Jump to content
SAU Community

Recommended Posts

hey guys, got car back the other day from getting head gasket done, head had a full service and was resurfaced used arp studs and cometic gaskets (head, inlet mani and exhaust mani), gates belt, new tensioners etc etc

when i first went in to get it the mechanic said it was running shit with the boost up so he just ran it at waste gate pressure (10 psi) and said it was ok... i got in it and got 3 blocks down the road and went straight back as it was running bad, at like 4.5k rpm it would just break down and miss and carry on, revs wouldnt even keep climbing! when i got back and told him he said he replaced 1 plug but rest looked good so he didnt bother doing them, so he said leave it with him and he'l replace them all just incase its them. went there the next day and got it, still running shit and he said it mite be the remaped ecu freaking cause of the change in compression. i took it cause i had the shits and thought id sus out what i could find out, so i had a search on these forums and couldnt find anything so i look for a tuner that does 32 remaps and decided id ask toshi (from these forums also) about it and he said it mite be compression but to him it sounded like timing and said to check timing marks and ignition timing before going to see him for retune so i did that and sure as shit the inlet cam was 1 tooth out so took it back to mechanic and showed him (took photos while i had cover off) and he said bring it back in and he'l fix it... so take it back in and when i pick it up it felt heaps better but over like 6k rpm it sort of did the break down thing but no where near as bad so i sort of just thought it was cause it was only on gate pressuse and i was just freaking cause i was used to 18psi... while i was talking to toshi he also said mite be an idea to hook up car to his software and see what its doing after doing head gasket... so thought i wont up boost till we check it then il up it once i no its sweet. so hook it up and at 10psi it was sweet no issue so i only went to 14ish psi and then took it for a drive and it was f**ked again, running as bad as the 1st time i picked it up, so toshi was trying to figure it out on computer but nothing was showing up... so what do you guys this could be? the more boost the worse it is and sometimes the miss can even carry into the next gear, say if i give it abit in 3rd the go to 4th it will sometimes keep missing and then slowly level out... things iv been told to check, coils for crack, plug gap and waste gate spring incase its leaking... any other ideas would be great!

thanks in advance beau

Link to comment
https://www.sau.com.au/forums/topic/378339-wierd-shut-downmiss-thing/
Share on other sites

sorry moodles2...

any way i could isolate each one of these things with out the obvious of cleaning or replacing?

at least ppl are saying its nothing major (fingers crossed they are right)

thanks guys

beau

I probly should have said its a 32 gts with a 25/30, holset hx35w turbo, hi flowed injectors, gtr fuel pump, z32 afm, splitfire coilpacks, external waste gate! Its a rb30e block n 96 rb25de head...

Sorry should have put this in 1st post

Cheers beau

In that case i prob would try another cas as since the problem started after head rebuild he might of dropped the cas or something. Was it just a headgasket change or was the 30 block put in now aswell.

Crank angle sensor sits on exhaust cam

also the timing marks on the backing plate on the head are not the exact timing marks when you use a 30 bottom end with a 25/26 head. i don't know the exact spots but might suggest to get the cam timing done on a dyno

yep its nic's (cef11es) old car, it was sweet before head gasket was done mate. runnung 18psi perfect, pulled like a train from 3000rpm and getting around 350ks a tank...

i gaped down plugs and checked coil packs yesty and still no good... :( im swaping afm with a mates on weekend and see if that helps!

ant other ideas guys?

cheers beau

  • 9 years later...
On 03/10/2011 at 3:33 PM, beau_32 said:

how can i test to c if its CAS? or would i just have to replace it? i tried mates AFM today and no diffrent

cheers beau

many years later and I wish this thread was finished lol, if you're still around, did you end up sorting it? What did it end up being?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You're not the first person that's said that about this car lol. A Touring wagon GT in Spark yellow mica would be the dog's danglies 😆 I will keep an eye out for a future purchase for sure. The seats are almost like the OEM Recaros... electric adjustment for fore/aft and tilt movements except reclining.   
    • Yes!! I love these! It's a shame its not the wagon though!   Thank everything that's holy that it doesn't have the interior of the Aussie delivered ones. Those seats are so much nicer.  
    • I'm both sorry and thankful that you do that. 
    • 2001 BE5D Subaru Legacy B4 RSK (3rd gen) EJ208 (pink injector) Twin Turbo 280PS 5-speed manual Full time 4WD "RSK" grade which means all of the above LQC option which means stock rear spoiler  I got it primarily to export to someone outside Japan who was interested. These BE5 Legacy B4 RSKs are going through a bit of a resurgence right know in Japan as they are one of the few cars from the "turbo, manual, RWD/4WD, 280hp gentleman's agreement era" cars that don't require stupid money to purchase. Which for some people might be a good opportunity to get as a base for restoration. If I can't find anyone to purchase it I will certainly be doing that myself over the long term. Why? Because it's properly fast in stock form, handles well enough for a GT sedan, there's still enough aftermarket and (if you can wait a while) genuine part support to make it a restoration candidate (<-- that will only get worse over time so it's a case of do it now or choose get a BL5 4th Gen). Mechanically it's fine, has only 89,200kms on the odometer. The problem with this car is that the body and exterior trims are weathered from at least the last 10 years being parked outdoors. I'm the 3rd owner, the first owner was the one that had it for 14 years and barely drove it, had a low-speed front impact (which didn't damage anything behind the radiator support) and got it fixed and sold it. The 2nd owner put most of the kms on it and parked it outside for the last 10 years, hence the door rubbers have seen better days but if you overlook those cosmetic details, it presents pretty nicely. There is some minor rust on the LH rear wheel arch which I'll have looked at too at some stage.  Also as you'd expect from a car this age, the clear top coat is gone, leaving a satin finish on the roof.  Mechanically it's fine (as you would expect from a car with less than 100K kms) but the steering does feel slightly vague around the centre position at higher speeds. So first on the list is to get the steering rack bushes looked at. There's also the Lock button on the remote which doesn't work, but the Open button does.... it means that the anti-theft system thinks it's always open? It seems like if you open the car and don't start the engine within 3 mins or so the anti-theft kicks in again without any beeps or signals. So if you got to start it after that, it won't. You have to push the open button again. That's how I understand it anyway. Just a small irritation but not a big problem to sort out. There's only one mod, the Wangan SPL muffler. Just a tad louder than stock. It's a really good mod for those who don't want to wake the neighbours but still want to hear a more prominent unequal length header EJ20 sound. Anyway I hope to get all those things done eventually, that is unless someone wanted to import it to their country from Japan (where I live). I'm open for negotiations as I really would like a Skyline... but this will definitely suffice in the meantime 🙂 *Disclaimer: This is how I picked it up from the dealer, minus the stuff on the back seat. I haven't cleaned the engine bay or done a thorough exterior clean, aside from spray painting the wipers. 
    • Wow, even with the Audi logo centre caps. I love OEM wheel mismatches. 
×
×
  • Create New...