Jump to content
SAU Community

Recommended Posts

hey guys,

have a rattle/type vibration sound,the sound is like coming from the right side/turbo,it doesnt sound like an exhaust leak. when stating up when cold and only does it as i rev it up to 2000rpm and as soon as its dropping back half way down to normal revs it makes a like rattle drrrr vibration sound and as its warming up it goes away slowly till warmed up and then no more of that sound.

any ideas or anyone experience this?

Edited by RamR33
Link to comment
https://www.sau.com.au/forums/topic/379417-cold-start-rattling-sound/
Share on other sites

It wouldnt be an exhaust leak if it is only when cold. generally an engine that rattles when cold means its on its way out :/ check to see if it is bottom end. if so bad news. top end generally in my opinon isnt to bad its normally just because oil hasnt reached there yet. my old commodore had noisy lifters when cold. flogged the tits out of her for 40000k and still couldnt kill it. went through 2 gearboxs and the new owner gives it a hard time and just cant do it in. good ol ecotecs

na its not the bottom end plus like i said only when cold for 5 or so minutes then goes away....sounds more to the right side from the cam cover near there.....im pretty sure if it was the bottom end it would not stop.

i hadnt done it as the person said the engine was recoed so thought it wouldve been done or maybe not and only done 20,000ks and so thought not to touch it as i heard every 100,000k to change it...i even took the oil cap off to hear if it was coming from inside but it sounds more external.

as it warms up it goes away when its getting warmer to its normal temp doesnt do it gone after 5 min or so.

ill post up a video soon,ill try and get the sound of it clear.

Edited by RamR33

So does it do it just when you crank the engine? Or are you saying its a rattle at a certain RPM when its cold?

If the engine was re-con'd then yeah it was most likely changed, but it seems fairly common for RB idler and tensioner pulleys to be noisy.

Does it sound like this? (this was mine) Cambelt change fixed it.

Yeah thats the sound mate on the video like the wen the revs come down u can hear it more like grrrr brrrr soundss identical spot on.

it started to do it after the service aswell,could it be the oil,,all i no is he put some martini racing oil 15w-50

wat is that buddy?

Edited by RamR33

Nah. Mine sounded like that for 1.5 years before i got the courage to change everything myself haha.

It wont be cheap. The parts alone will be over $300 depending who you know. Then labour, probly 3-4 hours. it took me 6, going slow and taking my time as id never done a cambelt before.

If i was you id chase down the history of the motor.<BR><BR>mine makes <U>exactly</U> this sound but only after having the cambelt , tensioner, pulley etc done.<BR>its actually a pretty common noise from the kevlar cam belts. It often stops after a while as the belt kinda beds in i guess. Mine has pretty much stopped now.<BR><BR>Having said that tho it can also be the sound of one of those components on its last legs and a cambelt failure isnt far away = fully lunched motor. Avoid like the plague.... <IMG class=bbc_emoticon alt=:yucky: src="http://www.skylinesaustralia.com/forums/public/style_emoticons/default/yucky.gif"> <BR><BR>has ur motor always made this sound or only just started to make this sound? if it has just started then its most likely time to do the '100k service'. If not it might be the noise of the kevlar belt if it was replaced in recent history...make sure tho.<BR><BR>Also make sure the water pump has been done. It should have been done at the same time as the timing belt n they are known to let go n also can be a major problem... (obviously)

Edited by jjman

not quite why the tex shat itself after i edited-

here it is unadultered.

If i was you id chase down the history of the motor. mine makes exactly this sound too, but only after having the cambelt , tensioner, pulley etc done. Its actually a pretty common noise from the kevlar cam belts. It often stops after a while as the belt kinda beds in i guess. Mine has pretty much stopped now. Having said that tho it can also be the sound of one of those components on its last legs and a cambelt failure isnt far away = fully lunched motor. Avoid like the plague....

has ur motor always made this sound or only just started to make this sound? if it has just started then its most likely time to do the '100k service'. If not it might be the noise of the kevlar belt if it was replaced in recent history...make sure tho. Also make sure the water pump has been done. It should have been done at the same time as the timing belt n they are known to let go n also can be a major problem... (obviously)

na it just started after i done a service and changed basicly everything,coils,spark plugs,oil filter,engine oil ect ect and after the engine oil service i notice that sound never done it before until one week or so ago.only had the car for 2/3 month.its not horrible sounding or anything but just find it strange when it warms up it goes away slowly and then the engine sounds fine,very strange.

yeah mine was exactly the same with the change based on temp... and most people note this. General consensus is timing belt noise.

cant imagine being able to hurt the belt unless you are limiter bashing like a madman or mistook your taco for a gtr one :P

seriously, work out when the timing belt (and water pump was done) they (and the rest of the 100k service stuff) are meant to be done every 100k or 10 years. Which ever comes first.

i was only 50k past the last 100k service when my water pump died (caught it straight away so no damage done). But after reading/translating the japanese on the 100k service sticker i was able to work out it was on 10yrs since the job was actually done...

All i no is nizpro built it and was recoed,how do i no when the last time the belt was chaned or anything even tho ive changed basicly everything myself besides fuel filter lol.

I even took it to mechanics who just work on skylines and there like tuff engine bla bla bla and im like u sure nothing wrong or anything and they go yea just ya wiperblades need changing lol.

  • 13 years later...

So my rb is finally having more problems. 2 issues here but I'm here to just to mainly discuss the rattle noise.

The other day when I turned on the car and when I take off or go in reverse, there is a temporary rattle noise but when I cruise, boost, idle it's completely fine no rattle whatsoever. I've also done all the servicing, all the health checks you can think of and it all passes with flying colours. 

Also the rattle doesn't increase with rpm, it's only at a very certain rpm (slightly above 1,100rpm). My other car also has the same issue every once in a while. Changed the oil recently, no difference.

Even took my oil to a lab and everything was quite good surprisingly. Timing belt changed a while ago to. Had the car on the hoist and can't see anything obvious. Tightened a couple of nuts on the exhaust manifold a couple of months ago.

2 different clips uploaded. One of them was supposed to another issue but I'll save that for another time.

Thought I'd see if anyone had this same noise before, it's a bit hard to diagnose while it's intermittent.

If I'm not mistaken, I think I had this a while back but can't remember exactly.

I was thinking if it's doable I'll get someone to hold the throttle cable at 1,100rpm and hopefully it replicates the sound.

Edited by silviaz
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nah. Was just wondering if you were having a small stroke or if there was some slur/gaf/inside joke that I wasn't aware of.
    • That was a fark up, it's Salamanca Place I was thinking of. And now I'm curious as to what potential slur/gaf I have caused with Salamander Road, ha ha!
    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
×
×
  • Create New...