Jump to content
SAU Community

Cd Stacker Issue (V35)


Recommended Posts

Hi all, just wanna make a quick question about the factoy bose unit on the 2003 V35, is it common for the 6 discs cd stacker to break or jam?? and is it a easy fix?? I have done abit of research and found some horrible stories, that a faulty cd stacker could lead to A/C malfunctions and battery drains and other disastrous scenarios...I would like to know if these are just some extreme cases or a common issue which most owners experience, only reason asking is bcuz I have looked into buying a 03 model v35 skyline and the cd stacker happened to be apparently "jammed" with error code F0 or soemthing...dont really mind if its an easy fix but if it is a quite seriouse issue then i might have to reconsider...

owners comments and experiences would be greatly appreciated

thanks all

Link to comment
Share on other sites

so i guess double din unit and the facia kit is the way to go, just wondering does the factory pop up screen still work after the conversion? or does it become completely useless?

I went with a CarPC, and left the dead CD staker where it was. I can also switch over to the inbuilt nissan computer for fuel economy and service intervals etc

And if you get the correct cable from Chris ^^^, you can plug whatever device you like into the factory tv :)

I have my CarPC plugged into this screen using a cable from Chris, and also a reverse camera which switches over automatically when you put it in reverse.

So the factory screen is very useful. My center console looks completely stock, and it all tucks away as original.

Link to comment
Share on other sites

BFH! (Big Fkn Hammer.)

seriously it is full strip down of the thing and at the end of it the unit is a throw away. this depends WHERE the transport has locked up. some are easy to strip others you will destroy pulling them apart.

Link to comment
Share on other sites

There is a how to on the removal of the CD's on youtube

Chris - With the cartridge removed as in the video, will the radio, tape, AC etc still function or is there a self check it does that will make it spit the dummy?

I'm going to have to decide whether to add Ipod interface or do the financially painful change to a double din setup. Not looking forward to it.

Link to comment
Share on other sites

it will run without it BUT the ipod lead that I sell will not work as it disables the port that it plugs into if you remove it. there is a trick to it but it is at board level and I do not wish to disclose that for the express reason people will start harassing me when they destroy a board whilst trying to mod it.

Link to comment
Share on other sites

Mark, buy this

http://cgi.ebay.com/...=item3cbbeb0f3c or a new one = $300 shipped these days

and this

http://www.skylinesa...04#entry5994404 ---> similar to what I have and is AWESOME!

= profit!!!

Looks good. Is that a Metra Kit or Original?

How well does the colour matching with the G35 kits go with the V35 interiors especially on a 2001 300GT?

Edited by o2bfit
Link to comment
Share on other sites

That is a 2nd hand original kit. DON'T EVER CONSIDER USING THE METRA. It is a pos. You can spot the Metra rubber buttons a mile off - they are crap and apparently the climate units are know for failing.

Colour match is perfect on mine.

Link to comment
Share on other sites

Question regarding the interior colour. The interior of the my 2001 300GT console is a dull khaki dark greyish colour which I assume is Willow (its certainly no silver or black). There appears to be differences in the jdm colour advertised on ebay, some mention it is a silver/willow, some willow has dark grey on the vents.

This is the closest I've found to my interior but the seller won't ship to NZ.

post-74494-0-54973600-1316252005_thumb.jpg

Does anyone have any information about the interior colours available for the V35 and G35?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Hey all. I'm up to doing my oil and water feed lines. Has anyone done a tutorial on this on a 25det Neo? ( I know i should be asking for a tutorial on how to use the search instead, but I couldn't find anything specific) I'm running a Pulsar 3584 on a 6 boost manifold. I could use some advice on what fittings, sizes and where to run the lines. Thanks for any help.  
    • Hi, I have someone interested, if it falls through I'll let you know.  I have a brand new set of fronts that  I sourced from Bilstein UK, now revalved and complete with springs to go with the very lightly used rears, if you are interested in a full set. As Duncan has mentioned this is not my job, I sold my suspension business over 10 years ago, but I am here to help when I have the time.  To give you some idea of my schedule I was at SMSP for the State Championship for 4 days the weekend before last.  Then The Bend for 4 days last week and back at SMSP testing this week, a day visit to One Raceway, then the SMSP Day Night meeting the weekend after.  I was hoping to squeeze in a dyno day with Scott on my R32 this week, but that's not going to happen, that's the second time I have had to postpone. Apologies if my responses are slow.   Cheers Gary
    • Talking about tools, my trombone cleaner arrived, talk about weird speciality tools....
    • Ha ha ha, I read that he had it based on brownie points so knew it wasn't going to be sold   I also am only shit stirring on buying, while they'd all be great cars, I don't need more, I actually sold one a few weeks ago. And immediately bought more tools...
    • I thought you might have asked about the Honda, but as the boy just wrote off his Patrol, and was trying to find a cheap daily to get by with, I decided to give the Honda to him
×
×
  • Create New...