Jump to content
SAU Community

Recommended Posts

You can pick up a half cut r33 for about 5k or less

Not really worth it, you can get an rb25 and box for 2-2.4k...

What ECU are you running? Chances are you will need a new one if you go rb25..

If you can do all the work yourself I'd be saying at least 3k total for a stock setup... but like I said then u need to look at new ECU/injectors .

I have kmon ears. But i prefer to have my head over the engine. I know its risky but i havent mastered the kmon to my liking yet.

I have never missed a ping yet. Just that some people want to push limits (BSA).

Nice kmon is killer.

if you can hear it in engine bay your already 3 degrees to far ie is already been suffering light to moderate det for those 3 odd degrees. I think i have a kmon setup thread somewhere with khz settings etc...

Once you get used to the kmon you will love it, im using knockbox atm but the beauty of the kmon is the logging software.

Is that the same knockbox as I posted above?

How do you find it?

I'm assuming you use the pro version? Any experience with the basic one?

For $400 I'm going to get myself one I think...providing they are decent enough for basic road tuning on a street car

I have the analog outputs from the Kmon fed back into the dyno data acquisition it's awesome, can have knock plotted over anything, boost, afr ect. Can also setup alarms in the dyno software for high levels ect.

Am also using STATUS frequency settings. They're mint!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...