Jump to content
SAU Community

Recommended Posts

Guest INASNT
Hello,

I have noticed the Car "GOLGO" R33 GT-R Midnight Purple in colour is really weak.

It ran 13.3 Down calder a long time ago.. and now on the Dyno only powering 180KW!!! .. i just wanna know is this normal or totaly stuffed up ?

thanks mate

Golgo is tuned to blow flames out the exhaust. :D

dave : i wasnt being a dhead.. i just wanted to know what modifications he had.. as in Exhaust and stuff.. most GT-R's pull just under 200 KW with a full exhaust.. GOLGO was just not all so good for the crown.. even James went red after he saw the results..

Thanks dAve :D

if its stock theres nothing wrong with 13.3, thats all mine did stock, but that was a 8000rpm launch too and not everyone likes to launch it at redline, 180kw at the wheels prob sounds about right too?

13.3 is about avg. for a soft launch and avg. reaction/60ft times.

Something well into the 12's is possible.

180awkW is also avg. for a stockish RB26.

T.

golgo isn't designed to be a rocket, just a nice machine all round, as I'm sure James would agree :D

With 200rwkw a low 13 or high 12sec bracket is about average for a 33GTR. Its the ATTESSA that makes it grip nicely and get the better times than the 33GTS-T

There is nothing wrong with GOLGO. Golgo is a stock R33 GTR with exhaust and that's it. The car's O2 sensors are pretty far gone and hence it is running rich and therefore makes a better flame thrower than a race car. The 13.3 was done with a slipping clutch so it is capable of doing a high 12 which is right for a stock GTR.

The 180awkw is an accurate figure of what the car should be making with the limited mods and tuning.

It is going to be worked on by ICE in the near future so things should pick up soon :rofl:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The incentives are mostly the same, yes. Ethanol is cheap compared to the cost of doing 98-100 RON with crude oil alone. 87 to 93-94 AKI all with E10. In 2020 Canada mandated E10 as a part of their "renewable fuel standard" and is supposedly going to go to E15 in 2030. In California where there are only 8 refineries with two threatening to shut down next year it's been over 20 years now of E10 and 91 AKI maximum because there's just not enough refinery capacity or crude oil supply relative to the demand for premium unleaded fuel. And CARB's low carbon fuel standard means functionally none of the diesel available at the pump is made from crude oil anymore. It's almost all entirely 20% biodiesel blended with 80% renewable diesel (hydrotreated vegetable oil) now. The number of gasoline vehicles that support E15 or higher ethanol concentrations is surprisingly low, I can't imagine it being wise to play tricks like this without flex fuel sensors in most of the fleet.
    • It's almost certainly the same as the one next to it. Have a fish around amongst these hits https://www.google.com/search?q=surface+mount+transistor+m33&sca_esv=9cb49794e0b2005d&source=hp&ei=2vJ5aNjTB7Kw0PEPldnS8QM&iflsig=AOw8s4IAAAAAaHoA6qkfmF6XcygtrZ4Vu9f92NXF_RFd&ved=0ahUKEwjYqIPP7MWOAxUyGDQIHZWsND4Q4dUDCA8&uact=5&oq=surface+mount+transistor+m33&gs_lp=Egdnd3Mtd2l6IhxzdXJmYWNlIG1vdW50IHRyYW5zaXN0b3IgbTMzMgUQIRigATIFECEYoAEyBRAhGKABMgUQIRigAUjKCFAAWABwAHgAkAEAmAHfAaAB3wGqAQMyLTG4AQPIAQD4AQL4AQGYAgGgAuYBmAMAkgcDMi0xoAfMBLIHAzItMbgH5gHCBwMyLTHIBwU&sclient=gws-wiz
    • South Australia, which is hardly as far behind as the rest pf Oz makes out, and who is also not a paragon of progressiveness (read that as over-legislation) in the area of vehicle standards, has this to say on the subject: Adjustable coil-over suspension Aftermarket adjustable coil-over suspension components are suspension units that incorporate an external thread on the main body and corresponding threaded spring saddle that allows the vehicle's suspension height to be varied. If fitting aftermarket or coil-over suspension components you must submit an Application to modify a light motor vehicle form and a report from a light vehicle engineering signatory (LVES).
    • Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • Those above shitboxes, mediocre and above usually have a turbo strapped to them, hence the slightly higher octane is required.  
×
×
  • Create New...