Jump to content
SAU Community

Recommended Posts

What brand and weight are people using on their Skylines for the rear diff oil?

I have a '96 R33 GTST Auto. It's pretty much stock accept for high flow, an air pod, boost grounding and a FMIC. I havn't upped the boost or done any other mods to the car.

I saw this thread here http://www.skylinesaustralia.com/forums/topic/317121-how-too-change-front-and-rear-diff-oil/ where is mentions

R33 Standard rear diff - 75w-90

Am wondering if that is what people are actually using, or if they are using something else. I have no idea when the diff oil was last changed, so figured it was time I put some new stuff in.

I'm using G&W Syntrans in my auto transmission btw, which is pretty much identical to the Castrol Transmax Z.

Anyway, wondering what my options are as far as Brands for the diff oil, and the correct weight to use.

Edited by KrazyKong

75w90, 80w90, 85w90, 75w85 all 4 will do as they are pretty much sameness. As long as the gear oil conforms to at least GL-4 (GL-5 is fine too).

If i recall correctly GTST's have a viscous LSD which means the LSD component is sealed and don't need an LSD specific oil, whereas GTRs have hypoid LSDs which require a LSD compatible oil.

Standard or LSD???

If its just the standard rear diff +1 for post above. The GL rating is like a quailty rating and its just 4 or higher.

If its a LSD is more important you must use 80w-140, the reason is because its a hypoid type oil and a hypoid diff has such high pressure between the crown and pinon gears that if it was normal oil in there it would squeeze the molecules out between the pinion and crown gears and not lubricate it.

I'm pretty sure my car is a standard and not an LSD. I don't have the LSD light on my dash. Is there another way to verify what's in my car?

I went ahead and put in some Castrol Rear Axle LSX90 (GL-5) based on a friend having it in their '95 R33 GTST Series 1 Manual.

post-63769-0-17621800-1320372136_thumb.jpg

However something strange is now happening which could be a co-incidence or not. I have an Auto as I mentioned before. The gear changes are smooth, but actually moving the gear selector from "P" to "D", or even "R" is hard to do. I can feel something thumping into place and is directly related to me moving the gear lever in and out of "Park". It's very similar to when you park facing down a hill and the car rolls a fraction when you put in and out of "Park". This happens in the morning mostly, and isn't as noticeable when driving home from work. However the weather lately has been warm so I'm not sure this is a temperature related issue. Previously the weather made no difference even in cold Winters to being able to move the gear selector smoothly.

Is the gear lever/selector directly connected with the Axle oil, or only with the transmission fluid? I had brand new fully synthetic trans fluid put in the car for a service a year ago.

What should I do? Will driving the car damage anything right now? Is my gearbox about die? or did I put the wrong axle oil in. My gut feeling is I might have the wrong axle oil in my car, but right now I'm not sure what to do.

Edited by KrazyKong

Changing the diff oil might (as in just might) make the backlash in the diff slightly more noticable so that when you change into/out of gear with the auto selector, the change in direction of load via the tailshaft to the pinion/crownwheel will result in a little thump as the gears mesh up. Maybe the oil that came out was quite a thick one, or maybe it was a proper LSD oil and so had some different properties that masked the thump.

I wouldn't worry about it.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all, I’ve just finished fitting the timing belt on my RB25, following the standard procedure: rotate the crank twice, release the tensioner, then tighten it down. The belt feels tight, and you can see that clearly in the picture below I’ve heard some people say it’s actually better for the belt to be slightly loose rather than too tight, as excessive tension can lead to snapping. So that’s in the back of my mind. What I’m seeing is this:  • At idle, the belt looks fine.  • But when cranking and especially when revving (around 3–4,000 RPM), there’s a momentary flap/flex or flicker in the belt, which I’ve tried to capture in the video. So my question is — based on what you see, is this slight belt movement something you’d consider normal, or am I just being OCD? Could this amount of movement cause sync issues? Or is it just a harmless bit of flex under load?   from what I know belt flap and flex is expected when crank spins up and pull cam with it Would appreciate any thoughts or similar experiences.     IMG_7656.mov IMG_7657.mov
    • I've replaced the front brakes of my NA to 324 brembos and 350z calipers: i'm going for 225/40-18 up front and 245/35-18 in the back. I have Rays 7.5*19 ET35(225/35) in the front with 5mm spacers otherwise the calipers "lock up/ won't rotate". When i use the calculator i come up with 8*18 ET30 for 225/40...... but not sure i get problems with the calipers. Anyone riding around with 18 inch. that can confirm "that it'll fit"? In the back it's 7.5*9 ET30 (245/30) with the 5mm spacers, but there is no problem with the standard small brakes, so i want to take 8.5*18 ET25 (245/35).
    • Lol.. but then.. always come back to a JDM..
    • Glad to hear. If possible, get your tuner to check air's to make sure everything is still where it should be.
    • The problem with FB/Insta/Reddit etc comments relating to cars is simple. You get to ask a question once, and get one round of replies. For things that can actually be answered in a few lines of text, once, it's fine. After 6 hours, your original question is lost to the void. There are no follow ups, additional questions, anything. No project car is ever such a simple list of questions to ask. You need discussion.
×
×
  • Create New...