Jump to content
SAU Community

Need help with getting the studs off urgently :(

inark

By inark,
in Suspension, braking and tyres

 Share

Recommended Posts

inark Grand Master

inark

Posted
Posted

Hi Guys,

Im trying to replace all 5 wheel studs on the rear of my R32 GTST.

Ive taken the calipers off as well as the actual rotor itself but i dont know if i need to undo anything more to get the plate that the studs go thru off or just keep trying to pry the damn thing off...

any help would be great as im supposed to be getting these on by this afternoon cause someone wants to test drive the car :)

Link to comment
Share on other sites
Zombie Collaborator

Zombie

Posted
Posted

Do you have the GTR service manual? would that be similar or even the S13 one?

The section which might help on the GTR manual is on page 517 of the pdf

Adam

P.S. There are many, getting studs "off" jokes, but I wont go there :)

Link to comment
Share on other sites
SteveL Mentor

SteveL

Posted
Posted

The studs are a press fit in the rear hub. The hub is a spline fit to the driveshafts and held in place by a big arse nut done up to a HUGE torque (there's also a lock plate and split pin over the nut). I think the nut itself requires a 30mm socket, plus you'll probably need a puller to get the hub off - after you've got the nut undone.

It might be possible to drive out the old studs with the hub in place after you take off the handbrake shoes to give enough clearance (you should see those 'behind' the hub after the disc is off). If you can get the old ones out that way, getting the new ones in should be fairly easy. If your not sure tho, don't try esp with time so short.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      Sau Members Based In Japan

      By PranK · Posted

      Omg Rezz! Yep we're still here and actually seeing a trickle of oldies coming back.  How's things? 
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      So I raised the car up a fair bit for shipping - see image - then lowered it again when it arrived. I then rushed to get an alignment in NL before the track and the shop just wasn’t anywhere near as precise as what I got in Japan. The guys that did the alignment this week said there was a fair amount of toe in the rear that could have contributed to the understeer. It was also the case that the rear camber went from about -2 to -3 at the shop in NL. However, since I’ve now got slightly wider tires in the rear - NS2Rs run wider than Accelera 651S - I could only get a minimum of -3 in the rear now due to clearance. Front is now -2.75 (-2.45 in minutes) due to being raised a bit (previously -3 in JP). So it’s likely a combination of the two factors, camber and toe. The issue now is I have more camber in the rear than the front and the next step on the front Cusco arms will put me at -3.5ish front which seems a bit excessive to me. The weird thing is I’ve never had any understeer at the track in Japan but they are very different circuits - Japanese circuits are much slower than the one I’ve been to here.    I’m probably going to have to start another thread for the E90. The plan is sort of to keep it as a daily but progressively mod it into a track car - honestly, you need a cage for the sort of speeds you go here. Just ordered the M3 front arms btw.  Love the car despite it being in pretty shitty condition. Oil analysis came back okay and it seems to have stopped consuming oil since fixing a load of engine bay things. Saw yours is a 335i right? f**king mistake on my part getting the DI N53 over the N52, fuel economy is insanely good though at 14-16 km/L.   Cheers, it’s great to see the benefits and pitfalls of different places. I’m contemplating going back to the U.K. around next year as the cost of living in the Netherlands is just ridiculous. GF is nagging me to settle and buy a house but I don’t know what LSD to buy. 
    • LorelaiTorres
      DIY Custom Horn Button

      By LorelaiTorres · Posted

      Have you seen the Milwaukee Train Horn? It's a beast! I stumbled upon it while browsing for upgrades. I'm thinking of adding it to my ride for some serious sound. Here's the link if you wanna check it out: https://bosshorn.com/products/milwaukee-train-horn. Anyway, thanks again for sharing your method.
    • Rezz
      Sau Members Based In Japan

      By Rezz · Posted

      Anybody home...? I used to moderate this part of SAU about 20 years ago... hard to beleive it's still around basically unchanged with all the old posts pinned at the top. Amazing to read all those posts again.  If anyone drops by, I'm still in Japan (Nishinomiya, between Osaka and Kobe).  Cheers 🙂
    • sonicii
      Modding V37

      By sonicii · Posted

      Ah, yeah, the diff bushing in the rear subframe, this has been a problem since the start of the V35 in the early '00s and the only solution ever offered by Nissan is a whole new subframe.  Since they are fluid filled, as soon as they form the smallest crack, they leak brown fluid everywhere.  The aftermarket options for the v35 and V36 aren't suitable for the V37 either, Z1 has built an aftermarket option, but a few people have had issues with it. The brace should reduce movement in that bushing, so should extend its life! Did you notice any increase in noise from the driveline?  I know some have installed solid subframe collars and complain about the amount of noise it transmits through to the body, but not sure if the diff brace makes any noticeable difference?
×
×
  • Create New...