MP_R33 Posted September 10, 2011 Share Posted September 10, 2011 Hey guys, I have noticed some rust in my engine bay in a very hard to reach spot. It will be hard to treat it properly without taking the engine out. I have used sandpaper and a bit of thinners to remove as much as I can and have gone over it with a tiny paint brush but there are definitely some areas I have missed (my hand does not fit) I am planning on getting the engine rebuilt in a few years time and was wandering if there is anything I can do/use to prevent the rust from growing any further until I have the engine out and can do the proper treatment? Link to comment https://www.sau.com.au/forums/topic/376781-rust-in-engine-bay/ Share on other sites More sharing options...
Cowboy1600 Posted September 10, 2011 Share Posted September 10, 2011 Grab a can of Fish oil. http://www.whiteknightpaints.com.au/product/view/fish-oil Then once you have the engine out you can treat it properly. Link to comment https://www.sau.com.au/forums/topic/376781-rust-in-engine-bay/#findComment-6009269 Share on other sites More sharing options...
MP_R33 Posted September 10, 2011 Author Share Posted September 10, 2011 Does it matter that I have touched up some spots which might still have rust underneath? Grab a can of Fish oil. http://www.whiteknig...t/view/fish-oil Then once you have the engine out you can treat it properly. Link to comment https://www.sau.com.au/forums/topic/376781-rust-in-engine-bay/#findComment-6009272 Share on other sites More sharing options...
Cowboy1600 Posted September 10, 2011 Share Posted September 10, 2011 Nah, shouldn't matter. I would take a stab and say you're only seeing a bit of surface rust, unlikely to be very deep. That said, get some fish oil on it and it will stop it from getting any worse. Link to comment https://www.sau.com.au/forums/topic/376781-rust-in-engine-bay/#findComment-6009293 Share on other sites More sharing options...
MP_R33 Posted September 10, 2011 Author Share Posted September 10, 2011 It is surface rust. Should I take the paint I just went over it with off and coat in fish oil or? Link to comment https://www.sau.com.au/forums/topic/376781-rust-in-engine-bay/#findComment-6009299 Share on other sites More sharing options...
KEBAB_DRIFTER Posted September 10, 2011 Share Posted September 10, 2011 yeah may aswell remove the paint and really let the fish oil do its job Link to comment https://www.sau.com.au/forums/topic/376781-rust-in-engine-bay/#findComment-6009303 Share on other sites More sharing options...
MP_R33 Posted September 10, 2011 Author Share Posted September 10, 2011 I was under the impression that fish oil prevents rust from non infected surfaces. Once rust is there wont it always keep growing until its removed? Link to comment https://www.sau.com.au/forums/topic/376781-rust-in-engine-bay/#findComment-6009356 Share on other sites More sharing options...
Cowboy1600 Posted September 10, 2011 Share Posted September 10, 2011 You're kinda right. Fishoil coats the rust and surrounding metal which stops oxygen (in water) getting to it which is what causes rust. It won't stop it completely, but will significantly slow it down. You need something to act as a sacrificial anode to stop it completely. Link to comment https://www.sau.com.au/forums/topic/376781-rust-in-engine-bay/#findComment-6009378 Share on other sites More sharing options...
MP_R33 Posted September 10, 2011 Author Share Posted September 10, 2011 You need something to act as a sacrificial anode to stop it completely. What does this mean? Link to comment https://www.sau.com.au/forums/topic/376781-rust-in-engine-bay/#findComment-6009390 Share on other sites More sharing options...
Cowboy1600 Posted September 10, 2011 Share Posted September 10, 2011 What does this mean? You need something to provide the electrons to the oxygen instead of them coming from the iron that your car is made out of. Rust happens when impure water steals electrons from impure iron (there are other reactions which can happen, but this is what's happening to your car). So a sacrificial anode will supply those electrons to the oxygen instead of them coming from your chassis rails Link to comment https://www.sau.com.au/forums/topic/376781-rust-in-engine-bay/#findComment-6009395 Share on other sites More sharing options...
MP_R33 Posted September 10, 2011 Author Share Posted September 10, 2011 (edited) Where can I get me something to provide the electrons to the oxygen Edited September 10, 2011 by MP_R33 Link to comment https://www.sau.com.au/forums/topic/376781-rust-in-engine-bay/#findComment-6009413 Share on other sites More sharing options...
Cowboy1600 Posted September 10, 2011 Share Posted September 10, 2011 Where can I get me something to provide the electrons to the oxygen Mmm....i don't think there's anything you can do. There are some electronic rust preventing devices around. In theory the make sense, but i don't think they've been proven to work in practice. Link to comment https://www.sau.com.au/forums/topic/376781-rust-in-engine-bay/#findComment-6009483 Share on other sites More sharing options...
Touge Kyousou Posted September 10, 2011 Share Posted September 10, 2011 Try penetrol (available in spray can format) from bunnings etc. The 4wd'ers love 'it. Some of them penetrol their bull bars and after 1 year of going off road and in salt water etc, no rust on their bull bars. I tested some and it visibly repels water, pretty fun to play with lol. There's some other products from the same manufacturer but i think the spray can format will work best for you.. just aim and spray lol so no need to get your hand all the way in. Link to comment https://www.sau.com.au/forums/topic/376781-rust-in-engine-bay/#findComment-6009509 Share on other sites More sharing options...
star32 Posted September 10, 2011 Share Posted September 10, 2011 http://www.rustbulletuk.com/index.php Link to comment https://www.sau.com.au/forums/topic/376781-rust-in-engine-bay/#findComment-6009600 Share on other sites More sharing options...
warps Posted September 10, 2011 Share Posted September 10, 2011 Where can I get me something to provide the electrons to the oxygen Zinc Any zinc rich primer, such as Zinc-it or cold gal will give you some cathodic protection. Otherwise use the POV anti rust and pour old engine oil over it every time you do an oil change. That's what we used to do in Finland to combat rust on the salted roads back when I were a lad. Link to comment https://www.sau.com.au/forums/topic/376781-rust-in-engine-bay/#findComment-6009675 Share on other sites More sharing options...
iseekool Posted September 11, 2011 Share Posted September 11, 2011 Zinc Any zinc rich primer, such as Zinc-it or cold gal will give you some cathodic protection. Otherwise use the POV anti rust and pour old engine oil over it every time you do an oil change. That's what we used to do in Finland to combat rust on the salted roads back when I were a lad. Exactly. Sand the surface rust back. Spray some zinc rich primer onto onto the affected area. 2x coats. Then a coat of under chassis paint. If it's in a hard to reach spot ie. spray can cannot reach, just spray some paint into the can's cap and use a small brush to paint. Link to comment https://www.sau.com.au/forums/topic/376781-rust-in-engine-bay/#findComment-6010666 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now