Jump to content
SAU Community

Recommended Posts

is the transmission hardware in 2011 and earlier cars identical? Would LC4 damage the earlier cars ? Lastly Martin, which gearbox program is better? the AP or the Nissan LC4?

Thanks

Yes, we have been doing this for a few months now. Nissan cant do it with the Consult to the best of my knowledge.

Speedah on here has 2011 LC4 in his 2010 ADM GTR :)

Link to comment
https://www.sau.com.au/forums/topic/380950-lc4-flash/#findComment-6074653
Share on other sites

+1 dead keen to know if "LC4" is simply software or are the internals upgraded as well.

is the transmission hardware in 2011 and earlier cars identical? Would LC4 damage the earlier cars ? Lastly Martin, which gearbox program is better? the AP or the Nissan LC4?

Thanks

Link to comment
https://www.sau.com.au/forums/topic/380950-lc4-flash/#findComment-6075390
Share on other sites

How does Nissan warranty the LC4 at 4000rpm launch but not the previous programs?

software only

4000rpm launch is right at the limit of what the stock tyres + stock power can translate to forward momentum

if your car is mod'd, id opt for a lower launch rpm

Link to comment
https://www.sau.com.au/forums/topic/380950-lc4-flash/#findComment-6077519
Share on other sites

How does Nissan warranty the LC4 at 4000rpm launch but not the previous programs?

as long as you use LC with VDC-R you're fine

my 2010 activates LC with VDC-R

this was discussed here a while ago at length, and pretty sure the 2009 ADM guys said they can activate LC with VDC-R too

Link to comment
https://www.sau.com.au/forums/topic/380950-lc4-flash/#findComment-6077563
Share on other sites

software only

4000rpm launch is right at the limit of what the stock tyres + stock power can translate to forward momentum

if your car is mod'd, id opt for a lower launch rpm

When I asked Mizuno-san, face to face, at Philip Island 2011 GT-R launch, if Nissan would honour its much publicised promise to offer upgrades to 2009/2010 cars to 2011spec LC4 ,

his answer was: "not possible, veeery sorry, different internals"

So there.down.gif

Link to comment
https://www.sau.com.au/forums/topic/380950-lc4-flash/#findComment-6079130
Share on other sites

Transmission hardware for the 2011 GR6 is identical to the 2009/2010 cars.

There are some small ancillary differences such as slightly different oil pan design, one fluid magnet rather than two etc. Nothing you would consider a design change. Take that from someone that has stripped both transmissions :)

Link to comment
https://www.sau.com.au/forums/topic/380950-lc4-flash/#findComment-6079508
Share on other sites

I honestly fail to see the attraction of a 4k clutch dump

I cant get full traction at 3k, and this was when I was running Cobb and midpipe only

It is actually quite a smooth event in the MY11 at 4,000rpm. I imagine this is why it is now warranted at this higher engine speed.

I had the opportunity to do a few launches side-by-side with with MY09/10s recently and the LC4 program is far superior in that initial phase of a launch.

Link to comment
https://www.sau.com.au/forums/topic/380950-lc4-flash/#findComment-6079736
Share on other sites

i can understand that

but what happens when you start putting more power through the driveline

isn't 4k a bit excessive for the amount of grip available? and even if it did hook up, that's alot of energy going through the diffs

i come from semi-manual boxes where LC's put alot of stress on the drivetrain, so LC is not something i go out and play with

perhaps Martin who has rebuilt r35 box's can shed some light on what kind of damage over use of the LC causes, or whether the software is so good it can minimise the damage

Edited by domino_z
Link to comment
https://www.sau.com.au/forums/topic/380950-lc4-flash/#findComment-6079783
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...