Jump to content
SAU Community

Getting Off Defect

rubzy

By rubzy,
in South Australia

 Share

Recommended Posts

rubzy Rising Star

rubzy

Posted
Posted

Hey guys, just putting something out there to see if anyone has not been able to get their car off defect themselves and has ended up getting somewhere to help them like Nisswreck for example. Would really like to know how people went if they have had to use someone for help in this area. I would generally think that if a place helped you with this then you'd be through Regency basically first go, wouldn't you? Cos they should have all the bases covered yes? Your feedback would be much appreciated, cheers.

Link to comment
https://www.sau.com.au/forums/topic/381718-getting-off-defect/
Share on other sites
Matty Sherlock Experienced

Matty Sherlock

Posted
Posted

Sinergy motorsport also do defect removal. Although don't be bummed out if you dont pass first go. Personally i'd go for an inspection just to find out everything that needs repair/replacement.

HR32GTS 4DOOR Community Regular

HR32GTS 4DOOR

Posted
Posted

I got my 32 through regency about 2 weeks ago and did all the work myself. Went to regency first to see what needed to be done and then did it all myself. Subframe bushes, centre tail shaft bearing, rear tie rods, front right tie rod ends and a fark load more done for much much cheeper than i could get anyone else to do it. then got a mechanic to look over it before i took it and got through in about 5 min. So if you are pretty mechanically minded and have decent tools, jacks, car ramps etc you can do most of whatever needs to be done yourself for much cheeper.

Tommy Kaira RL Mentor

Tommy Kaira RL

Posted
Posted

Vince at Import Compliance Systems can turn your car back to stock and pass it for you and then return it back.

He got my GTR through which needed lots of stock parts.

Blazk Experienced

Blazk

Posted
Posted

Any idea on how much that would cost?

$175 to put it through for initial inspection...i know i just did it :D

Ill be doing all the defect removal and replacements myself as i cant afford $2k from Import compliance systems and synergy just to put it back to stock (that's just to get it through and then put all my gear back on). Cheaper for me to buy all the stock parts.

rubzy Rising Star

rubzy

Posted
  • Author
Posted

Well I know I'll need a stock exhaust & then I got quoted from Sinergy to change my HID's to normal globes for 220 but that's not changing 'em back either :P Got a couple of mates willing to help spin a few spanners with me so far, guess I should get that inspection so I'll know exactly what needs to be done. Would be interesting to get Reuben to help considering I'm Reuben too, kinda been waiting to meet him, don't know too many Reuben's. I know now that I'll have to wait now anyway cos I won't be able to get it cleared before the car show this weekend which was the general idea anyway cos my car is going to be in it. Appreciate everyone's help.

Import S13 Veteran

Import S13

Posted
Posted

Yeah, Sinergy charged me $50 to put water in my washer bottle and $80 to remove tint on my front two windows. Have it all on paper I think unless I gave it away with my car.

Can do it all yourself and save yourself heaps.

jrm Veteran

jrm

Posted
Posted

Well I know I'll need a stock exhaust & then I got quoted from Sinergy to change my HID's to normal globes for 220 but that's not changing 'em back either :P Got a couple of mates willing to help spin a few spanners with me so far, guess I should get that inspection so I'll know exactly what needs to be done. Would be interesting to get Reuben to help considering I'm Reuben too, kinda been waiting to meet him, don't know too many Reuben's. I know now that I'll have to wait now anyway cos I won't be able to get it cleared before the car show this weekend which was the general idea anyway cos my car is going to be in it. Appreciate everyone's help.

You can convert your own for a coupla hours time, and about $50 in parts - if you're handy. This way also leaves the option to convert them back easily.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      R33 GTST Sh*tbox to Polished T*rd

      By Duncan · Posted

      Nice, thanks for sharing your progress....that's a pretty long list you are putting into it!
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Decided to upgrade my pressurised plastic coolant expansion tank for a fancy pants alloy version The OEM versions can get brittle, even the new plastic one I got when I first got the car is a starting to show signs of "stress" I wasn't cheap, but it is basically unbreakable
    • pacman_1219
      RB25DET Neo Rebuild

      By pacman_1219 · Posted

      Morning all, I have an RB25DET Neo that's in need of a rebuild. Will need new pistons etc due to detonation damage. Would anyone be able to recommend a shop in Southeast Queensland who I could bring my long motor to for a rebuild? Just want someone who knows RBs and whos built a bunch of them before. TLDR - recommended engine shops for RB rebuild.
    • Yeetus
      R33 GTST Sh*tbox to Polished T*rd

