Jump to content
SAU Community

Recommended Posts

I'm currently looking for an R33 GT-R.

I've found some nice examples that have hit 120,000kms plus.

In general, how long do these engines last for? Do they reach 200,000kms without issues?

I worry as I have never heard of any RB26's reaching 200,000kms before :mellow:

I've only heard about the problems etc.

Should i be staying away from cars over 100,000kms?

I'm experienced with 4G's and 1J/2J's but i'm very new to RB26's.

Any help or advice would be greatly appreciated guys.

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/376475-rb26s-with-higher-kms/
Share on other sites

As long they're looked after well, have solid oil pressure and not hugely trashed, they should be fine.

There is one 33 GTR on carsales that has done 347,000km.

Also don't ever take gospel on the odometer reading, for all we know it could have travelled more or less than indicated.

If seller claim it's genuine, ask for proof - i.e. Log books, de-reg/inspection certificate both here and Japan.

They can last million ks if its never been thrashed , perfect maintanace , kept standard etc etc. So the point is it comes down to the life its had and the current state which will determine its life.

Thanks fellas appreciate the information.

So a well looked after RB26 with 125,000km on it should be okay right?

And when getting a compression test done, what would ideal results be? (Just so i have a decent idea).

Thanks fellas appreciate the information.

So a well looked after RB26 with 125,000km on it should be okay right?

And when getting a compression test done, what would ideal results be? (Just so i have a decent idea).

Im no expert but i'd expect somewhere between 160 - 170 across all 6.

Just make sure they are all around the same reading and for example one is not sitting at 110 and the others are 170.

yep just like any car bring it to a specialist in the car and get them to do a thorough check.. racepace did mine and chris (the owner) looks over it with a fine tooth comb. they know absolutely everything about gtr's

Standard specs are 172psi, though i doubt u will find an engine with compression that goodanything over 150psi is good in my opinion, high 140's is probs stil okNissan workshop manual recommends a rebuild at around 125 from memory so anyting near there is not goodmake sure all cylinders are within 5% of each other

Standard specs are 172psi, though i doubt u will find an engine with compression that goodanything over 150psi is good in my opinion, high 140's is probs stil okNissan workshop manual recommends a rebuild at around 125 from memory so anyting near there is not goodmake sure all cylinders are within 5% of each other

dont know how correct you are there.. my gtr was all around 175 and i was there. and dont know if youd question racepace

dont know how correct you are there.. my gtr was all around 175 and i was there. and dont know if youd question racepace

You have an R34 and he has an R32. Yours will be much newer etc.

As everyone else in this thread has said, the condition of the car and getting a full inspection / compression test will tell you what you need to know... I would not pay much attention to the odometer.

As everyone else has mentioned ignore the KMS on the dash, look at the other tell tale signs of age such as:

- Right hand door wear

- Steering wheel wear

- Drivers side seat wear

etc..

If it says it's got 50,000km on the dash but the rest of the car doesn't reflect it then it's obviously not right.

Make sure you get a compression test done before you buy as well.

Also, when you start modifying don't go above 18psi or you will risk reliability.

As everyone else has mentioned ignore the KMS on the dash, look at the other tell tale signs of age such as:

- Right hand door wear

- Steering wheel wear

- Drivers side seat wear

etc..

If it says it's got 50,000km on the dash but the rest of the car doesn't reflect it then it's obviously not right.

Make sure you get a compression test done before you buy as well.

Also, when you start modifying don't go above 18psi or you will risk reliability.

not always. if it was owned by a larger person then all of those things will have more wear than a car owned by a skinny person. it also comes down to whether the car did short trips or long trips as a car that does shorter trips will have more wear from the driver getting in and out more often.

not always. if it was owned by a larger person then all of those things will have more wear than a car owned by a skinny person. it also comes down to whether the car did short trips or long trips as a car that does shorter trips will have more wear from the driver getting in and out more often.

Good point, all true. And also if the previous owner(s) wore rings there may be a bit more wear and tear on the steering wheel / gear knob, so not the best indication 4 u.

If you can, ask the seller if the 100k major service has been done (and have receipts). If I was buying a car with for example 70k on it, i'd probably be doing the 100k early as you cant really verify the km anyway (And like my mates r32 with 90,000 on it u might find a sticker saying next change due @ 200,000 under the cover.....)

If seller has no confirmation or receipts, maybe another negotiation point 4 u.

too many variables will affect how good a high k (or low k) 26 will be, like any used vehicle you may get lucky or you may have to open your wallet as soon as you get the car into your driveway

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
×
×
  • Create New...