Jump to content
SAU Community

Recommended Posts

just jap have been great with R35 parts Andrew

has anyone ever swapped ADM/JDM MFD's ? Chris rogers has looked at the setup extensively, cant remember whether I have heard it having been down or if their are substantial differences that would prohibit swapping the MFD's

just jap have been great with R35 parts Andrew

has anyone ever swapped ADM/JDM MFD's ? Chris rogers has looked at the setup extensively, cant remember whether I have heard it having been down or if their are substantial differences that would prohibit swapping the MFD's

they are ENTIRELY different.

ADM 2009 was analog video JDM 2008 was digital. if you were going to do it then a harness swap would be in order as would a front panel swap.

small parts for R35s are not a problem for me to do ex osaka. all I need is a part number or a jap chassis and I can get them. panels are a different matter.

happy to talk about it if someone wants to give me a call.

chris when you get a chance do you mind quoting me a price on the 2011 vinyl dash top piece that wraps around the mfd

part number is 68210KB50A

i thought id swap over to the 2011 mfd surround trim but it doesn't fit well

dealer price on the dashtop makes this swap uneconomical so ive shelved it

Edited by domino_z

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Did you pay with a credit card? I'd be putting a charge back through then finding a new sparky to sort it out. 
    • If you mean the alarm immobiliser; theyre internal to the alarm itself which makes that difficult; I couldnt even see where he put it; its not in the same place as last time; but with all black wiring it might be very challenging to trace  I had someone turn the key for me as I know it only primes for a couple of seconds As my post above; I am getting no voltage to the pump at all; but I am testing continuity of the power line (SB) from the pump plug to the relay fine. As well as the negative from the pump plug to a 12V constant.    Yeah; he blammed the no start on a bad battery; said I needed to get a new battery and it'll start. Turns out the battery drained because the tail lights had been on for half the day during the install (the rubber cushion on the brake switch gave out while he was testing it as I have a picture of the car from that morning with the tail lights off..i've replaced that). The battery was turning over the engine just fine for a long time; but got low since lights were draining it so it was too low to test a start after he finished. I bought a new one on his advice...$250 wasted. My original battery charged up just fine and is healthy.    It was running perfectly fine when I messed up the old alarm (programmed out the remotes). He couldnt start it after removing the old alarm; my assumption is that when he unhooked it; he didnt bridge the circuit back when trying to start it. Its always been perfectly fine. The ECU swap and pump were 2 years ago. It's never missed a beat in that time. 
    • This is a big issue for me without the diff. I just have zero drive from the passenger side when drivers side has no traction. Bec's parents place has a crazy steep driveway with odd camber and I have never been able to get up. My bro-in-law's 130i with an (unknown brand) LSD gets up fine as does their dad's Hiace. My car stays at the bottom. We have other odd camber roads around here as we're elevated a bit and if it's raining I can get totally stuck around some hairpins. 
    • Yeah, I am super excited for this.
    • Was the car running before he touched the car?
×
×
  • Create New...