      By Yeetus · Posted

      Gday Thought it was about time I started a build thread! As expected this project has snowballed into a huge financial liability, but unless you’re strong willed and responsible, it’s not a surprise. Background -  My first turbo car was an R32 GTS-4, got my full license and then totalled my Au Falcon a week later, so while trying to sell my RMZ450 dirtbike to buy another car a bloke offered to swap the R32 which at the time I felt like I was ripped off but looking back and seeing prices of those now ($40kish) it was a good deal, I didn’t know enough about these cars to appreciate what I had so sold it before the RB20 blew up. Between here and there, out of 12 cars I’ve owned the note worthy ones are a V8 Lexus SC400 (soarer), a couple of XR6 Turbos and my beloved S15 which I had for about 3 years, picked it up for $12500, repairable write off but she was fine, gun metal grey/pewter and bone stock/unmolested until I got my hands on it. Ended up spending about the value of the car and 280kw, 2 demerit points by the time I got defected and sold it for $14500 (also $40kish in today’s market, rip) Fast forward to the present day, I’m in a much better position financially and daily an MQ Triton (great cars, pipe down Ranger Bois), I cruised marketplace and car sales for a few months looking for another R32, the best deal I could find was an absolute rust bucket half finished project for $12000, until this R33 popped up in Port Macquarie for $18k - unregistered and barely running but decent shape, kept an eye on it for a few weeks and the price steadily dropped, $16k then $15k then $14k, that was the point where I was like shit someone’s gonna snatch this up! It was owned by a young bloke who had big plans but him and his missus just had a baby so smartest move financially for them but big gain for me. So 2 days later I’m towing a car trailer to pick this thing up. Roughly 2 weeks and $3500 later I’m cruising around Newcastle in my beat up R33 all smiles and dose noises! It only needed some basic shit to get it going, coil packs and air flow meter, electrical stuff and all fluids changed, 158k kms and running pretty good, nice smooth engine after oil and coolant flush - when I say coolant I mean it had been filled up with tap water, every gallery and heater element was filled with rust, 8-9 flushes later and still had brown liquid coming out but she’ll be right. The car was painted R34 Bayside Blue at some point but whether it was a cheap job or just not looked after is anyone’s guess, clear coat flaking like sausage roll.  Was rethinking my choices and contemplating life, had it up for sale for $22k - still cheaper than any registered R33 but got little interest, next minute I had an opportunity at work - 6 months overseas for good money, so that was a no brainer, fast forward again and here we are with a 50% finished project. Current Mods - 200ish KW according to butt dyno Was tuned with Apexi PowerFC EBC (old school Greddy Profec)  Stock turbo (more shaft play than a Tinder date gone right) 3inch turbo back Varex muffler  Aftermarket injectors of mystery size, Power FC showed 36% duty cycle at full boost so not behd good size Someone had good intentions but stuck with the stock R33 MAF so we had misfires at 6000rpm due to the MAF hitting 5.2V So far I’ve redone the entire interior with carpet form Car Mats Direct, new Seats and steering wheel from Autotechnica, also sound system by Autobarn (mainly Kicker) Also MCA pro comfort coil overs - Hands down best purchase yet, worlds of improvement over the tired 30yrold shocks Goals - 450kw/600hp on flex tune New paint job - Midnight Purple 2 Engine is at the shop getting rebuilt with forged rods a pistons, new valves and springs, ATI Harmonic balancer, Aeroflow 7.5L sump, rear head drain and oil restrictors as per oil control thread* and cam covers modded for larger breathers, other stuff I can’t recall of the top of my head Parts purchased and to be installed once the engine is done -  Engine loom from Wiring Specialties including these options: Haltech Nexus S3 R35 Coil pack conversion  PRP Dual Trigger kit Fan controller  Other Parts -  262 Kelford Cams Turbo - Hypergear ATR43SS3-ProS with T51R mod (whistly boi) 6 boost manifold (high mount) 50mm Turbosmart Pro gate (plumbed back for legal reasons) HKS Super Turbo Exhaust with High Flow Cat Custom 3.5inch dump and front pipe 1500cc Bosch injectors  Fuel Pump walbro 525 Haltech MAP and IAT sensors Haltech Flex Sensor Fenix Radiator with dual thermo fans LS1 Alternator Kit Oil Filter Relocation from EFI solutions and Cooling pro oil cooler Many other things sitting in my garage waiting for that engine to come back. Progress pics to follow -  
    • GTSBoy
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By GTSBoy · Posted

      Losses have to be less with DC coupling. Provided the battery inverter has decent MPP tracking ability - which really shouldn't be a problem. It's not 2005 any more.
×
×
  • Create New...