Jump to content
SAU Community

Recommended Posts

]WHITE R32 GTS-T

ALL PARTS FOR SALE IF NOT LISTED JUST ASK

FRONT STRUT BRACE $50

DRIVERSIDE GUARD $100

COMPLETE DOORS $100 EACH

WINDSCREEN $50

DOOR MIRRORS $50 EACH

TYPE M SPOLIER $50

REAR PODS $100

SEATS $150

DOOR TRIMS $25 EACH FEW MARKS

FRONT & REAR BRAKES $500

TAILIGHTS $50 EACH

REAR BAR $75

REO BAR $75

REAR REVERSE LIGHTS $50 EACH

TAILSHARFT $100

MANUAL PEDDALS $100

BARE SHELL REGO ABLE $600

post-51589-0-48788400-1320317894_thumb.jpg

post-51589-0-70407800-1320317901_thumb.jpg

post-51589-0-04664300-1320317931_thumb.jpg

post-51589-0-57842000-1320317941_thumb.jpg

R32 GTR GENUWINE 69,000K'S

PASSENGER SIDE GUARD $300

COMPLETE DOORS $100 EACH

MOMO RACE WHEEL & BOSS $150

DOOR MIRRORS $50 EACH

GTR WHEELS $800 NEW TYRES

GTR SPOILER $100 OR $150 WITH BOOT

REAR REVERSE LIGHTS $50 EACH

TAIL LIGHTS $50 EACH

REAR REO BAR $100

IGNITION BARREL AND DOOR LOCKS $150

SEAT BELTS $25 EACH

RB26DETT APEXI POWER FC $1100 WITH HAND CONTROLLER

GTR GAUGES $100

NISMO GTR CLUSTER 320KPH $500

APEXI COIL OVERS $900

NISMO STRUT BRACE $150

APEXI PODS $200

REAR SWAY BAR $150 WITH ALL BRACKETS

COMPLETE REAR CRADLE

DIFF, DRIVE SHARFTS BRAKES $600

OIL COOLER & RELOCATOR $500 (NEEDS ONE FITTING)

FRONT BRAKES $300

HKS TOP INTERCOOLER PIPES $200

REAR GTR SEAT TOP IS FADED $125

BARE GTR SHELL AND CAN BE REGISTERED $1000

post-51589-0-15978500-1320317958_thumb.jpg

post-51589-0-80998100-1320317965_thumb.jpg

post-51589-0-93595100-1320317973_thumb.jpg

post-51589-0-76138000-1320317983_thumb.jpg

post-51589-0-36723800-1320317991_thumb.jpg

post-51589-0-82119500-1320318005_thumb.jpg

post-51589-0-02237500-1320318013_thumb.jpg

post-51589-0-77140400-1320318019_thumb.jpg

post-51589-0-67545700-1320318033_thumb.jpg

post-51589-0-36922500-1320318042_thumb.jpg

post-51589-0-17211100-1320318050_thumb.jpg

RB26DETT MOTOR AND LOOM $3000

IN THE ACCIDENT THE ALTERNATOR WAS SNAPPED OFF THE MOTOR

SO THERE IS A SMALL HOLE IN THE BLOCK

YOU HAVE TO WELD IT BACK ON WHICH WILL COST $100-$200

SEE PICTURES 69.000K'S ALSO NEEDS A WATER PUMP.

post-51589-0-96314900-1320318068_thumb.jpg

post-51589-0-21303700-1320318074_thumb.jpg

CALL/TXT LUKE 0431 391 262

TXT IS BEST ON WEEKDAYS AS IM ALWAYS ON THE PHONE AT WORK

WILL POST MOST PARTS AT BUYERS COST.

Edited by skyline_r33_panda
Link to comment
https://www.sau.com.au/forums/topic/382015-sa-wrecking-r32-gtr-and-gtst/
Share on other sites

Hi,

after the following if in good comdition;

dash centre vents, window demist vents, clips that hold sill garnish, clips/screws for ecu and kick panels, internal door handles if in vgood condition, and cover over door handle bolt (on inside of door trim - passanger side) and the clips that hold the garnish down under the window wipers

Also after the plastic bits that sit inside the door and cover mirror bolts (triangle) and the metal plate that separates the rear seat to boot and boot trim

Probably a bit tricky posting some of that to Perth (wa) but what ever you have and willing to send over - please let me know

Cheers

Ps: also after the clock if it's working :)

Edited by Steve
  • 2 months later...

Hi if you still have the gtst i'm after the power steering line that goes from the pump, under the engine on the front of the crossmember then connects to the lower of the big banjo bolts of the front of the steering rack, it also has a sensor in the middle of it (I can provide pics if needed).

And would you be willing to post it to Wagga (2650) ?

Cheers

Vince

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few suggestions: Do you have the option of retarding your exhaust cam gear to bring the power band over to the left? VCT would be turned off after you make peak torque, you see the power/torque will decay faster with it left on all the way to the limiter Once VCT is turned off, you'll find the motor will take a bit more timing being ramped in Send its mum, more boost! Of course, depends on your exhaust pressure.
    • Tow a boat... people won't know wtf is going on 🤣 
    • I was back on the dyno again yesterday after completely revamping my methanol injection system. I was making 440kw at 19psi. Great, this is more then I was making last summer with my old meth system at that pressure, and I figured it would be smooth sailing up to 30+psi. We continued increasing from there and by 25psi, I had only hit 455kw. Dyno sadly lost utility power at this point and I left. We seemed to be on course to hit the same power wall as last summer (477kw@27psi). This is a built RB25 S1 stroked to a 2.8. Built and ported head with Kelford 272/262 cams. Precision 6466 Turbo. Tuner last year believed the power wall is a mix of RPM limitations (Hydro lifters/Limit set at 7600RPM) and fueling. With my new meth system, we're seeing zero knock now but it still won't go up.  What else can I do at this point? Here's my train of thought.  - It's clear from the dyno graph that I would easily make power to 8500+RPM but I'm limited to 7600RPM. I could risk increasing my limiter, but hydro lifters have me worried. What are my options here besides going NEO head or solid lifter conversion? I'm rocking a 1.05AR turbine on my 6466. Would dropping down to a .84 help shift that power down in anyway? - We're only seeing roughly a 30kw difference at the top end with VCT on or off. Is this normal? I want to confirm VCT is working properly. - Should I look into other cam options?  - Should I just keep increasing boost and see if she wakes up later on? I would expect to hit 600rwkw around 35psi with my 6466.   
    • First thought is to use a ram mount (to hold the ipad) + windscreen suction mount. The arms on the ram mount can be as long as you like, should be able to position the ipad pretty well with that setup. 
×
×
  • Create New...