Jump to content
SAU Community

Recommended Posts

my r33 gtst has been playing up for the last few weeks, i duno whats up with it and i need help to find out what the problem is

my car stalls when i pull up to my dirveway after i give it a little hit, when i brake and the car is in neutral it still does it, the exhaust temp light comes up and the car dies, it also dies when i am pulling up to my uncles driveway

last night my car died on the highway at 110km/h, this was a short while after i took it to 180km/h, but it was also after a bump,

ive tried braking hard at the lights and the car is fine,

the battery light has come on once aswell,

i have been told to go see the person who installed my exhaust and ask them questions, but i got the car like that and the guy who did ithe exhaust is in japan, i have also been told it could be the fuel pump, or the timing or even the battery

i need help in finidng the problem, any ideas??

Link to comment
https://www.sau.com.au/forums/topic/37742-my-car-dies/
Share on other sites

sounds like it could be a few things

1. after market bov - or idle circuit

2 o2 sensor not working

this would be my first few guesses based on what u have told me

but id say its something to do with or near those items

also could be a faulty afm

Link to comment
https://www.sau.com.au/forums/topic/37742-my-car-dies/#findComment-759418
Share on other sites

maybe you banged your air flow meter around to much, have you got an after marker air filter,if so check that when you put it on you didnt damamge the afm, but it sound like you might have an electriacl problem in your car if it dies on the freeway, get it checked out by a proffesional they should be able to find out if you havnt got a good earth to your fuel pump and so on,. good luck

Link to comment
https://www.sau.com.au/forums/topic/37742-my-car-dies/#findComment-759423
Share on other sites

Yeah could be a number of things.....the stalling suggests aftermarket bov...if its atmo venting this causes severe confusion with your afm. Perhaps the spring tension isn't correct - maybe adjust it and see what happens. Make sure there are no loose hse connections round the engine...could be a possible vacuum leak....There is another thread about stalling problems in General Discussions... might be worth checking it out.

Link to comment
https://www.sau.com.au/forums/topic/37742-my-car-dies/#findComment-759424
Share on other sites

I almost forgot about this.

Go and get a new battery, it's running out of charge, slowly though so it'll still start but at time it won't start in the mornings etc.

The reason why I know, is that a WRX had the exact same problems as yourself wouldn't start up and keep going on cold mornings, etc.

Spent something like 6 months and finally the battery died on it's ass put in a brand new battery everything working as if there wasn't anything wrong with the car.

This was also after a $500+ full service and had the car completely pulled down and put back together again 3 times and nothing could be said as to what the problem was.

So go and get a new battery, a very good one at least $500+ be worth it as the wouldn't be able to handle the drain placed on it and also can't charge up quick enough.

Lets us know if that fixes it also, as I think a guy with a commonwhore has the same problem, stalls on starts he's changed the computer 3 times also :) meh haha ha.

Link to comment
https://www.sau.com.au/forums/topic/37742-my-car-dies/#findComment-760072
Share on other sites

hey zagan, i had a brand new battery put into the car two months ag to pass rego, apparently this battery goes into the holdens and are fine, its a deepcycle light truck battery, but yeah i have noticed th battery light go on by itself and the car almost dying, about 5 mins ago in fact, when i was reversing and i made sure i reved it so it wouldnt die, i was having thoughts about the battery but i didnt think it would be it coz it is basically a brand new one, ill use my rev speed meter and see how the voltage is when its about to die and see if i need a new battery,

cheers for the advice

Link to comment
https://www.sau.com.au/forums/topic/37742-my-car-dies/#findComment-760887
Share on other sites

yeah, today when i was on the way home, i braked in the middle of an empty street to see how the voltage was going through the car, and i looked at my revspeed meter, it read 11.3 before the car began to stall, it is normally at abour 13.8, 14.1, but as soon as the revspeed displayed 11.3 or so it turned off, i backed off the brake, and the car resumed normal idle, but the revspeed meter died, and now its bunged and wont come on again, the revspeed is hooked up to the ecu and nothing else, does that mean i dont have enough power going around or something is stuffed??

the revspeed meter was only a month old, i wanna see whats up, ill check it out tomorrow and see if its just lose or exposed wires but otherwise im stumped on how it could just die liek that

any ideas?

Link to comment
https://www.sau.com.au/forums/topic/37742-my-car-dies/#findComment-764883
Share on other sites

ur car died wen u were goin 110kms/hr? and ur still here asking wats wrong?

wow consider urself lucky

doesnt the steering wheel and your brakes lock when your car dies?

your steering and brakes dont lock when your engine "dies", you just lose your power assistance on both brakes and steering, still shouldnt have any problem stoping or steering you just have to put in more input. the only way your steering will lock is if you take the key out of the ignition.

Link to comment
https://www.sau.com.au/forums/topic/37742-my-car-dies/#findComment-765218
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For fuelling the Haltechs have O2WB fuel controllers. Very useful for helping tuning VE and correcting for *small* mistakes. Of course if your injector/cam/trigger/sensor data is just wrong (or for a GTT which is not a GT) then you will get impossible reactions to things. I am sure you know this already but the reason people don't typically put haltechs (or any Aftermarket ECU) on GT's is because there's practically no real gains to be had - So this knowledge won't be commonplace.
    • Can someone tell me if the cracks seen in the rear sway bar bushings in these photo's is unacceptable from a roadworthy point of view?  
    • Shouldn't need a "base map" for anything other than guidance to ignition tuning. You just need the engine capacity right, the injector size right, and something, almost anything, for a VE map. On an NA engine, fuelling is almost completely a function of load signal & rpm. It should run and drive with a completely flat fuel map. It will be too lean under load, but that's easily fixed. We used to tune all ECUs without any base map. There were no such things (until someone had tuned a near stock engine on one, and then they had a "base map".
    • What did you actually buy/how much did it cost? When I got mine in like.. 2017...? 2019? the aim was to run Torque for gauges via ODB2 and things like Track Addict/Laptimers/Dashcam/Reversecam/Spotify etc. Mine never broke, but I wonder if you've got the same needs (it sounds like it). Cause I liked the idea of being able to do anything with it. That said, yours also cost 3x the cost of what I spent so... food for thought.  
    • For me there is a massive difference in manufacturer or big brand crippled android (Sony, Kenwood etc) vs the sort of thing I've installed here, which is basically just a tablet in DIN form factor with open Android, and the other model of course is mirroring - Android Auto/Carplay. I hate the locked down manufacturer and AA options where they decide what apps I'm allowed to install, including the Launcher but also importantly things like Ecutek (for this car) or Real Dash (Stagea) are not supported. Plus those crippled versions tend to be slower due to both overheads and lower spec hardware. On the other hand, when this breaks I'll likely be in trouble for support....but how is that different to owning an Infiniti anyway
×
×
  • Create New...