Jump to content
SAU Community

Recommended Posts

Hey all, how's it going?

Been floating around the forums for a while now and thought it was time to introduce ourselves and ask for a little bit of help.

Our names are Drew and Jess. We live with Veilwest and Ozcan so its a very Nissan friendly household with Ozcan's black on black R34 GTT, Veilwests widebody S15 and our R32 GTR. Currently the GTR is a little dead (spun a bearing :pwned: ) so thats the main reason for not introducing ourselves a little earlier lol. It was only on the roads of Canberra for 1 day before it shat itself so unlikely its been spotted driving around but may have been spotted while on the back of a tow truck once or twice.

It's gunmetal grey with a gold pearl to it (Ask Eiji, its hot lol). Very pretty but very dead lol. Still love the car, its in the process of being fixed so hopefully we'll be able to meet up with everyone before the end of the year.

Anyway, back to asking for a little bit of help....

I gave my dad (Drew's dad) my old R32 GTS when me and Jess bought the GTR so he's currently in the process of trying to get a roadworthy sorted. I only owned the car for close to a year so i never ended up swapping the rego over because by the time rego ran out we would have our GTR. Basically the exhaust that the previous owner put on it is ridiculously loud and failed roadworthy, so I'm wondering if anyone here has a stock or quiet catback exhaust for an R32 that would pass roadworthy that me and my dad would be able to buy or borrow for a couple of days at some point to pass roadworthy.

Any help would be greatly appreciated :thanks:

Cheers guys,

Drew

Link to comment
https://www.sau.com.au/forums/topic/383287-im-new-pluslittle-help/
Share on other sites

Cheers Zebra

Have contemplated fitting another muffler, its something we're considering at the moment but got quoted today $320 to make it 100% legal. Haven't had a chance to shop around for quotes yet but does $320 sound a bit steep?

yeah it's stainless.

the setup it has at the moment is completely stock from engine to cat and then stainless 3inch from cat back. even with the silencer in it it's still to loud and has the worst sound lol.

good to know that $320 is pretty average though, might ask dad if he wants me to go halves with him to help him out

$300 a day, really? thats insane lol.

$320 really doesn't sound so bad anymore. Hoping to get everything sorted by end of next week but we'll just get another week permit if thats not possible. He also got told that both front suspension upper ball joints (i think thats what its called. the bit at the bottom of the upright where the front hubs pivot) have play in them and it got failed on that too. he got quoted $1600 to fix it all but thats with getting brand new uprights from nissan. I've got another pair of front uprights/hubs at home so this weekend im thinking of swapping those ones in to see if its any better. it's not possible to just tighten the bolt to fix the play unless the bolt is already loose correct?

if you understand what im trying to describe lol.

Cheers

As a general rule of thumb, I've noticed exhausts come in multiple parts:

Dump pipe

Front pipe

Cat converter

Cat back (upto almost the axle)

Muffler section

If course this is just for single muffler systems - or at least mine.

The exhaust on dads 32 is in 2 parts from the cat to the end. Cat to about half way (rear axle ish) is straight through, no muffler/resonator type thing, connected to the rear section by a 2 bolt flange, then from that flange there's maybe 2 feet of pipe which curves to go under axle then welded to the rear muffler which is a cannon/hotdog type jobbie. 3inch from cat to the end

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
×
×
  • Create New...