Jump to content
SAU Community

Coolant Leak..

kones

By kones,
in General Maintenance

 Share

Recommended Posts

kones Apprentice

kones

Posted
Posted

So i got my car back from tuners with a coolant leak..

I have replaced all water hoses with new silicon hoses and checked everything..

Filled up my car this arvo with fresh Nulon, After probably 3 litres goes in it starts leaking from what i can see is down off the starter motor, and down off the gearbox.

Does anyone have any idea of what it could be. Im leaning towards heater issues in the dash but i dont have wet carpet,...

Thanks Al

Link to comment
Share on other sites
Gouch12345 Explorer

Gouch12345

Posted
Posted (edited)

Theres a little turbo cooler line at the very back on the engine, behind the rocker covers....right down the back (for an rb25det) may be the same for your 32. Check that with a mirror after a run.

Edited by Gouch12345
Link to comment
Share on other sites
kones Apprentice

kones

Posted
  • Author
Posted

From what i can see, it is not leaking out of the block in any way.

The hoses are a JJR set from Just jap..

The coolant leaked out before the engine was turned one.. once i started filling it up. it just trickled out

Link to comment
Share on other sites
  • 1 month later...
W0rp3D Grand Master

W0rp3D

Posted
Posted

the hard line feed to the turbo?

That hard line wont be leaking, that line starts from the inlet manifold, on the inlet side there is a 90 degree rubber hose that goes around the back corner of the head, its an absolute bitch to replace the rubber hose, it was easier for me to connect a hose to the inlet manifold and then run rubber hose to where you have taken the pic and join back to the hard line there.

Link to comment
Share on other sites
W0rp3D Grand Master

W0rp3D

Posted
Posted

ok, my fix would still be the same, trace it back to where the rubber hose on the other end joins on the inlet manifold and run rubber hose around the back to some where in your picture, cut the hard line there and slip the rubber hose over it, will do just as good job for 1/10th the headaches

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Rezz
      Japan Scrapbook

      By Rezz · Posted

      G.G.C. (Gibier German Cook) restaurant in Motomachi in Kobe: A tiny 2 floor restaurant that was founded in 1976. The original couple who owned/ran it retired and sold the business to a corporation who pretty much tried to keep it the same as it was.  Lots of lesser known (to me anyway) German beers available.  Venison with vegetables. The meat came from deer from Hokkaido. The chef told us that there's a whole industry around the use of all parts of the deer from the antlers to the hooves. Sure enough, directly accross the street from this restaurant is a shop that sells all manner of utensils, clothes and objet d'art all made from deer skin, bones and horns.... also owned by the same corporation. The venison was super tender 😋 Various decorations, a lot of which were quite old, no doubt from the original owners. A nice pilsner too which I'd never seen before.  It's well worth a visit but check the opening hours, they're closed on Wednesdays, only open 11:30am - 3pm on Mondays and Tuedays, 11:30am-3pm for lunch and 5pm-11:30pm on Thursdays, Fridays and Saturdays, and 11:30am-3pm and 5pm-9pm on Sundays. Last order is 30mins before close.
    • Rezz
      Japan Scrapbook

      By Rezz · Posted

      Yep around 2m long or thereabouts.  I made another post in the photo diaries 17 years later lol. I swear it has not been that long!
    • acsplit
      SAU Motorkhana Saturday 18th May Avalon including entry list.

      By acsplit · Posted

      Full results via link below https://docs.google.com/spreadsheets/d/1inu1mRRO0WjV2-3vGYsjnmYggVOzmApWOby68GwPGcI/edit?usp=sharing  
    • BK
      Another BK R32 GTR money pit...

      By BK · Posted

      Have I not posted since 2022 ? wow... Yes, it's pretty much finished mechanically. I'll probably sell it soon as the old man is 80 in November, so 99% he won't ever drive it again. I don't really need 3 GT-R's and I haven't driven any of them since September last year - correction, drove my 33 earlier this year on Australia day. All of them have been like this since then.
    • The Bogan
      MLR's Bogan cruise ship

      By The Bogan · Posted

      So, after talking to Tyson at Auto Tech Engineering about my "cunning plan", he suggested to "not piss money away on stuff that the car probably doesn't need" (the max IAT at the end of the 1/4 ever only seen around 30°C, which is in no way a issue, and as such, for what I use the car for I really don't need colder IAT anyway The whole point of the "upgrades" that I thought about doing was that my IAT started creeping up from 25°C to 30°C when cruising, then drop back down, then raise back up, rinsing and repeating, it has never done that before, so after talking to FI interchillers they assumed that it was the Bosch pump starting to fail, and if I was going to replace the pump....... I would do my usual thing of "while where in there" But, Tyson said he has seen similar things happen to IAT with failing or leaking AC compressors on other cars with interchillers, and as the AC compressor is 22 years old it is probably well on the way out anyway, and if a electric water pump fails it stays failed and doesn't just speed up and slow dow, but if a AC compressor starts to fail or is leaking, it will fluctuate and give a typical result to the IAT He said he could test the compressor and see how it is functioning and pressure test the whole system, but, as I do, I've just got them to order a new compressor to install to start with, and do a AC service and see if that fixes the issue That way, if it is the compressor, I wouldn't be spending lots of coin on something that wasn't the issue, and not actually needed, as the stage 2 kit, and pump, comes in at around $2k in parts alone, not including the plumbing and other parts that will be required or labour  And apparently the Bosch pump I have is really reliable and well up to task for the flow/pressure requirements that I need to keep my intercooler and massive amounts of boost heat (7 psi LOL) under control giving a nice and cold IAT A big shout out to Tyson for this, not many people will talk a idiot out of wasting money on car modifications, and the saved car budget funding can be wasted elsewhere on things that I may, or may not, need, like a nice new leather SS interior with red stitching......maybe I can convince the Minister for War and Finances into a nice trip down to Victoria for a week away to see the sights (I'll explain that I will need a hire car once we're down there so we don't have to worry about the Commodore being parked up on the streets at night, and it just so happens there's a joint that I can store it during that time) $1680 for all of the interior trims, + installation cost (I'll ask for a quote to install the trim if the new compressor fixes the issue)   https://leatherseats.com.au/products/leather-seats-trim-skins-kit-to-fit-vt-vx-vy-ser1-ss-green-black-diy-install  
×
×
  • Create New...