Jump to content
SAU Community

Recommended Posts

Hey guys!

Short and sweet..

Bill from A.T.S ( Adelaide turbo service )

Offers a TD06 copy with same TD06 core,wheels etc 0

Only thing it's a different housing !?

He said nothing like crap eBay Copys .. Same as TD06 just diff housing! Huge bang 4 buck?!

Anyone used one from A.T.S or know sum1 who has?

Just looking for everyones thoughts on it ??

Just Line change otherwise " bolt on"

Cheers guys! :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/378906-td06-copy-from-ats/
Share on other sites

My knowledge of Trust turbo sizing isn't great but I think you'll find the 25g to be a better match to the GT3076. It will come down what power your after, the 20g will run out of puff well before the 25g but it will be more responsive.

The 25g is fairly responsive anyway, my brother is using a kando dynamics TD06-25g on a 1JZ (2.5l) and it comes on boost about 3000-3500rpm.

Something else to think about, I don't know if the TD series turbos come with a T3 style exhaust mount option. The few I have seen have all had a 3 bolt "triangle" flange which would means you will need an after market exhaust manifold. The GT30 has a T3 flange and will bolt onto the stock manifold.

As for the comparison between the two I can't comment, finding GT30 results is easy on this forum, not too many people using TD series turbos anymore.

I bought a GT3076 from Bill at ATS - he made it up for me from a genuine ball bearing garret GT3076r core, an AVO .73ar rear housing that is internal gate and bolts up in stock position to the 6bolt dump pipe, and he ported out the front stock nissan compressor housing to the 'max'. With the auto had it up to 250rwkw at 1bar with S15 silvia 450cc injectors - definately more in it. Id recommend Bills GT3076r "stock" looking turbo over the GCG unit, which he can also supply.

Adelaide Turbo Services are a great business & Bill Keen is a champion bloke.

triangle 3 bolt type? isnt that a "K" style manifold? the ones used on VW and Audis??? anything built for K manifolds is supposed to handle crazy boost. most the KKK hybrid turbos using specific garrett cores run the 40psi+

Tdo6sl2 20G 10CM with external gate ! ;-) Also just as a point both hyper gear and gcg use original comp covers so also give that "stock" look and direct bolt up not just ats but def agree on .73 rear avo housing

Tdo6sl2 20G 10CM with external gate ! ;-) Also just as a point both hyper gear and gcg use original comp covers so also give that "stock" look and direct bolt up not just ats but def agree on .73 rear avo housing

>_< looks like the 10cm is the go lol

What to do about the TD06H 20g or TDO6sl2 20g hahaha

Still hear good thinks about GCG 3076 :thumbsup: brain melting hahaha

Hey guys!

Short and sweet..

Bill from A.T.S ( Adelaide turbo service )

Offers a TD06 copy with same TD06 core,wheels etc 0

Only thing it's a different housing !?

He said nothing like crap eBay Copys .. Same as TD06 just diff housing! Huge bang 4 buck?!

Anyone used one from A.T.S or know sum1 who has?

Just looking for everyones thoughts on it ??

Just Line change otherwise " bolt on"

Cheers guys! :thumbsup:

So is he selling the Kinguwa TD06 sl2 8cm internal gate and just checking them to make sure they are all good, or is he machining them into a 0P6 housing

or something?

Where did u find internal gate Kinugawa $760? Have u got a rear shot ..old style wastegate?

All the newer tso6h /tdo6 sl 20g with newer gate are like 1050 landed that I have seen..

Seen the cheaper ones with older gate for round that kinda coin..

I'd see if you could buy the core like this( but with a 3 inch comp cover however none are for sale atm, have been before)

http://www.ebay.com....=item3f0e3414e0

and then get bill to machine it into a AVO .73 exhaust housing

cheers

darren

Edited by jet_r31

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
×
×
  • Create New...