Jump to content
SAU Community

Eoi Complete R32 Gtr Part Out

ttoks
 Share

Recommended Posts

ttoks Collaborator

ttoks

Posted
Posted (edited)

g'day all, i'm just testing the interest at the moment for a potential part out, car is a massaged R32 GTR, 100% complete car with the following mods (looking at possibly selling EVERYTHING)

built RB26DETT with eagle H beam rods, CP forged pistons and possibly other part's, GT2860RS turbo's (-5's?) front mount intercooler, oil cooler, powerFC, boost controller, engine and turbo's has 14'000 KM on it, not 100% on all of the engine mods, yokohama advan RS 18*10 rims, brembo brakes, carbonetic twin palte carbon clutch, blitz BOV.

how much interested would i get in the car basic's, eg drive shaft's, box, diff's, control arm's, panels, shell, sound system ect.

body is black, in fair but not great condtion, most of interior is in poor condition.

if i get enough interest i will start pulling the car apart for part out, cheer's.

Edited by ttoks
Link to comment
https://www.sau.com.au/forums/topic/380739-eoi-complete-r32-gtr-part-out/
Share on other sites
rb20-into-mr30= Collaborator

rb20-into-mr30=

Posted
Posted

I'm interested in a complete head/wiring loom?

also the front right axle and front tail shaft.

hot33r will take the bottom end so theres the motor!:thumbsup:

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • ELVIS
      ZF 6HP26 to RB30 block

      By ELVIS · Posted

      Hello Liam - HA - somewhere in flies - possibly I have an update, but I have been so busy, projects have taken a back seat to getting business back on track.  I will let you know the outcome, but I think I am going to go for the 8HP,  CHEERS.  ELVIS
    • ELVIS
      ZF 6HP26 to RB30 block

      By ELVIS · Posted

      Thanks Joshuaho96, yes - as someone else also suggested, the 8HP seems the 'smart choice' - HA - and ZERO to do with cost, but I am sure 8 speeds will be better than 6 speeds - HA - maybe.  I will purchase a new 8HP,  Thanks.  ELVIS.
    • ELVIS
      ZF 6HP26 to RB30 block

      By ELVIS · Posted

      Nobody said anything about getting a "...cheap Falcon box..."- it was JUST a question about a specific transmission.  And YOU may have a problem with not enough $ - HA - I do NOT - so please keep your comments like you are some financial guru to yourself.  BUT - much appreciated re the cost of a new 8HP and I twill probably be the way I go.  Thanks.  ELVIS.
    • joshuaho96
      ZF 6HP26 to RB30 block

      By joshuaho96 · Posted

      Most people I know in the BMW world are swapping 6HPs for 8HPs. The 6HP has a big issue with one of the clutch drum bushings wearing out shockingly early which leads to them going into limp mode going into 5th/6th gear as the oil pressure loss from the worn bushing causes clutch slip. Even with the adaptations in shifting the TCU can't bump line pressure enough to keep the clutches from slipping and burning. I've personally looked at a 335d with 6HP28 with one owner and ~90k miles on it and the transmission adaptations were way out of spec and even though it nominally drove ok I'm confident it would have needed a full rebuild sooner than later. Other than that they're fine, but the 8HP doesn't really have weird issues like this to my knowledge and they're in everything these days so pulling them out of crashed cars isn't too hard.
    • joshuaho96
      R34 GT-T cycling ABS pump

      By joshuaho96 · Posted

      There is an ABS pump and a few solenoids. You could trigger the front/rear solenoids with a pressure bleeder attached with a Consult 2. 
×
×
  • Create New...