Jump to content
SAU Community

Recommended Posts

hey guys,

have a rattle/type vibration sound,the sound is like coming from the right side/turbo,it doesnt sound like an exhaust leak. when stating up when cold and only does it as i rev it up to 2000rpm and as soon as its dropping back half way down to normal revs it makes a like rattle drrrr vibration sound and as its warming up it goes away slowly till warmed up and then no more of that sound.

any ideas or anyone experience this?

Edited by RamR33
Link to comment
https://www.sau.com.au/forums/topic/379417-cold-start-rattling-sound/
Share on other sites

It wouldnt be an exhaust leak if it is only when cold. generally an engine that rattles when cold means its on its way out :/ check to see if it is bottom end. if so bad news. top end generally in my opinon isnt to bad its normally just because oil hasnt reached there yet. my old commodore had noisy lifters when cold. flogged the tits out of her for 40000k and still couldnt kill it. went through 2 gearboxs and the new owner gives it a hard time and just cant do it in. good ol ecotecs

na its not the bottom end plus like i said only when cold for 5 or so minutes then goes away....sounds more to the right side from the cam cover near there.....im pretty sure if it was the bottom end it would not stop.

i hadnt done it as the person said the engine was recoed so thought it wouldve been done or maybe not and only done 20,000ks and so thought not to touch it as i heard every 100,000k to change it...i even took the oil cap off to hear if it was coming from inside but it sounds more external.

as it warms up it goes away when its getting warmer to its normal temp doesnt do it gone after 5 min or so.

ill post up a video soon,ill try and get the sound of it clear.

Edited by RamR33

So does it do it just when you crank the engine? Or are you saying its a rattle at a certain RPM when its cold?

If the engine was re-con'd then yeah it was most likely changed, but it seems fairly common for RB idler and tensioner pulleys to be noisy.

Does it sound like this? (this was mine) Cambelt change fixed it.

Yeah thats the sound mate on the video like the wen the revs come down u can hear it more like grrrr brrrr soundss identical spot on.

it started to do it after the service aswell,could it be the oil,,all i no is he put some martini racing oil 15w-50

wat is that buddy?

Edited by RamR33

Nah. Mine sounded like that for 1.5 years before i got the courage to change everything myself haha.

It wont be cheap. The parts alone will be over $300 depending who you know. Then labour, probly 3-4 hours. it took me 6, going slow and taking my time as id never done a cambelt before.

If i was you id chase down the history of the motor.<BR><BR>mine makes <U>exactly</U> this sound but only after having the cambelt , tensioner, pulley etc done.<BR>its actually a pretty common noise from the kevlar cam belts. It often stops after a while as the belt kinda beds in i guess. Mine has pretty much stopped now.<BR><BR>Having said that tho it can also be the sound of one of those components on its last legs and a cambelt failure isnt far away = fully lunched motor. Avoid like the plague.... <IMG class=bbc_emoticon alt=:yucky: src="http://www.skylinesaustralia.com/forums/public/style_emoticons/default/yucky.gif"> <BR><BR>has ur motor always made this sound or only just started to make this sound? if it has just started then its most likely time to do the '100k service'. If not it might be the noise of the kevlar belt if it was replaced in recent history...make sure tho.<BR><BR>Also make sure the water pump has been done. It should have been done at the same time as the timing belt n they are known to let go n also can be a major problem... (obviously)

Edited by jjman

not quite why the tex shat itself after i edited-

here it is unadultered.

If i was you id chase down the history of the motor. mine makes exactly this sound too, but only after having the cambelt , tensioner, pulley etc done. Its actually a pretty common noise from the kevlar cam belts. It often stops after a while as the belt kinda beds in i guess. Mine has pretty much stopped now. Having said that tho it can also be the sound of one of those components on its last legs and a cambelt failure isnt far away = fully lunched motor. Avoid like the plague....

has ur motor always made this sound or only just started to make this sound? if it has just started then its most likely time to do the '100k service'. If not it might be the noise of the kevlar belt if it was replaced in recent history...make sure tho. Also make sure the water pump has been done. It should have been done at the same time as the timing belt n they are known to let go n also can be a major problem... (obviously)

na it just started after i done a service and changed basicly everything,coils,spark plugs,oil filter,engine oil ect ect and after the engine oil service i notice that sound never done it before until one week or so ago.only had the car for 2/3 month.its not horrible sounding or anything but just find it strange when it warms up it goes away slowly and then the engine sounds fine,very strange.

yeah mine was exactly the same with the change based on temp... and most people note this. General consensus is timing belt noise.

cant imagine being able to hurt the belt unless you are limiter bashing like a madman or mistook your taco for a gtr one :P

seriously, work out when the timing belt (and water pump was done) they (and the rest of the 100k service stuff) are meant to be done every 100k or 10 years. Which ever comes first.

i was only 50k past the last 100k service when my water pump died (caught it straight away so no damage done). But after reading/translating the japanese on the 100k service sticker i was able to work out it was on 10yrs since the job was actually done...

All i no is nizpro built it and was recoed,how do i no when the last time the belt was chaned or anything even tho ive changed basicly everything myself besides fuel filter lol.

I even took it to mechanics who just work on skylines and there like tuff engine bla bla bla and im like u sure nothing wrong or anything and they go yea just ya wiperblades need changing lol.

  • 13 years later...

So my rb is finally having more problems. 2 issues here but I'm here to just to mainly discuss the rattle noise.

The other day when I turned on the car and when I take off or go in reverse, there is a temporary rattle noise but when I cruise, boost, idle it's completely fine no rattle whatsoever. I've also done all the servicing, all the health checks you can think of and it all passes with flying colours. 

Also the rattle doesn't increase with rpm, it's only at a very certain rpm (slightly above 1,100rpm). My other car also has the same issue every once in a while. Changed the oil recently, no difference.

Even took my oil to a lab and everything was quite good surprisingly. Timing belt changed a while ago to. Had the car on the hoist and can't see anything obvious. Tightened a couple of nuts on the exhaust manifold a couple of months ago.

2 different clips uploaded. One of them was supposed to another issue but I'll save that for another time.

Thought I'd see if anyone had this same noise before, it's a bit hard to diagnose while it's intermittent.

If I'm not mistaken, I think I had this a while back but can't remember exactly.

I was thinking if it's doable I'll get someone to hold the throttle cable at 1,100rpm and hopefully it replicates the sound.

Edited by silviaz
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...