Jump to content
SAU Community

Recommended Posts

Hey Guys,

Parting out my former JZR33 build.

For sale is my 1JZGTTE which had 93ks recorded when pulled from the donor.

The motor comes with the full UN CUT harness which patches into the Nissan body harness VERY easily. It is a single piece harness and VERY easy to work with.

It will come with ALL accessories including the factory twin turbos and a quality single high mount manifold, good for changing later on or from the get go. Comes with the pumps belts ETC ETC all the jazz mate, just bolt it in and get yourself a gearbox. Hook up an exhaust to the stock dump pipe, make your cooler pipes fit up and your off and racing.

Comes with custom Nissan mounts, the motor WILL bolt onto a nissan cross member. The mounts are made on an S14 member, you may need to run the S14 member if changing bodies. Measurements did also meet my R33 though.

Comes with a MINES tuned ECU. It is map sensor based too, so the ecu is good for the power rating and the rest is history. This should all plug in on the factory twins, come on song at 2000rpm and make 250 Killerwasps with its eyes closed. Hows them apples?

THIS IS THE MANUAL VERSION, no issues with not plugging it up to an auto or vice versa.

You will get both the front engine sump (for nissan use) or mid engine sump if you wanna put it back in a Supra etc.

FYI 250kw 1700kg auto Soarers are a formidable threat when it comes to the drags, these motors deal out the torque!

The sump is not bolted down at the moment so the buyer gets to have a GOOD inspection before buying, perfect nik.

Want: $1500 FIRM.

For $1500 you get:

- motor

- all accessories

- flywheel

- turbos

- manifolds

- full harness

- MINES ecu

- single manifold

- front engine sump AND mid engine sump

- NISSAN engine mounts

Come and get it.

  • 3 weeks later...

Wanna seperate some stuff?

If so can I have details on the single manifold

And is the ECU from a Soarer or a mkIII Supra?

and what nick are the standard turbos in?

Wanna seperate some stuff?

If so can I have details on the single manifold

And is the ECU from a Soarer or a mkIII Supra?

and what nick are the standard turbos in?

Single manifold is a XS Power job, its actually well made and gets my vote. I was confidently going to put a Kando on one end of it.

Mines ecu is JZA70R manual.

Stock turbos good nick.

Will sepparate if I get alternate interest in the motor without that stuff. ECU is the one I dont want to let go easily, its hard to find MT ecu's.

Also have the matching R154......

shame your not in sa!

Always my luck! Have shipped to SA before tho, $400 I think.

Just to clarify the whole motor is JZA70R manual guys........................

Izz nott aa toyyyyyy.....

If somebody wants the R154 box for the right price it will be available too.

Thanks,

  • 3 weeks later...

All still available.

Had keen interest yet prospective buyers have gone other ways with their cars, that happens.

PM me.

BUMP FOR A GREAT MOTOR

but i think its maybe a touch dear mate selling it all as is. i just put a 1jz and r154 in my r32.... i paid $890 for a complete running auto halfcut from importer.

you should get around a grand easy though with that front sump... then sell your manifold, and other spare parts seperately to make up the extra cash

Edited by 88cameron88
  • 2 weeks later...

Mmm no.

This is a complete running motor, just needs power to the harness.

The front engine sump goes for 4-600 depending on demand, the mid sump for 200, the mines ecu goes for 500+, the stock turbos go for 400+ depending on demand, the single manifold is anything above 300, its got low Ks, nissan engine mounts ready to rock and roll AND above all its a factory manual.

The price is teh f**king epic.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 2001 BE5D Subaru Legacy B4 RSK (3rd gen) EJ208 (pink injector) Twin Turbo 280PS 5-speed manual Full time 4WD "RSK" grade which means all of the above LQC option which means stock rear spoiler  I got it primarily to export to someone outside Japan who was interested. These BE5 Legacy B4 RSKs are going through a bit of a resurgence right know in Japan as they are one of the few cars from the "turbo, manual, RWD/4WD, 280hp gentleman's agreement era" cars that don't require stupid money to purchase. Which for some people might be a good opportunity to get as a base for restoration. If I can't find anyone to purchase it I will certainly be doing that myself over the long term. Why? Because it's properly fast in stock form, handles well enough for a GT sedan, there's still enough aftermarket and (if you can wait a while) genuine part support to make it a restoration candidate (<-- that will only get worse over time so it's a case of do it now or choose get a BL5 4th Gen). Mechanically it's fine, has only 89,200kms on the odometer. The problem with this car is that the body and exterior trims are weathered from at least the last 10 years being parked outdoors. I'm the 3rd owner, the first owner was the one that had it for 14 years and barely drove it, had a low-speed front impact (which didn't damage anything behind the radiator support) and got it fixed and sold it. The 2nd owner put most of the kms on it and parked it outside for the last 10 years, hence the door rubbers have seen better days but if you overlook those cosmetic details, it presents pretty nicely. There is some minor rust on the LH rear wheel arch which I'll have looked at too at some stage.  Also as you'd expect from a car this age, the clear top coat is gone, leaving a satin finish on the roof.  Mechanically it's fine (as you would expect from a car with less than 100K kms) but the steering does feel slightly vague around the centre position at higher speeds. So first on the list is to get the steering rack bushes looked at. There's also the Lock button on the remote which doesn't work, but the Open button does.... it means that the anti-theft system thinks it's always open? It seems like if you open the car and don't start the engine within 3 mins or so the anti-theft kicks in again without any beeps or signals. So if you got to start it after that, it won't. You have to push the open button again. That's how I understand it anyway. Just a small irritation but not a big problem to sort out. There's only one mod, the Wangan SPL muffler. Just a tad louder than stock. It's a really good mod for those who don't want to wake the neighbours but still want to hear a more prominent unequal length header EJ20 sound. Anyway I hope to get all those things done eventually, that is unless someone wanted to import it to their country from Japan (where I live). I'm open for negotiations as I really would like a Skyline... but this will definitely suffice in the meantime 🙂 *Disclaimer: This is how I picked it up from the dealer, minus the stuff on the back seat. I haven't cleaned the engine bay or done a thorough exterior clean, aside from spray painting the wipers. 
    • Wow, even with the Audi logo centre caps. I love OEM wheel mismatches. 
    • Welcome!  Can't go wrong with a Stag.
    • Looks good. Nice height.
    • Hey all, a little help from the Stagea hive mind plz.. I'm days away from buying either a 2002 Stagea 250tRS AR-X Four, premium leather, power seats and all the old switches etc that go with it, or a 2002 Stagea 250tRS VR-X Four AERO, pov pack, cloth seats etc, with coil overs, sports zorst, comes with original zorst and suspension and parts. (I think I've got the models right?) Both are VQ25DET, have 160000kms, both straight no rust both with $2000+ in recent servicing receipts, both ride on aftermarket 18" rims. The Aero has a replaced turbo as well. I like the cool factor of the Aero car but the AR-X has never been modified. Neither have been driven hardly at all in the last 5 years. Any thoughts on which one or does it come down to personal preference? davemoto 
×
×
  • Create New...