Jump to content
SAU Community

Recommended Posts

I'm currently looking for an R33 GT-R.

I've found some nice examples that have hit 120,000kms plus.

In general, how long do these engines last for? Do they reach 200,000kms without issues?

I worry as I have never heard of any RB26's reaching 200,000kms before :mellow:

I've only heard about the problems etc.

Should i be staying away from cars over 100,000kms?

I'm experienced with 4G's and 1J/2J's but i'm very new to RB26's.

Any help or advice would be greatly appreciated guys.

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/376475-rb26s-with-higher-kms/
Share on other sites

As long they're looked after well, have solid oil pressure and not hugely trashed, they should be fine.

There is one 33 GTR on carsales that has done 347,000km.

Also don't ever take gospel on the odometer reading, for all we know it could have travelled more or less than indicated.

If seller claim it's genuine, ask for proof - i.e. Log books, de-reg/inspection certificate both here and Japan.

They can last million ks if its never been thrashed , perfect maintanace , kept standard etc etc. So the point is it comes down to the life its had and the current state which will determine its life.

Thanks fellas appreciate the information.

So a well looked after RB26 with 125,000km on it should be okay right?

And when getting a compression test done, what would ideal results be? (Just so i have a decent idea).

Thanks fellas appreciate the information.

So a well looked after RB26 with 125,000km on it should be okay right?

And when getting a compression test done, what would ideal results be? (Just so i have a decent idea).

Im no expert but i'd expect somewhere between 160 - 170 across all 6.

Just make sure they are all around the same reading and for example one is not sitting at 110 and the others are 170.

yep just like any car bring it to a specialist in the car and get them to do a thorough check.. racepace did mine and chris (the owner) looks over it with a fine tooth comb. they know absolutely everything about gtr's

Standard specs are 172psi, though i doubt u will find an engine with compression that goodanything over 150psi is good in my opinion, high 140's is probs stil okNissan workshop manual recommends a rebuild at around 125 from memory so anyting near there is not goodmake sure all cylinders are within 5% of each other

Standard specs are 172psi, though i doubt u will find an engine with compression that goodanything over 150psi is good in my opinion, high 140's is probs stil okNissan workshop manual recommends a rebuild at around 125 from memory so anyting near there is not goodmake sure all cylinders are within 5% of each other

dont know how correct you are there.. my gtr was all around 175 and i was there. and dont know if youd question racepace

dont know how correct you are there.. my gtr was all around 175 and i was there. and dont know if youd question racepace

You have an R34 and he has an R32. Yours will be much newer etc.

As everyone else in this thread has said, the condition of the car and getting a full inspection / compression test will tell you what you need to know... I would not pay much attention to the odometer.

As everyone else has mentioned ignore the KMS on the dash, look at the other tell tale signs of age such as:

- Right hand door wear

- Steering wheel wear

- Drivers side seat wear

etc..

If it says it's got 50,000km on the dash but the rest of the car doesn't reflect it then it's obviously not right.

Make sure you get a compression test done before you buy as well.

Also, when you start modifying don't go above 18psi or you will risk reliability.

As everyone else has mentioned ignore the KMS on the dash, look at the other tell tale signs of age such as:

- Right hand door wear

- Steering wheel wear

- Drivers side seat wear

etc..

If it says it's got 50,000km on the dash but the rest of the car doesn't reflect it then it's obviously not right.

Make sure you get a compression test done before you buy as well.

Also, when you start modifying don't go above 18psi or you will risk reliability.

not always. if it was owned by a larger person then all of those things will have more wear than a car owned by a skinny person. it also comes down to whether the car did short trips or long trips as a car that does shorter trips will have more wear from the driver getting in and out more often.

not always. if it was owned by a larger person then all of those things will have more wear than a car owned by a skinny person. it also comes down to whether the car did short trips or long trips as a car that does shorter trips will have more wear from the driver getting in and out more often.

Good point, all true. And also if the previous owner(s) wore rings there may be a bit more wear and tear on the steering wheel / gear knob, so not the best indication 4 u.

If you can, ask the seller if the 100k major service has been done (and have receipts). If I was buying a car with for example 70k on it, i'd probably be doing the 100k early as you cant really verify the km anyway (And like my mates r32 with 90,000 on it u might find a sticker saying next change due @ 200,000 under the cover.....)

