Jump to content
SAU Community

Oil In Coolant

kidafa

By kidafa,
in Engines & Forced Induction

 Share

Recommended Posts

kidafa Veteran

kidafa

Posted
  • Author
Posted

Ok so today I compression tested again so we have readings before and after the head gasket swap. Keeping in mind different compression testers have been used each time and todays tests were with A LOT healthier battery

Todays results:

Cylinder 1 being closest to radiator and 6 closest to firewall:

1. 170 2. 170 3. 162 4. 150 5. 167 6. 165

So cylinder 4 is down. I added a cap of oil and then got a reading of 172

Initial test carried out by mechanic before HG replacement:

No sure which holes they reffered to as 1 and 6 but im assuming its the reverse as what I've done?

1. 155 2. 160 3. 135 4. 145. 5. 160 6. 160.

Where too from here?

The Dan Grand Master

The Dan

Posted
Posted

If it had a blown headgasket before and oil mixed with coolant. It will take ages for that oil to get out of the water galleries. You could flush the system 20 times and still not get it out. I'm betting it's just the old crap working it's way up to the top. It will ALWAYS end up at the cap and collect there. Try adding mineral turps to the system as that can help flush it through but unless the car is overheating and there is oil mixing through ALL the coolant, I'd say you have nothing to worry about

kidafa Veteran

kidafa

Posted
  • Author
Posted

Is the oil milky?

No sign of water in the oil at all....

If it had a blown headgasket before and oil mixed with coolant. It will take ages for that oil to get out of the water galleries. You could flush the system 20 times and still not get it out. I'm betting it's just the old crap working it's way up to the top. It will ALWAYS end up at the cap and collect there. Try adding mineral turps to the system as that can help flush it through but unless the car is overheating and there is oil mixing through ALL the coolant, I'd say you have nothing to worry about

I like your theory but when the old headgasket was removed there were no visual signs of leaks or any issues on it anywhere according to simon. When the headgasket fails and starts mixing oil and coolant is it very easy to tell by looking at the old gasket once its out of the car?

Can someone run me through how I can flush the entire block and cooling system? Ive had a mechanic do it but god knows how well he did it... Im thinking radiator out and clean all that and run a hose into one of the lines and flush it for a good 10 minutes ect ect....

The Dan Grand Master

The Dan

Posted
Posted

No sign of water in the oil at all....

I like your theory but when the old headgasket was removed there were no visual signs of leaks or any issues on it anywhere according to simon. When the headgasket fails and starts mixing oil and coolant is it very easy to tell by looking at the old gasket once its out of the car?

Can someone run me through how I can flush the entire block and cooling system? Ive had a mechanic do it but god knows how well he did it... Im thinking radiator out and clean all that and run a hose into one of the lines and flush it for a good 10 minutes ect ect....

The oil sticks to the cast iron, flushing with a hose won't get it out. It needs to be heated, mixed with the water, then when it condenses it will collect at the cap

Just keep cleaning it off each morning and keep monitoring it day to day. Eventually it will become less and less. If it gets worse, take it in to have it checked

kidafa Veteran

kidafa

Posted
  • Author
Posted

Surely there has to be a way I can give it a good flush?

Spoke to one of the techs at MTQ today in regards to if its possible for the turbo to mix the oil and coolant. He said it is possible but hes never seen it happen. Only way to tell he said would be to remove the turbo cap off one of the water lines and attach a hose to the other end and turn it on and see if water comes out either of the oil lines.... thoughts?

  • 4 weeks later...
  • 2 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Strange issue RB25DET wont start

      By Kinkstaah · Posted

      I've seen similar actually in my situation. You never know what tables are attempted to be used when the car thinks it's -99C or +200C. The fail state is not usually that extreme but you know what I mean - it was in my case though! This is where being able to read all the sensors is useful cause you see this stuff really quickly.
    • Kinkstaah
      First time Skyline owner

      By Kinkstaah · Posted

      The above is very important. However as long as you keep timing relatively low, it's plausible to make your own knock ears and plausible to learn to tune with a modern ECU that can do wideband O2 correction like a boost controller. I mean if you only have one viable road to even drive the car on, learning to tinker to this level may be worth doing given you can't do much else with the car...?
    • Kinkstaah
      Chris' Toyota Mark ii JZX110

      By Kinkstaah · Posted

      I find the fact that the rear plate has to be bent inwards at the rear not so bad: but the front is just awful: It's like come on. (these are my very old, now retired/turned in plates) TBH it is a lot of money to fix a minor issue, the fact I said "I'll never really spend the money on doing this" is why people ended up buying them as a gift for a 'car guy' who can be hard to shop for.. for car guy things.
    • GTSBoy
      Chris' Toyota Mark ii JZX110

      By GTSBoy · Posted

      I just bent the ends of my premo plates. It even went through Regency like that after the engine conversion and the inspector (a great bloke!) just squinted his eyes and said "I didn't see that". Plates, and how they look, are just something that have zero importance to me.
    • GTSBoy
      Strange issue RB25DET wont start

      By GTSBoy · Posted

      Yeah, I would have said the same. It makes me suggest that there are other things wrong, such that the ECU is totally unhappy with the broken sensor. The only other thought here is that maybe it is shorted, which might cause a different issue to the typical "disconnected" sensor.
×
×
  • Create New...