Jump to content
SAU Community

Recommended Posts

Hey guys, just needed a quick yay or nay on my situation, any advice would be greatly appreciated. For the first time on SAU, a forum search didn't solve things for me :(

Someone recently made an attempt to break in to my R34 GTT, but luckily the alarm scared them off and no damage was done to the car. Unfortunately though, I wasn't at home at the time and the alarm ran long enough to run the battery completely flat. I live on a hill, so thinking I might just give it a quick push start but wanted to check if anyone here thinks I shouldn't? May sound silly but just wanted to be 100% sure before I do it. It has an Exedy HD clutch but apart from that the transmission/engine is stock. If there's any risk of damage I'll ask a neighbour for a jump start but wanted to avoid the trouble.

Cheers in advance thanks.gif

Link to comment
https://www.sau.com.au/forums/topic/376913-flat-battery-push-start/
Share on other sites

I'm no auto electrician, but if your alarm was armed and activated when the battery died, you might find that the relay for the immobiliser is still immobilising the ignition system, so therefore you wont be able to start the car. You might have to jump the battery to deactivate the alarm (therefore switching the relay back to allow the ignition).

It depends on whether the relay is normally open or normally closed.

It depends on whether the relay is normally open or normally closed.

If the immobiliser is of any value it should be impossible to push start the car.

I've ran the battery flat a couple of times in my R33, jumper leads plus a donor car always does the trick :thumbsup:

As above mate, it might not push start if the immobiliser has locked the ignition. Just make sure you get the terminals right when you jump it. I'd come round to help but we're in syd full time now, don't even have the jesmond place now.

Push starting in general is fine though, the transmission and engine get a far harder bashing when driving the car.

Glad there was no damage!

Jump started and good to go :) Never realised the immobiliser would prevent a push start, makes sense though. At least next time I'll know to go straight for the jumper leads, thanks for the responses. :cheers:

Haha yeh ben I was going to text you if I ran into any major trouble, likewise very relieved that no damage was done - very thankful to the alarm. Hope everything's going well down in Sydney for you and tiff, hopefully see you guys soon (I think a group gathering is on the cards)

As Mark said, if you don't have "some" form of charge in the battery, you can't push start a car.

If the battery is flat to the point it kinda wants to turn over but won't, you can push start, below this you can't as the ECU won't turn on, which means there's no signal going to the injectors or spark plugs to fire any fuel that may be left in the fuel line as your fuel pump won't be turned on...

Jump started and good to go :) Never realised the immobiliser would prevent a push start, makes sense though. At least next time I'll know to go straight for the jumper leads, thanks for the responses. :cheers:

Haha yeh ben I was going to text you if I ran into any major trouble, likewise very relieved that no damage was done - very thankful to the alarm. Hope everything's going well down in Sydney for you and tiff, hopefully see you guys soon (I think a group gathering is on the cards)

Cheers mate, glad it's all sorted. Hopefully will see you soon, there's something coming up this months or next I think? I never remember these things lol.

So the car parked outside your place? Pretty surprising, it's a fairly good area that one (though I did just move from jesmond to live in liverpool for 6 months)

If I didn't drive my old r33 fir about 9 days or more, The alarm would drain the shitty tiny battery that nissan would allow to fit in that tiny section in the boot. It was a full rhino Australian standards IMObiliser and alarm with built in turbo timer. I'd probably clutch start it once every 6 months or so. I always carried a portable jump starter pack as well and it came handy if it went flat in a carpark or somewhere flat.

I never once had issues with the IMObiliser not deactivating. They clutch start really easy, once did it on a slight slant, you would barely notice it sloped at all.

  • 3 weeks later...

So the car parked outside your place? Pretty surprising, it's a fairly good area that one (though I did just move from jesmond to live in liverpool for 6 months)

Yeh I thought it was an alright area too, but we seem to get our fair share of vandalism :( A week after the attempt on the 34, someone broke into my sister's car - luckily nothing taken/no damage.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...