Jump to content
SAU Community

Recommended Posts

post-41430-0-43273200-1319595054_thumb.jpgHey all, my cruise control has been playing up. I set the factory cruise control to what ever speed, and it works as it should. Then after 3 and a half minutes it beeps, a second orange cruise control light comes on and I get this pic on my tv screen. Anyone know what this says on my screen? (I suspect its just "Cruise control fault"?) And has anyone else had this problem with there factory m35 radar cruise? Thanks Edited by MOUTH
Link to comment
https://www.sau.com.au/forums/topic/381237-m35-factory-cruise-control-issue/
Share on other sites

Go see Brad (ducati02) and get the screen translated! That'll help!

Hey mate, yeah I have already seen brad, my factory dvd/gps drive is stuffed, need a new one to be able to load the conversion. So he ended up just putting a video block on so I can still watch the screen without the handbrake on. Buying another dvd/gps unit is up there on my priority list, but definately not the first thing.

Go see Brad (ducati02) and get the screen translated! That'll help!

Not all screens, ie error messages, have been translated. My airbag error message just disappeared after the English translation. The Russians did a good job, but only did the 'normal' screens from what I can see and ignored all the other potentially helpful messages.

I have never seen that screen before. Saying that I havent faulted my factory cruise control yet to bring it up.

Mine beeps at oncoming traffic.

You could try taking the grill off and cleaning the cover on both sides under the nissan badge. It could be that dirty that its blocking the radar or it thinks something is there. Or check the plug. Is it always 3.5min or is it more randam?

Has anyone got a spare DVD rom for MOUTH :whistling:

I have never seen that screen before. Saying that I havent faulted my factory cruise control yet to bring it up.

Mine beeps at oncoming traffic.

You could try taking the grill off and cleaning the cover on both sides under the nissan badge. It could be that dirty that its blocking the radar or it thinks something is there. Or check the plug. Is it always 3.5min or is it more randam?

Has anyone got a spare DVD rom for MOUTH :whistling:

Iains got one....so does Andy.

You could try taking the grill off and cleaning the cover on both sides under the nissan badge. It could be that dirty that its blocking the radar or it thinks something is there. Or check the plug. Is it always 3.5min or is it more randam?

Has anyone got a spare DVD rom for MOUTH :whistling:

Always @ around 3mins........ Will try the radar clean though

Edited by MOUTH
  • 2 weeks later...

I had this problem on my factory cruise car and it disappeared when I cleaned the grille and front of the radar sensor. The only fault it has now is not going above 110 but apparently that's not a fault....:glare:

The only fault it has now is not going above 110 but apparently that's not a fault....:glare:

Is that an indicated 110 or a real 110? Either way it sucks on the highway. I have one which won't allow more than 240, supposedly. How will I know if the car is limited anyway..lol.

I had this problem on my factory cruise car and it disappeared when I cleaned the grille and front of the radar sensor. The only fault it has now is not going above 110 but apparently that's not a fault....:glare:

Cleaned the grill and sensor and hey presto it works again.......thanks heaps

Yeah 110kmh sucks but eventually I'll get larger rolling diameter wheels and tires to make it actually 110kmh or higher

Edited by MOUTH

Cleaned the grill and sensor and hey presto it works again.......thanks heaps

Yeah 110kmh sucks but eventually I'll get larger rolling diameter wheels and tires to make it actually 110kmh or higher

didnt fix it actually it stuffed up again tonight ....pinch.gif

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah pretty impressive hey, good to see quality products not over-shooting their prices. That's what drew me to buy the hypergear turbo, just a shame I've never got the chance to see it in action
    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
×
×
  • Create New...