Jump to content
SAU Community

Recommended Posts

my nissan r33 ,ive changed pod k&n fillter ,i new iridum spark plugs ,boost control to 11 psi .when i go 5000-7000rpm i sometimes get a popping noise throw exhust. Pen lugs are set at 1.1. the problem when i accelerate slower its ok . but when when accelerate full throtle at arround 5000-7000rpm i get poping.

it fills like to much air & fuel is going into the engine & coses to cut out .cars got front mount intercooler & apexi exhust.

IF ANYONE CAN HELP IT WILL BE VERY HELPFULL :wacko:

Pull the plugs out and either gap them down to atleast .8mm or buy some bkr6e pre gapped at .8mm. If this doesnt fix it u will need new coil packs.

Or u can drop the boost back down to stock

  • 2 weeks later...

Pull the plugs out and either gap them down to atleast .8mm or buy some bkr6e pre gapped at .8mm. If this doesnt fix it u will need new coil packs.

Or u can drop the boost back down to stock

new plugs iridium 1.1 all good :banana:

Buy coppers next time and gap to 0.8mm. Kristina are horribly expensive. I buy a set of copper plugs for mine for $20 and I run 18psi all day everyday. You don't need iridiums as has already been said, coppers will save you a bunch money

^ as already said before buddy, it will probably bee your ccoilpacks. Either do a refurb on them or buy some expensive splitfires. I would just do the refurb and drop the boost back until I could afford the splitfires buddy. Get a video up of it on youtube and post the link in here if your still concerned.

as already said before buddy, it will probably bee your ccoilpacks. Either do a refurb on them or buy some expensive splitfires. I would just do the refurb and drop the boost back until I could afford the splitfires buddy. Get a video up of it on youtube and post the link in here if your still concerned.<

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yes the gear for the R33/34 is different, it is red and has a different number of teeth. My part didn't come with that gear though, so I don't know how many teeth are on the red one. You'd have to reuse the 260RS/R33 gear, as long as it's not destroyed.   Haha, as unfortunate as that might be it was working fine for about the first 1500km I've had the car for now.
    • Update all   thanks to the workshop manual, it lead me back to checking fuses as mentioned central locking and door open lights worked when acc was switched on. diagram attached shows two points of power 1. ACC and 2.  Batt with the later being fused (#28) I did check the fuses using a multimeter but I must have stuffed that up also. Went back and checked the batt fuse in interior fuse box and you wouldn’t believe it… a blown fuse. replaced fuse and everything is now working as it should including the climate control   thank you all with your positive insight and knowledge.    
    • Where is the warning "That this thread is super old"   I just went into a 5 year old thread, went to do a reply, and couldn't see anywhere obvious a warning of it being super old
    • Duncan is correct. Pitwork (and Toyota's own cheap brand "Drive Joy") were primarily created as brands to sell other manufacturers car parts. It would be weird if Nissan sold parts for Toyota vehicles with a Nissan logo on it, so they created Pitwork to sell parts for other brans Toyota, Honda etc. They are not the same as Nissan genuine parts, although they *do* meet Nissan's standards for replacement parts. They aren't supposed to be a substitute for genuine parts, but a cheaper alternative that is better than Ebay fake parts from you-know-where.
    • Thanks GTSBoy, much easier to work with it now it's free!  
×
×
  • Create New...