Jump to content
SAU Community

Recommended Posts

Hey everyone. I've got my dyne tune this week and just wondering what people have used to cover the hole on the gear box when the front shaft is removed. Also what one of the fuses do I pull out? Thanks.

Ps. I couldnt find the answer on google.

Link to comment
https://www.sau.com.au/forums/topic/376852-getting-ready-for-dyno-this-week/
Share on other sites

I have driven a few hundred km with the front drive shaft out. On the S1 you go to the fusebox in the engine bay and there is a square green fuse for the awd - pull that out - your awd warning light should come on - that's as it should be.

Bloody he'll....should not happen....that is a thick oil IMO and should be fine. Any oil on the rear window of the car???.....if not have a look under the car for leaks.

I'm lucky if I loose 50mls in the VQ in 10000kms....even our race RB,s don't use that much.

P.s came in here to wish you luck on your dyno run.

ive had the car for 100000kms i service the car every 5000kms and every service i measure the oil and i always have lost 500ml every time. I use motul 5w40 but my car does not stop all day so mayby its understandable. My garage floor is pollished concrete so i know there is no leeks.

funny my 78 skyline c210 did the same 500ml every time weird i thought it was a skyline thing

mates c34 just got 230kwatw on e85 and the auto is shitting its self and he fills up every day.

keep us up to date with the resaults i want to get mine done soon.

I think it's done it the whole time I've had it :/. Oh well. I had this fear that the day before the dyno it would blow up or something and sure enough as of yesterday there is a horrible noise, sounds like really bad knock at about 4000 rpm. Another strange thing the hyper gear high pressure actuator holds a steady 14psi well up until the noise starts and I stop accelerating.

I'm curious why there is imperial sized nuts on a Japanese car. So f**king pissed off right now, I have a rounded nut now because I was using a 12mm spanner. Oh yay $165 for the tuner to remove the drive shaft. Just what I needed

I think it's done it the whole time I've had it :/. Oh well. I had this fear that the day before the dyno it would blow up or something and sure enough as of yesterday there is a horrible noise, sounds like really bad knock at about 4000 rpm. Another strange thing the hyper gear high pressure actuator holds a steady 14psi well up until the noise starts and I stop accelerating.

Probably knocking its head off. 14PSI on a highflow with no tune is a receipe for disaster.

Yer, I actually forgot i was like WTF then oh yeah it's at yatala. If I can get 250kw il be happy that should be enough towing power.

Be interesting to see what it pulls. I use the same tuner. Shaun will leave it nice and rich and safe for daily driving.

I only get 258rwkw on 16psi with a gt3076R .82 IW

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...