, the engine oil cooler is an obvious one to move to the wheel arch, potentially one on each side, but unused space is an issue. I did have a earlier pic with the bumper off but it doesn't show how busy the corners are: DS is full of the auto driving sensors and PS is totally fully of windscreen washer fluid reservoir But ultimately I was hoping to keep the AC, and the water/air heat exchanger is fundamental so it is not just the radiator that needs to be in front BTW here's airflow to the rad as it ran at the track (one horn is gone now and I'll remove the lights next time):
    • turboedsloth
      New Wasteland Wa Topic

      By turboedsloth · Posted

    • V35_Paul
      Infiniti Q60 Navigation Update

      By V35_Paul · Posted

      your right the maps for Australia came out in 2017 but are 2010 maps. i got the updated maps SD card put it in and it was the same. Same maps in my Brothers Nissan Patrol. 2020 i think his car is
    • silviaz
      Returning after a long time!

      By silviaz · Posted

      Yeahhhh, the costs have killed me. Spent more than the cost of an engine rebuild and it most mostly servicing and a tune lol.
×
×
  • Create New...