Jump to content
SAU Community

Extra Power Methods?

5ky-lin3

By 5ky-lin3,
in Engines & Forced Induction

 Share

Recommended Posts

5ky-lin3 Collaborator

5ky-lin3

Posted
Posted

Hey guys,

Just been roaming and stumbled upon these things call Air intake supercharger boosters. Does anyone know if they actually work or do anything? any feedback would be appreciated.

This link explains what they are meant to do. http://www.performancechiptuning.com/Air+Intake+Supercharger+Booster/2/

Another gizmo I found was a Pivot Mega Raizin battery stabalizer chip. Any word on these and how they perform?

Here is a link to one of these http://www.nengun.com/pivot/mega-raizin

Cheers,

Dallas

Link to comment
https://www.sau.com.au/forums/topic/382403-extra-power-methods/
Share on other sites
The Mafia Grand Master

The Mafia

Posted
Posted

oh dear. You are going to get flamed to the shithouse for posting this lol.

But just to clarify, I bought 4. Two for the intake, one before the the electric supercharger, and one after the turbo.

I also installed one before the cat converter, and after the cat converter.

helped get the air in and out efficiently.

I'm now thinking of buying a 5th one and installing it just before my ATMO BOV.

jjman Mentor

jjman

Posted
Posted

essentially, no. the amount of airflow these things can contribute is F-A, meaning they do.... F-A.

And because they are bullshit and also made from such substance they have been well known to fail and break apart. And seeing as they are upstream of the intake, guess where the bits end up? and guess what they do? they should be renamed a 'rebuild catalyst'.

N think about it, if something like this could actually make a difference the big manufacturers would be doing it.

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Thread closed. Believe it or not, but since SAU started more than 7 years ago, this topic has been discussed before.

Please use the search function in future. It may be found here:

http://www.skylinesaustralia.com/forums/index.php?app=core&module=search&search_in=forums

While we understand that it can be frustrating to have your thread closed - Please consider that other members may feel it to be disrespectful and selfish of you to post a simple question, without using the search feature to review the wealth of information provided by said members over the years.

If you still feel that this action is unjust, then please PM me and we can discuss it further.

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Welp, good to know. Will have to wait awhile until steady hands with drills and taps are available. In other news, these just arrived! I will weigh them for posterity.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      100% the factory sender is tapered, that is how it seals (well, that and teflon paste or tape)
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Thanks folks - I've saved a few links and I'll have to think of potential cable/adapters/buying fittings. First step will be seeing if I can turn the curren abortion of a port into something usable, then get all BSPT'y on it. I did attempt to look at the OEM sender male end to see if it IS tapered because as mentioned you should be able to tell by looking at it... well, I don't know if I can. If I had to guess it looks like *maybe* 0.25 of a mm skinnier at the bottom of the thread compared to where the thread starts. So if it is tapered it's pretty slight - Or all the examples of BSPT vs BSPP are exaggerated for effect in their taper size.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      Have a look at that (shitty) pic I posted. You can see AN -4 braided line coming to a -4 to 1/8 BSPT adapter, into a 1/8 BSPT T piece. The Haltech pressure sender is screwed into the long arm of the sender and factory sender (pre your pic) into the T side. You can also see the cable tie holding the whole contraption in place. Is it better than mounting the sender direct to your engine fitting......yes because it removes that vibration as the engine revs out 50 times every lap and that factory sender is pretty big. Is it necessary for you......well I've got no idea, I just don't like something important failing twice so over-engineer it to the moon!
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
×
×
  • Create New...