Jump to content
SAU Community

Recommended Posts

What hes tryin to say is that every one is scared about lifting a little bit of weight every now and then, too scared or lazy to really push themselves

If u don't do 1RM how are u supposed to know how strong ur getting or how far u ve come..

Dunno about u guys but getting an extra rep on say 80% of my max doesn't get me excited and motivated as much as getting an extra %5 on my 1Rm best like I did on dead lifts the other day..

Not sayin u should be forever doin 1RM but it definatly has it's place

Fair enough man, I'm not hating on what you're style of working out is, I'm just voicing an opinion like everyone does. All i'm saying is I personally measure ability to lift heavy weights by doing a proper set, with proper form. If I can only push out 1 rep for a certain weight, I know for a fact personally, that my form wouldn't quite be as good as dropping that weight a little bit and pumping out a full 6-8 rep set. I'm not saying don't go heavy. If you do 6-8 reps of say, 5-10% less weight than your supposed 1RM, then you are working just as hard (actually tearing the muscle fibres more), and still very heavy (on the basis that you're struggling like a bastard to get those last reps out). Personally I feel that is something to be just as proud of, and possibly the next week even, you should be pushing to get those 6-8 reps on what was your previous "1RM" was, because doing a full set will increase your strength more than seeing how much you can push out for 1 rep.

What hes tryin to say is that every one is scared about lifting a little bit of weight every now and then, too scared or lazy to really push themselves

If u don't do 1RM how are u supposed to know how strong ur getting or how far u ve come..

Dunno about u guys but getting an extra rep on say 80% of my max doesn't get me excited and motivated as much as getting an extra %5 on my 1Rm best like I did on dead lifts the other day..

Not sayin u should be forever doin 1RM but it definatly has it's place

There's more than one way to measure your strength. 1RM is a rather two dimensional way of doing it IMO. I'm not saying that people shouldn't do it, if it's good enough for the olympics then it's good enough for the gym...but to say that it is the only measure of strength, you might as well have a 100 metre sprint at the olympics and forget about the rest of the running events. Personally, I prefer to knock out a set of 10 reps and whatever weight I can get 10 reps of is my maximum...I find this useful as a measure of strength because it is consistent strength over time / endurance. I have friends who can 1RM more than me, but would be dead by my 4th/5th set.

On a side note...not everyone is at the gym to get the highest lift possible. It's nice to progress this, but there will always be someone who can lift more than you. The most annoying thing about powerlifter and bodybuilder cultures...is that neither respect the different goals of each other or other people at the gym for that matter. They seem to become so obsessed with their own goals/lifestyle that they start to pay out on why everyone else is going to the gym for different reasons. There are some funny correlations too...the fat, strong guys tend to bag people who are in the gym to look good...maybe because they couldn't be assed with the cardio to look good themselves...and the good looking but slimly built people bag the fat and strong guys because they couldn't be assed doing heavy compound lifts.

Fair enough man, I'm not hating on what you're style of working out is, I'm just voicing an opinion like everyone does. All i'm saying is I personally measure ability to lift heavy weights by doing a proper set, with proper form. If I can only push out 1 rep for a certain weight, I know for a fact personally, that my form wouldn't quite be as good as dropping that weight a little bit and pumping out a full 6-8 rep set. I'm not saying don't go heavy. If you do 6-8 reps of say, 5-10% less weight than your supposed 1RM, then you are working just as hard (actually tearing the muscle fibres more), and still very heavy (on the basis that you're struggling like a bastard to get those last reps out). Personally I feel that is something to be just as proud of, and possibly the next week even, you should be pushing to get those 6-8 reps on what was your previous "1RM" was, because doing a full set will increase your strength more than seeing how much you can push out for 1 rep.

Agreed.

Yes I agree that to build muscle 8-10 reps is generally ideal

The original argument was wats the big deal with 1RM, I've stated what it's useful for

At the end of the day if my 1RM is goin up then I know ( and I do) punch out more reps on my lighter sets so it's win/win situation

you stooges.

the guy said "my iphone app tells me what my estimated 1rm is"

I agree that the estimated 1rm is of no use to anyone apart from being able to say "in theory I should be able to deadlift x kilos"

which is wankerish through and through.

saying you shouldn't do 1rms because you might injure yourself is the same as saying you shouldn't run the 100m sprint as fast sa you can because you might sprain an ankle.

1rm is used as "the" measure of strength for power and olympic lifting.

If you are interested in your 1rm then go try lifting more weight than your work sets for single reps, increasing the weight each time till you can't lift a weight.

you would probably be able to lift that weight that you failed on when you are fresh so that is your current 1rm.

but to say "my 1rm should be about xyz according to this iphone app" is just retarded and useless.

at least try to PROVE the app right or wrong by attempting it.

if it doesn't interest you, don't post it.

:domokun:

Atm they would be for deadies

190 x1

170x3

X5 not sure but did 140x10 last week

Losing grip is my biggest issue

Bench barbell

125x1

115x3

105x5

Squats

Approximates based on last week

130x1

115x3

100x5

Squats are pretty weak in comparison to the rest of my body so work to do.

They are decent form though, goin past 90 degrees

Edited by GTR_JOEY

are we talking pounds here??? :P

The whole app being able to estimate your 1mr is just a feature. Is pretty close to the mark to be honest. I went 2kg over the weight and had horrible form. What I like about it is that it tracks what I am doing and keeps me motivated, makes me think I can do more!!

Dumbbell Shoulder Press 15kg by 10 reps, should be moving up to the 17.5s...

Full squat 80kg by 8 reps

Bench Press 60kg by 8 reps

Deadlifts: 70kg by 8 reps

not as impressive as some of your lifts, but I have been steadily improving.

most of these guys have 20kg on you mate, I wouldn't worry about matching up

you should do more bodyweight exercises, that's where light guys like you can smash the big boys... challenge them to a pullup comp if they have a go at you;)

not many guys can go from squatting big numbers to doing 20 pullups

Gotta give you credit for wanting to do it naturally, many hardgainers around your age go the ROID route.

All the time i spend preparing and portioning out my meals etc...pisses me off something chronic!

So many times I've seen dudes get massive in like 3 months due to roids, then once they stop they come back to nothing, at least naturally you can maintain the weight better..

If I could get away with it then yea I'd do it, but I like my job :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...