Jump to content
SAU Community

Recommended Posts

Hey everyone I just had my car tuned by jez and he did a great job. The car made 224kw on a very safe tune I need to do a few things first before advancing timing and adding boost. We had a few problems from the start and took a while to fix. My little 20 seen 25 psi off a boost spike but man it loved it that was my fault tho . Had injector problems as well but jez nutted it all out. For such little boost it pulls mega hard cans wait for more power. I highly Reconmend jez as I tuner plus he is a top bloke. plus he found how to stop stalling without a bov plumb back but this his secret

Mods to car are

Kando dynamics td06h-20g

Gtr front mount

injectors mow sure on size now after tune

Decat with rsr cat back

Screamer reason for safe tune getting plumbed in soon

Pod with z32 afm

walbro 650hp pump

Stock fpr

Stock coils

Plugs at .8

Thanks jez and boydy for not giving up on me

Link to comment
https://www.sau.com.au/forums/topic/382116-rb20-dvs-jez-td06h-20g-winner/
Share on other sites

Ur little RB20 loved 1.8 bar of boost. The thing made 180kw at 5000rpm before we backed off.

I am loving the kando turbo. Full boost at 4500 on a stock RB20 is unreal.

Stoked we found how to stop the stalling issue's without a BOV. Need to do some more testing yet but looks promising with the NIStune.

Hurry up and fix the few little issue's and we can finish the tune off with 18psi.

I'm hoping around 260kw but we will see what happens. Yeah I'm very happy with how the wastegate turned out looks great easy to access which helped last night because we had to remove the 10 pound spring as it was set to 17 pound which ended up being 22 . It's a very cost effective way to controll boost and easy access! I'm using a 7 pound spring and a 22 dollar mbc and I'm getting no spikes stays at flat 14. And make sure if your using gate pressure it's hooked up to the bottom port as we seen 1.8 bar from top port

Yeah mate eBay special I have a 8cm housing perfectly suites the baby 20. Luvpis look in the fab section and there is a step by step guide on how to has all photos on the job plus current setup. Can't be bothered to do it right now maybe later

+1 for Jez, one day the poor guy will get a car on the rollers that dosent need hours of stuffing around before he can tune it ;)

Boydy is a nice bloke as well hey. I was in a similar situation with my 33 and the guys just would not give up, a lot of tuners would just send you packing and tell you to come back when all the problems are fixed.

Nice result mate.

We went till 12:45am Dave. But then we had to send him to fix it up. His screamer was basically aimed at me so was too loud and couldnt hear what i needed to hear.

Finish it off this week hopefully.

Might have to change my name to midnight tuning

Roy what else is done to that 32 with TD06?

Its an absolute stock RB20. On that dyno run it had a HKS Type S Cooler, HKS Hyper Exhaust, HKS Air Filter, GTR Injectors, Power Fc/Z32 and it was a 98 track tune. Runs cam gears tweaked to get it on as soon possible. The 20 loves the 100 pump but sadly they pulled it from the bowsers here in Vic so have to make tune with the more conservative 98 tune

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Time to decide what’s more import, your power level or your budget because you’re going to struggle to keep both 
    • Our Southern Highlands Cruise is proudly registered with “R U OK?” Day.  Sometimes the best way to check in on your mates is by getting out for a drive together. Sharing a common passion like cars creates the perfect space to chat, connect, and support each other.  A simple “R U OK?” can make all the difference. Let's enjoy the drive, the company, and look out for one another. PLEASE WEAR YELLOW FOR “R U OK?” DAY Sunday 14th September 2025 9:30AM Meeting Crossroads Homemaker Centre 10:00AM Cruise Departure Via Old Hume Hwy 11:45AM Arrival at Mittagong RSL Club Meet Location: Crossroads Homemaker Centre Final Destination: Mittagong RSL Club *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yep, its been down for a while, as I understand it it will be back soon.
    • Yeah I also looked at Plazmaman, but, it ended up alot  cheaper getting black ones through EFI when you also added in the delivery cost
    • Nice shot! They look super clean. The roof rack delete on the black one is interesting. Would like to see more pictures from different angles. It's subtle but could make quite a difference to how the car looks in profile.
×
×
  • Create New...