Jump to content
SAU Community

Recommended Posts

Looking for coilovers for the M35

just fitted 20s and is looking a bit too high

also over the stock jumping castle suspension

if you have any lying around let me know

have to be adustable height and damper

Call me on 0431 518 660

Link to comment
https://www.sau.com.au/forums/topic/381979-wtb-m35-stagea-coilovers/
Share on other sites

check out these options bud...

BC BR Type RS Series Coilover Kit

http://www.justjap.com/store/product.php?productid=19203&cat=&page=1

BC V1 Design VT Coilover Suspension Kit

http://www.justjap.com/store/product.php?productid=18628&cat=&page=1

Nismo S-Tune Spring (If still avaliable)

http://www.skylinesaustralia.com/forums/topic/379571-m35-nismo-s-tune-springs/

I hope these help your cause as its really doubtfull anyone has a spare set just laying around the place.

Saw them thanks just thInk that you can get them for 1150 brand new

Dunno if it's worth second handies for the 150 off and by the way think these

Have both jazz and jiz option lol

Musecret has them for $1199 and justjap has the same looking ones for $1149

Those are the V1s...the onese sold for $1299 @ JJ are the BR's...

Don't ask what's the difference cos u might start a flame war :whistling:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Lower at the hubs. Funny I forgot to mention that part. Do this pull here I turned the camera off too soon but the graph shows a drop at the top and that was because the pipe from the turbo blew off. The tuner said we could’ve made possibly another 15 whp. He also added if I switched to ethanol we could up the boost some more as well. I was comfortable capping it at the most of 20 pounds. Turns out the turbo pipe just needed a new worm clamp. Got home replaced that then did a third gear pull from 3k to 7200 rpm and the power was great to the top. I just got an ecu mounting bracket from IEE that I need to try and get everything to fit well. It’s a PITA to get the harness and ecu fit properly behind that kick plate 
    • He means "as opposed to mechanical cable drive". Older cars (R32 for ex.) had cable drive. Later cars with essentially the same gearbox, ie R34 GT (NA RB25) used essentially the same box as the R32 GTSt, but instead of a cable drive, had an electronic speed sender plugged into the same hole in the box, running from the same little gear that would have run the cable. Some of the shittier later cars use a speed sender on the nose of the diff, or the ABS sensors.
    • Lower than engine, or lower than it should at the hubs? Either way, that is a nice power figure and I'm not surprised you say it rips now. What stopped you from turning it up any more? Injectors? Or did it just stop responding to boost?
    • Got my 34 gtt tuned last week. Car made 362 wheel horsepower at 19 psi. Turbo was the ATR43SS. Only other upgrades were haltech 2000 series. 650cc injectors, walbro 250, fmic. Pro hub dyno reads 6% lower than actual figure according to my tuner. Car is a real ripper now.  IMG_7261.mov
    • Hi everyone, I'm wondering if anyone in Melbourne (preferably West) has a non-S2 R34 front bar. If it's already off the car, even better!  Nothing too weird, I just need to get a cut-out of the hole that the front indicators clip into 🤣 (image attached for reference)   I've got a front bar from JSAI Aero, but those holes need to be cut myself, and I want to get it right so the indicators will clip securely. And my OEM bumper is a S2, so I have no reference. So looking for a member who might be able to spare me a few minutes to make a cardboard cut-out using your front bar.
×
×
  • Create New...