Jump to content
SAU Community

Recommended Posts

Hey guys,

Putting aside around $1000 - $1500 for some extra power.

Currently got

-FMIC

-Splitfire coils

-Triple plate ceramic cluth

-Manual Boost controller

-New shocks/springs

Its running on around 10-11psi

Car still seems pretty powerless with the factory turbo and im worried about bumping the boost up any higher.

What kind of things can I look at and around what power could I make with them.

Try not to just say "get a turbo" because I know you cant just bolt a turbo on and be done with it.

Cheers for the input biggrin.gif

Link to comment
https://www.sau.com.au/forums/topic/382195-1000/
Share on other sites

Assume you have a

1. 3" or 3.5" exhaust and a free flowing filter (Pod or K&N panel) - $1000

2. Aftermarket ECU or piggy back - $2000

3. Injectors - $600+

4. Fuel pump - $350

5. Drop in cams and cam gears - $1500

and when was it last tuned? $700

and then maybe look at Turbs - $2500+

ps. second hand parts will be cheaper and riskier

Link to comment
https://www.sau.com.au/forums/topic/382195-1000/#findComment-6096880
Share on other sites

Shit sorry guys!

Left out its already got a 3"

So ECU and a tune for $1500?

Also if im going injectors should I go 750cc? so I know it will cover after the later mods

dont need injectors for the stock turbo, stock injectors are good for 230ish kw

Link to comment
https://www.sau.com.au/forums/topic/382195-1000/#findComment-6096932
Share on other sites

Definately the ECU is next then mate and you can expect to see around the 200rwkw zone and eliminate that massive flat spot your car will have :thumbsup: dont worry bout injectors until you are ready for a turbo upgrade in my opinion :cheers:

Shit sorry guys!

Left out its already got a 3"

So ECU and a tune for $1500?

Also if im going injectors should I go 750cc? so I know it will cover after the later mods

Link to comment
https://www.sau.com.au/forums/topic/382195-1000/#findComment-6096949
Share on other sites

The Nistune can be bit of a pain mate cos the RB25 computer isnt Nistune compatible and you will need to get an RB20 or 300ZX ECU to get Nistuned just somethin to think about :whistling:

Okay sweet im going to send out some emails now to get some quotes.

If I can get a pretty good quote then ill go for a NIStune and some injectors.

Thanks guys :)

Link to comment
https://www.sau.com.au/forums/topic/382195-1000/#findComment-6096955
Share on other sites

New plugs, Gap about 0.9

New oil filter and engine oil

New gearbox oil

New diff oil

New air filter

New Bosch 040 intank fuel pump (mines running 355atw with one)

New fuel filter

Remove I/C and clean the insides (it gets coated with oil)

Flush and clean radiator

Clean/Flush/bleed brake fluid

Machine/replace discs and fit new pads

Clean /flush power steering fluid

All this is what I would do first to ensure engine life and peice of mind.

THEN... take it to a tuner and get him to run it up, he will/should tell you what is wrong if anything and whats needed to achieve the power and/or responce your after, talk to him about your budget, if he wont listen he is rubbish and justs wants your money, find a better tuner.

All this should cost around $1000, your car will go better, it will be safer, and it will be a clean platform to start from, it all depends on how far/stupid you want to go, this way you will not spend money on parts now that need to be upgraded later, things like injectors, exhausts and ECUs.

Work out how much power you want and only buy parts to get that end result, there are lots of shiny things that will just waste your money and not give you any gain.

Shop smart, Shop S-Mart

Link to comment
https://www.sau.com.au/forums/topic/382195-1000/#findComment-6096968
Share on other sites

On a side note my old stock Turbs ran at 14lb for about 12mths, it was still fine when it was removed to be replaced with a biger one, was I just lucky, was it good servicing, was it the stars ?, just saying.

Link to comment
https://www.sau.com.au/forums/topic/382195-1000/#findComment-6097022
Share on other sites

Hi Daniel,

Mark is right on the Full Service but normally I expect that is done straight after you buy a car, if its not been done very recently, as it gives you the clean base to work from.

I'm no expert so your questions might be better in the forced induction thread on the main forum.

IMHO - as for ECU's it;s what your tuner reccomends, as they are comfortable with what they know, that will get you the best results.

I run a Haltech, others Autronic, alot of Power FC's and some Microtechs.

Which shop to go to maybe you next question and I can't answer that one either as I dont use locals.

Check out the thread at the top of the ACT main page. See everyones thoughts pinch.gif and then make your own mind up.

Personaly I use Croydons in Sydney because they built my engine and installed my Haltech.

Cheers

S!N

If your budget doesnt alow then look at the advice above "you will need to get an RB20 or 300ZX ECU to get Nistuned". Most cost effective for a 33.

Link to comment
https://www.sau.com.au/forums/topic/382195-1000/#findComment-6097469
Share on other sites

Yo

So I can always get my budget stretched further.

What is the point in working and earning money if your not spending it on something you enjoy is my thoughts.

Full service was done just before I purchased the car but I don't think it when in to as much detail as the one stated above.

Currently my person im using is Premier Automotive as my mechanic but I don't think they do much tuning.

To be honest I been emailing Croydon already so I will probably go with them once I get the ECU.

Going to have to make a wish list and cross each one off.

-Massive Service.

-ECU (going to look at costs and brands)

-Front facing plenum

-Tune

Everyone is so bloody helpful its awesome.

Ps. Going to try head out to the Friday meet this week (hope my new dash shows up before so you all don't laugh at my fluffy one hahaha)

Link to comment
https://www.sau.com.au/forums/topic/382195-1000/#findComment-6097564
Share on other sites

For a mint tune, I and just about 99% of the NSW guys recommend UNIgroup Engineering for tunes.

+ they look after NSW Club members (hint: join the club lol)

http://www.unigroup.com.au/Home.html

My advise, is dont change to the FF Plenum...there is no point unless you are after 500+hp and even then the standard one will do it.

So save the coin on that and get your turbo highflowed + tune (see the Hypergear thread in the FI section)

As said before standard injectors and AFM are good for 230rwks, which makes for a very quick and responsive street car

Link to comment
https://www.sau.com.au/forums/topic/382195-1000/#findComment-6098050
Share on other sites

Thanks guys!

Looks like I sold my 323 so that gives me $700 to spend on the highflow.

Got a quote and they said around $900 but im sure I could get it down more.

With the tune im going to go for NIStune but have to buy the ecu first.

If I start going for the aftermarket ECU and tune + high flow.

My budget is starting to get blown out by around $800-$1000

Are these the correct prices I should be expecting.

-Highflow $700-$900

-Tune (wouldnt have a clue)

-ECU $150-$250 (RB20 or 300ZX)

-Service $500

Link to comment
https://www.sau.com.au/forums/topic/382195-1000/#findComment-6098260
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...