Jump to content
SAU Community

Recommended Posts

  • Replies 91
  • Created
  • Last Reply

Top Posters In This Topic

you were using a link with "youtu.be" :)

(i've fixed it for ya)

Forum update coming in a month or two will allow for that, but for now you need to get it exact :thumbsup:

Thanks Ash, didn't realise that I could change the insert media link and drop the . from youtu.be

Now to edit a few more for the motorsport section.

There is another HH on with the Gippsland car club on the 3rd Dec

http://www.gippslandcarclub.com.au/suppregs.html

I'm taking the EVO to see how it stacks up against the GSR after missing out on the AROCA PI because they stuffed up the entry mailout.

Only problem with that day Clive (i read the regs 2 weeks ago), is that there is upto 100 entries...

Any idea when it ends? As it's twilight I'd say about 7:45pm given Sunset will be ~8:30pm. So a normal "8 hours".

Given we had what, 7-8 runs with 35 cars @ the WRX day and with 45-50 cars its about 5 runs... With 100 cars you'll get probably 3, maybe 4 timed runs. Lot of effort for such little runs just to save $20 :D

I mean if they only get 50 cars then of course that works out pretty well hehe.

after missing out on the AROCA PI because they stuffed up the entry mailout.

entries for 2012 AROCA Sprint Series Round 1 Phillip Island February 4 SATURDAY should be open just after their December round!

Only problem with that day Clive (i read the regs 2 weeks ago), is that there is upto 100 entries...

Any idea when it ends? As it's twilight I'd say about 7:45pm given Sunset will be ~8:30pm. So a normal "8 hours".

Given we had what, 7-8 runs with 35 cars @ the WRX day and with 45-50 cars its about 5 runs... With 100 cars you'll get probably 3, maybe 4 timed runs. Lot of effort for such little runs just to save $20 :D

I mean if they only get 50 cars then of course that works out pretty well hehe.

yes 100 cars would suck, but as they are not running the figure 8 they can release the next car when the last car is at mid track. I was talkng to Royce about this and sounds like 30-40 % more laps vs the fig 8. How many laps did everyone get in Feb?

Fig 8 is good but more laps is better. Maybe for future events WRX could run the figure 8 only when there is low numbers of cars?

Last HH I did was with FFCC with 35 entries so hopefully there won't be 100 cars.

In any event it's only 1-1/2 kours away so rather than doing nothing in Dec I'll at least let the EVO out for a run :-)

I'll let you all know how it goes.

entries for 2012 AROCA Sprint Series Round 1 Phillip Island February 4 SATURDAY should be open just after their December round!

If they even get it up on their web site. They didn't for this last round.

Sure as hell they won't email past competitors to let them know about it.

Apparently they have preferred list who get in first, or even last, before the general public get a look in.

Last HH I did was with FFCC with 35 entries so hopefully there won't be 100 cars.

In any event it's only 1-1/2 kours away so rather than doing nothing in Dec I'll at least let the EVO out for a run :-)

I'll let you all know how it goes.

A few of us are doing winton on the 18th...if that would tide you over?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...