Jump to content
SAU Community

Recommended Posts

came across this great comparo of ethanol vs petrol

http://www.youtube.com/watch?v=x2BXuI52fOI

my local united is now stocking e85, so ill be keen to compare the ethanol content of united vs caltex with my zeitronix

Edited by domino_z

my sensor was reading E80 but there was still maybe 10-15litres of E70 Eflex in there - so it looks just like the old United E85 ie generally on the higher side of E85, like Martin said.

all the eflex should be out of the system now, so i'll fill again with United and see where it's at. Let you guys know :)

interestingly though, for the last 5-6 months, Caltex has been bang on E70, never moved when i checked. I wonder why United doesn't control the % as much?

  • 1 month later...

onto second full tank now, sensor flicking between E84 and E85, sensor was reading E83 on the way to the station - looks like it's not varying wildly like last time united was around :)

yep united e85 is the way to go - which store are you getting yours from daniel?

couple more updates. swapped my bootlid over to one with a third brake light, and had it ordered with a matte finish which i left unpainted on the under side

if anyone is interested in my old bootlid, shoot me a pm

boot_07.jpg

boot_08.jpg

also got my top racing dry cf mirrors back after getting painted - need to work out how to pop the glass out so i can unscrew the motor

mirror_01.jpg

mirror_02.jpg

love the bootlid, the subtle spoiler kick is really nice - i wanted to do something like that for my old GT-T but never got around to finishing it.

thought about leaving the mirrors dry cf to show off the quality?

I got my United from what i think is technically Braeside, not sure if that's how it's listed on their website, but i think that's the suburb. Near boundary rd/lower dandy rd intersection. It's closer than my closest Eflex too (springvale) so it works out well. Now if Fueltown just got back up and running, i'd only have one a few mins away :D

local to me was brunswick living in the cbd, but they've scraped it now

i have to drive out to balwyn, which is around 8km, not too bad, gets me out of the house on a boring week night. But i also have caltex in hawthorn and footscray which is a bit closer

re mirrors, i prefer subtle exposed matte cf. not painting the insides is a nice detail when using the mirrors from inside the car

Edited by domino_z
  • 4 weeks later...

guys united is going all out and ramping up the servo's now offering e85 in melb

united kingsway (next to merc) is the latest, perfect for me living in the cbd

http://www.unitedpet...cator/fuels/E85

Edited by domino_z

think it's time for me to take the next step

not really interested in a drag car so ruling out big turbos. what ideally im after is stock turbo like spool below 3000rpm for the daily drive duties, and abiltity to carry more boost towards redline for better in-gear acceleration

starting to do my research now on engine internals and turbos, though willall's spec v style porting seems to be the way to go - anyone here done the willall turbo mod?

gtr-vs-specv-turbos-01.jpg

Edited by domino_z
  • 1 month later...

domino - did you ever get around to looking at upgraded turbo's?

I'm curious to know from your investigations if running this upgrade on E85 can still get away with 1000cc injectors?

We are supposed to tune my car later this week on E85 for the first time but I only have ID1000's and am not sure with the extra supporting mods if they will be big enough now.

Martin would best advise whether my injectors are currently max'd (or close to it) on stock turbos - i doubt it though, keep in mind HKS went all the way to 800+hp with their 860cc injectors

I'm still on the fence with turbos - problem i'm having atm is traction, and i can't use all the power i have on my 21" street tyres. 2nd gear is pretty much useless in this cold weather, and 3rd through midrange will cause the car to snap out well past triple digits. I'm considering swapping out my yoko advans for ps2's but i really dont think that will help much

I'm convinced on the benefits of SD tuning vs MAF, so will be having Martin tune for SD at the least

Edited by domino_z

Yeah we are also switching to SD. I tried the upgraded AMS AFM's and they were an epic fail so will go with SD tuning moving forwards.

And I guess we'll just have to try the ID1000's and see.

you'll need pumps too, but im sure you've already upgraded those

is racepace looking after your car in Vic? i may be confusing with another member, but is yours the jdm black gtr with spec v turbos?

Edited by domino_z

Yeah Racepace are doing the car and yes its the black JDM with Spec V turbo's, pumps, cooler, pipes etc.

The car was making 440awkws on 98 with a MAF tune (stock MAF's maxed out in places with-in the tune range but the AMS ones caused a massive back-fire on lift-off and unfortunately I had the crash at Mt Baw Baw rally before we've had a chance to look at it again. Only got the car back last week).

So quite interested to see how it goes on E85 + SD this week. Going to PI this weekend for the real test.

Yeah Racepace are doing the car and yes its the black JDM with Spec V turbo's, pumps, cooler, pipes etc.

The car was making 440awkws on 98 with a MAF tune (stock MAF's maxed out in places with-in the tune range but the AMS ones caused a massive back-fire on lift-off and unfortunately I had the crash at Mt Baw Baw rally before we've had a chance to look at it again. Only got the car back last week).

So quite interested to see how it goes on E85 + SD this week. Going to PI this weekend for the real test.

Hey Snowy,

I have an SD tune in mine at the moment with the 3inch intakes and am getting a huge backfire on acceleration on 98 as well. Going back to the MAF tune until I can get the MAF delete loom here. Then back to the SD tune and see what happens.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
×
×
  • Create New...