Jump to content
SAU Community

Recommended Posts

hi guys,

my partner and i are new to stagea ownership its great.. i have recently fitted an intercooler kit and pod filter :rolleyes: and noticed tonite when driving home when i put my foot down and car came on full boost it started splutring and had a hiccup.. will having the new intercooler and pod filter cause the air-fuel ratio to be out.. smells a little rich.. have checked clamps on hoses are fine and tight.. car idles and drives fine only when u put your foot down to come on full boost gets a bit of a hiccup but still holds boost on the guage.. any info would be great guys as i want to get the problem fixed as my wife drives the car and dont like having something wrong with a good car..

cheers chris

Edited by stag777
Link to comment
https://www.sau.com.au/forums/topic/377913-stagea-intercooler/
Share on other sites

Could the car be hitting the boost Rich/Retard due to the lack of restriction; thus higher boost?

Not a C34 expert by any means; just throwing it out there?

Maybe slip the OEM airbox back on to eliminate one thing? Not a fan of Pod filters anyway.

Edited by Daleo

if you run too high boost, it will hit boost limiter and cuts out the entire engine for a split second, my stagea did that when i bypassed the solenoid, and connected both hoses without the solenoid. it hit 14.8psi and the boost cut kicked in.

check your boost gauge (if it has a stock one) if it reaches the +7 mark, its hitting high boost, it should on stock stay half way to 3/4 way towards the +7.

cant see how it would over boost though from just a pod and intercooler.

Put a new set of copper plugs in your car NGK BCPR6ES gapped down to 0.8mm. While you have your coils out inspect them carefully for signs of shorting and anyway spray them with some insulating stuff.

All RBs run rich from stock. Look at getting a Nistune chip to make your car fully tuneable and it will go better (more power, more smooothly) all round and will eliminate the Rich and Retard if that is what you are experiencing.

(and yes, get rid of your pod and get a high flow filter for your stock airbox!)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...