Jump to content
SAU Community

Recommended Posts

Hehe it feels like a need a lighter flywheel :rant:

In mine, third and fourth are the best gears - it only really starts to boogie once the needle is past 100km/h, and over 160km/h it really shines. Fifth is a bit tall for good acceleration until you start making serious power, but it'll still pull the needle all the way around until it hits the fuel gauge, great for novelty points :wassup:

Only problem is that you can only really use it to its best on the track. Second is still good fun (and great for blowing away ricers) but out on the track is where it comes into its own.

Well my bike indicates 134km/h on the rev limiter in first gear, which is half way between second and third in the line, and with a bad launch (~2.1 60') that'll be over in around 5 seconds. Half track at the drags in 7.4 at just over 105mph (~169km/h), which would be the top of third gear in the line, so you'd need to change gears three times (into fourth) in that 7½ seconds. You'd be in first for about 1½ sec of that given the crap launch, in second for maybe 2½ sec, and third would be the other 3½ seconds. A proper launch would easily wipe a few tenths off that. So if you can imagine having to change gears that quickly, control the throttle and the clutch, and keep it off the walls, you've got a fair idea. The bike is quicker at half track than the car is at full track :rant:

It's a pretty cool feeling crossing the 400m mark at well over 200km/h :) I need to scab a ride on a GSXR1000 or something, now THAT would be exciting down the strip...

Running the bike has actually given me better car control - the Skyline is much slower, so there's more time to think. What I mean is, I know what 170km/h in under 7.5 sec feels like, so doing less than 130km/h in 9.5 sec is much easier.

Not trying to sound like a tool, just trying (badly) to explain it :)

I cant even begin to imagine what it would be like in a 10/11sec car

It gets hard when you're only JUST scraping the upper limit of the higher number there, Ben :rant: That said, it gets MUCH better the more you do it :))))

Adrian

Hey Guys. What does it feel like when you plant your foot in 1st gear? What are its most powerful gears? (in a Skyline)

A stockish answer to your question:

1st gear is good to get some whiplash happening but it usually ends in wheel spin when pushed even a fraction too hard. 2nd is where the fun begins, putting you back in your seat and preparing for 3rd. Once you hit 3rd watching the needle shoot from 100 to 150 odd is awesome! Past that, 4th slows down a bit but still pulls hard beyond what can be read off the stock speedo.... then you know you're moving :P

The most powerful gear is 1st hence the ease of wheelspin. I feel the power most in 2nd then 3rd. 2nd is my fav gear, esp thru the twisties :(

What car were you comparing to?

my best gear is 1st gear heaps of power then 2nd and 3rd.

hey for a qtr mile time i got a 13.58 with pfc, exhaust, fmic, 12psi boost. I had 2 12'' subs as well. Does that sound right?

my mate got a 14.00 sec with standard ecu, exhaust, 10psi boost and no subs.

what u guys reckon?

my best gear is 1st gear heaps of power then 2nd and 3rd.

hey for a qtr mile time i got a 13.58 with pfc, exhaust, fmic, 12psi boost. I had 2 12'' subs as well. Does that sound right?

my mate got a 14.00 sec with standard ecu, exhaust, 10psi boost and no subs.

what u guys reckon?

Sounds about average dude. The trick is the launch, not that Im a master at it but the more you do it the better you get at it.

I lurve 1-2-3 gears

1st - waste of time

2nd - fun for scaring the everyday commuters (fishtailing always gets their attention)

3rd - can be interesting on cold tyres. Good for instant overtaking power on warm tyres.

4th - overtaking at high speed and cruising at medium speeds.

5th - high speed cruising and the track.

The above really depends on the tyre temps. When the Nittos aren't warm it's wheelspin city.

Would be up around 200 at a guess. Easiest way is to go halfway up the tacho, then double the speedo. Eg if it cuts out at 8000, go to 4k and read the speedo. If it shows say 98km/h, double that. That'd be your 'indicated' speed anyway, as for how fast you're really going, well who really knows, but as an indication, at 110 on the speedo my PFC shows 106.

my best gear is 1st gear heaps of power then 2nd and 3rd.

hey for a qtr mile time i got a 13.58 with pfc, exhaust, fmic, 12psi boost.  I had 2 12'' subs as well.   Does that sound right?

my mate got a 14.00 sec with standard ecu, exhaust, 10psi boost and no subs.

what u guys reckon?

