Jump to content
SAU Community

Recommended Posts

The only thing I'm scared of is the clutch plate coming loose, 3 of the bolts stretched so I replaced them but I'm worried the rest might let go.

I'm trying to find a picture of how the wiring gets tidied up, I took photos on my phone when i pulled it out but it crashed and I lost them all.

Edited by lilcrash
  • Replies 886
  • Created
  • Last Reply

Top Posters In This Topic

Have been reading along since you started, just unable to comment as I haven't got a clue.

Gotta say man, hats off to your persistence. I can imagine how nerve wrecking it would be to be doing the assembly of your engine for the first time, so the fact that you've pressed on with it and not payed someone else to do it despite not getting any help from anyone here is quite impressive. I do hope it all goes well for you, hopefully those dog hairs don't cause any trouble laugh.gif

Ok this is all I have left to do/buy.

Engine mount nuts for the bottom side (don't know where they ended up), set of belts, 3 bolts in passenger side drive shaft, dump pipe bolts/studs, fuel filter, fit turbo oil drain, buy some hose for the cam breathers.

So yeah should be doing my mountain run on Friday night.

Brain fart again. My car has an imobiliser. F**k im stupid. Just warmed her up and went for a 100km drive though the country side. Got home and turned her off, realized I wasn't in the garage and it wouldn't start :/. Error 21 ignition signal fault, car started 10 times with this fault.

i just did what i read on the net, warmed it up with a high idle, checked for leaks (does have an exhaust leak at the cat to fix but i can do that anytime), then headed for the biggest hills around and loaded it up and down them until i had done 100km (wife needed to wee anyway) and headed for home)

im organizing with my tuner now to get it done asap, ive got my parents car to drive anyway so it can just sit and wait until a few more km are put through it.

my wife was watching the data logging while we were driving and nothing looked dangerous. it made 1-2psi once or twice up hills. although it feels like my hand brake is on, timing out maybe, the cas is lined up with the old marks so it cant be far off, if at all.

other then that, no weird noises or rough running

When I saw the guys do the timing on my car at the shop, they removed the coil pack from cylinder 1, put some sort of a plug from the coil pack to the spark plug then clamped the timing light to that line going to the spark plug. Has to be cylinder one, any induction light will pick up the signal through the wire to the spark and flash when it does.

Bond - yeah I thought that.

Sarge - I wanted to avoid pulling that apart before I changed the plugs for the tune.

I should hear back from my tuner tonight so il see what e wants to do.

Ok just did an oil change. 115km worth of driving

There is about 15-20 big pieces of something. And the oil has a generally glittery look. Millions of tiny particles. I've kept an oil sample.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks mate   It's all coming together finally. It's just a better racecar now and also yeop I've pulled my thumb out and committed and the combo seems to be gelling Depends what you mean by not much more haha There's at least a 1.19 in this My fastest lap posted lost 3.5 tenths in T10 and this was on 80% power and 5 heat cycle old tyres The next session/ lap we did we were up 4 tenths with the car out of the final turn T12 accelerate straight and going with 1 or 2 tenths to come from the power to the finish line and the shifter/gbox combo stopped selecting    So we wouldve had it. The whole thing..   Also repeated this the very next lap up 3 tenths out of T10 and same issue Add some news tyres and we good   Looking forward to a break then yeop WTAC and see if we can actually have a decent run  
    • Thanks,managed to find one from Australia.
    • Yeah pretty impressive hey, good to see quality products not over-shooting their prices. That's what drew me to buy the hypergear turbo, just a shame I've never got the chance to see it in action
    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
×
×
  • Create New...