Jump to content
SAU Community

Recommended Posts

Therefore I am amputated from the hip down, and I absolutely love the R34 GTR, there is nothing more beautiful besides the other models of Skylines I know that I blaspheme, but that is my only chance to be able to own one of the absolute best looking cars on earth!

Hey, i'll swap you all the auto stuff from my stagea, for the manual! :thumbsup:

Thanks Zorro i hold you to that :thumbsup: no but seriously i will contact you when the purchase has been made to see if you are still interested :laugh:

Quite straight forward except you will need an ECU that can talk to the auto gearbox controller. Most likely candidate for this is a stock ECU with a NissTune remappable ECU board wired in. This leaves you with auto RB20, RB25 and VG30 ECUs of which I suspect the VG ECU would be most straight forward to talk to an otherwise stock RB26.

Mechanically it should be quite straight forward as I understand the bell housing and auto housing match. Tail shaft would probably need to be custom I guess.

You can source AWD auto gearboxes mated to RBs from Stagea FOUR, Skyline GTS4 and some rarer other models.

I do not quite follow what you mean!! :(

Quite straight forward except you will need an ECU that can talk to the auto gearbox controller. Most likely candidate for this is a stock ECU with a NissTune remappable ECU board wired in. This leaves you with auto RB20, RB25 and VG30 ECUs of which I suspect the VG ECU would be most straight forward to talk to an otherwise stock RB26.

Mechanically it should be quite straight forward as I understand the bell housing and auto housing match. Tail shaft would probably need to be custom I guess.

You can source AWD auto gearboxes mated to RBs from Stagea FOUR, Skyline GTS4 and some rarer other models.

These two parts :( i hope you can excuse me for being swedish with a litlle rust on my english and no motor skills :rofl: Thanks in advance :D

Quite straight forward except you will need an ECU that can talk to the auto gearbox controller. Most likely candidate for this is a stock ECU with a NissTune remappable ECU board wired in. This leaves you with auto RB20, RB25 and VG30 ECUs of which I suspect the VG ECU would be most straight forward to talk to an otherwise stock RB26.

You can source AWD auto gearboxes mated to RBs from Stagea FOUR, Skyline GTS4 and some rarer other models.

ok.

ECU is the computer, it controls the engine. A GTR one is good except that because GTRs never came out with automatic gearboxes the ECU will nott talk to the gearbox and hence the gearbox will not know when to shift gears and do magic.

Stagea RS Four and X-Four comes with the Automatic gearbox that would fit into a gt-r with little work.

Okey :) now i understand better now when i know it can be done all that has to be done is to get the dream into action :) Thank you

ok.

ECU is the computer, it controls the engine. A GTR one is good except that because GTRs never came out with automatic gearboxes the ECU will nott talk to the gearbox and hence the gearbox will not know when to shift gears and do magic.

Stagea RS Four and X-Four comes with the Automatic gearbox that would fit into a gt-r with little work.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...