With those mods I would be expecting a little more. Just got my 33 GTR from compliance about 4 weeks ago, took it to Willowbank completely stock (except for BBS rims and Yoko 265 tyres and APEXi BOVs) and ran a 13.467, although the clutch was fairly average by the 8th run. I have a friend with a 33 GTR also, with similar mods to you, and although he hasn't taken it down the quater he is definately quicker than me, by a fair margin.

Will definitely be posting dyno charts when they're done.

I was using 75hp jets for the 11.9.

Adrian

I reckon go for 10's on the standard turbo mate. Just have some spare cash for an engine rebuild ready when you up the shot.

What fuel and nitrous jet sizes are you using for the 75 shot?

Yeh i know thats what i thought. Im removing the subs this weekend and gona give it another shot. The problem i think is when i up the boost to 15psi, there is a big lag between gear change and spool up. any suggestions? When i lower boost say 12psi its quick? Very strangle and will need to get it looked at.

With those mods I would be expecting a little more.  Just got my 33 GTR from compliance about 4 weeks ago, took it to Willowbank completely stock (except for BBS rims and Yoko 265 tyres and APEXi BOVs) and ran a 13.467, although the clutch was fairly average by the 8th run.  I have a friend with a 33 GTR also, with similar mods to you, and although he hasn't taken it down the quater he is definately quicker than me, by a fair margin.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That was the first session so not a lot to take from the day. It was low 20s ambient and the coolant had got to 110 (and obviously had some pressure!) so that still needs to be addressed. I haven't downloaded the data yet but will. I had refilled the auto trans with Redline DT6 because it claimed the best viscosity I could find at 100o. It wasn't really long enough to get a good feel for that; while the trans got to 100o in the session it still wasn't shifting crisply as I hoped. I think I'll try a few more sessions before judging. No steering motor overheat but I'd hope not in only 1 session! But finally the suspension; it was night and day over the standard stuff and the car was a couple of seconds quicker on the same crappy tyres, which is a huge difference. I'll stick with that and get some sway bars and a mechanical diff sorted too and see how that all goes together
    • I guess it’s partially a compromise of how my car is used, wanting to be able to switch from drift to grip with track side on-car adjustment. Also partially with the way the knuckles are set there is more static camber but less dynamic camber gain. 
    • OK, so update from the track day on Friday It was a classic "an unfortunate series of events'. There were a few cars around and when i checked my mirror coming out of the fish hook I notice some smoke from the rear of mine. Looked again and it was getting much worse, I figured I'd blown a turbo or something to got off it and pulled off the racing line. However.... since it is a left hairpin into a right kink, I was on the inside of the next corner. There was a car passing me on the left and a big drop off over the ripple strip on the right......and someone had knocked the witch's hat that was on the apex about 1m onto the track. So, between those 3, I decided to mow down the cone and not damage my car/the other car. Right choice, but surprising result.  The car decided the cone was a small pedestrian so it blew the rear bonnet hinges up to protect their head in the upcoming person to car impact....I didn't see that coming and like an airbag deployment it happened super fast. Straight into the pits from there, everything was driving fine but it became clear it was a coolant leak not smoke, it was billowing up onto the windscreen. Onto the trailer and home. I'll do a separate thread about the repair (once I work out what it is ), but the immediate problem was the bonnet wouldn't open because the front was pinched onto the front bar and would not release. Ultimately we unbolted the hinge from the bonnet, pulled it back a little and it released from the front OK. "There's your problem", the top radiator hose had popped off at the radiator.
    • Yeah that looks like great caster, but I'd suggest trying less front camber some time and seeing if it helps with braking without reducing mid corner speed too much
    • I ended up setting the rear 5mm higher than normal to give some clearance.  My plan is to run the least camber I can in the rear which I think with the extra width is going to need to be -1.75 to -2.00° just to get clearance.  Guards have been rolled and pulled as much as they can/I would be wanting to.  front has the Acostal knuckle with the KPI change and the drop etc. So should be okay with the existing settings I have run with AR1s etc Front: Toe total -2mm(1mm out each side) Caster +7.5° Camber -3.8° Ackerman +15°
×
×
  • Create New...