Jump to content
SAU Community

Recommended Posts

So ive converted a R33gtr gearbox to rwd in my R32 gtst thou im unsure on which speedo drive i should get so i can get the speedo working

Does anyone know if the R32 gtr gearbox speedo will fit a 33 gtr box and conect to the speedo drive from the dash and is it mechanical or electrical ??

or can i take the end of a R33gtr speedo drive and conect it to my speedo drive from the car ?

Link to comment
https://www.sau.com.au/forums/topic/380486-r33-gearbox-speedo-drive-options/
Share on other sites

hey mate r32s have cable drive speedos and r33s have a digital speedo sensor... to over come problem buy a nissan navara speedo sensor and an r33 speedo gear... works a treat, have a look on dobson motorsport there about $225 ;p

hey mate r32s have cable drive speedos and r33s have a digital speedo sensor... to over come problem buy a nissan navara speedo sensor and an r33 speedo gear... works a treat, have a look on dobson motorsport there about $225 ;p

hey mate r32s have cable drive speedos and r33s have a digital speedo sensor... to over come problem buy a nissan navara speedo sensor and an r33 speedo gear... works a treat, have a look on dobson motorsport there about $225 ;p

Thought that's only for a rb25det gearbox in an R32. Maybe post a pic up of the R33 GTR speedo drive and someone might be able to help.

Edited by H4x
  • 8 months later...

I am also looking for a Auto Speed Sensor for R33 GTS-T

speedsensorr33.jpg

In my pic, bottom one is Auto R33 speed sensor wire

Top one is what i was sent after buying one of a forum member who said it was for a auto R33... It fits but has a male plug instead of a female plug.. so i can plug my gearbox cable into it.....

Any ideas?

Edited by R6n350GT

25det rwd would be too long i'd be guessing (and electronic anyway), as 32 gtr is too short for 25det box as above pic shows, just a 32 gtr or gts4 drive should do it? (both are mechanical)

Edited by WMDC35

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...