If seller has no confirmation or receipts, maybe another negotiation point 4 u.

too many variables will affect how good a high k (or low k) 26 will be, like any used vehicle you may get lucky or you may have to open your wallet as soon as you get the car into your driveway

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Had another look at the car and I noticed the fuel pump isn't priming on ignition. I'd taken out the pump from the boot to siphon out the old fuel, so maybe I've knocked something loose or broken a wire putting things back together. Will go back with a multimeter and try to work out what's stuffed. Kinda hoping it's the pump itself thats gone so I can upgrade it
    • Yeah agreed, you can't assume that shop are they only people who ever had to work on it. It was just a guess on the mods based on how things were done back then. You can check the Air Flow Meters by the part number on their tags, they are likely either Z32 or Nismo ones (both read about the same but the Z32 one is a little larger while nismo is stock size but supports the higher airflow like a Z32). And yes, all that would get you to 450hp / 340kw To tell what is happening with the turbos, you want a photo of the tag on the core, that will say what it was made out of  (they can retain the front and rear covers to make the plumbing easier)  
    • I'm selling my personal race car. 1992 BNR32 Skyline GT-R About eight years ago the engine developed the dreaded low oil pressure problem. I removed it and found the issue. However shortly after I moved half way across the country, moved my work shop, bought a house, got married, then moved my shop again to it's permanent location for the time being. in turn I do not have the time to race this car as it should be. In turn the engine I built for this car will end up in my street car and this car I hope finds a home with someone who can use it to it's full potential. The roll bar was built by Jason Noren Fabricaiton in Pomona California to SCCA and NASA Specs. The car used to compete in redline time attack and global time attack enthusiast class. It also has a fire suppression system.  The car is with me at my workshop in Kyle Texas, USA. Shipping it is no problem, I can personally deliver the car to the port of either Houston or Los Angeles. Any other port depending on where it is may require transport but we can always work that out.   The chassis itself is rust free, rear quarters and under fenders are free of any rust so it's a very solid foundation for anyone who wishes to move forward with it. As posted and at the asking price of $20,000 USD the car includes all of the following;   All OEM Body panels, front fenders, rear bumpers etc.  OEM Nissan Projector headlamps (Pictured N1 lamps were removed) OEM Nismo Side Skirts / Extensions OEM Rear Spats  Front & Rear Subframes are installed car is full roller Rear Subframe has Cusco Camber Arms, Whiteline HICAS Elimination Front Subframe has Whiteline tension rods and whiteline Sway bars w/ endlinks.  Buddy Club N1 Coilovers All chassis wiring and engine wiring is in tact. Attessa System is fully in tact and was functional before engine removal.  BCNR33 GT-R Brembo Brakes F+R with Endless MX72 Plus Pads, DBA Rotors & Stainless Steel Brake lines Billion Racing Radiator Billion Radiator Hoses Fluidyne Engine Oil Cooler Accusump System (trunk Mounted) 5 Speed Transmission w/ Transfer Case F+R Prop-shafts Rear Differential With rear Axles.  Nismo Gauge Cluster Nismo Clutch + Flywheel   Essentially what is needed to make this car running and driving again is as follows: A working Engine, an ECU, and time to put it together. The price posted is or best offer as I am willing to remove some components to accommodate price to a certain extent. If any serious buyer wants full detailed pictures, videos, or any questions I'll be happy to answer them. I believe this car is priced to move quickly considering it's a rust free and very straight chassis but always open to fair negotiation.  I can be contacted via phone or email. (+19517081648) email is juan@bardabe.com   
    • So...to my (and my mechanics doing the swap) surprise...the oil pan from NEO engine does not fit 100% and needs to by modified like this: It is not a huge problem but in the future i want a "proper" oil pan. So question is...what different oil pan can i get to fit without any problems and modification? Thanks! 
    • Some more info I found.  These are the last entries Yoshikiyo Fujii made on his blog before he passed away in 2009: http://blog.livedoor.jp/fujii_dynamics/ And finally this is where the workshop was situated:  https://maps.app.goo.gl/HhTPtHzt3WVcBTiEA  
×
×
  • Create New...