Jump to content
SAU Community

Recommended Posts

Well the Cams were Tomei , weather or not there was a slight mishap with the cam ill never know, so i ended buying another cam just to get the car running ( cost was 550 ) and it arrived today and found that my cam angle sensor was the wrong type on my car. I than called Triple 9 who is the company only to be told to buy a newer cam angle sensor i than asked him about just swapping my cam which is exactly the same only the end into the sensor is different and than got told " because you bought the cam a little while ago we cant just swap it over but we can look after you buying a new one" What a Pile of Shit! I bought the cam one month ago and its been sitting in the box this whole time. I really cant stress to you all not to do business with Triple 9 .

Just sell your car mate...Sounds that you dont have a clue what your doing....

wow, old thread is old.

If you guys want to know the results.

GT35r...bla bla bla 16 psi, stock motor, stock head = 342rwhp on a " safe setting"

Now on a BUILT engine, with same turbo but with both in/ex Tomei 260d 9.25mm lift cams im making: 350rwhp at 10psi (no boost controller - wastegate controlled) on a RUN IN TUNE.

Rev limit was set to 5000rpm for run in......but i cant remember if matty said that figure was to redline....or the 5000rpm limit ...

Both tunes were done at the pits.

Edited by r33cruiser

Just sell your car mate...Sounds that you dont have a clue what your doing....

Here is the reply

Car has been at mechanics at all times and they had the issues i been the one trying to get the thing going, I also wont sit around and get ripped off either so get your facts straight before you comment.....I could go into whats been done but you proberly wouldn't understand...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...