Jump to content
SAU Community

Recommended Posts

I bought an almost stock(exhaust, cooler, suspension) series 2 for 7k. Just to give you an example. I also previously bought a modded gtst for 11k. That is the difference. If its a clean non turbo you can get about 4 - 6k for it. About 2k ontop you got a stock gtst, about 2 k further you should have 240rwkw. About 2k extra maybe a fully built motor... for under 14k.

if you have to ask this kind of question then you need to sell the car and buy a commodore.

You can't just swap the engine, f**k, there would be at least $3k of mechanical work involved.

You need:

Engine - $1500

Wiring loom - $400

Brakes- $500

Gearbox (DE box is weak) $1500

Suspension - $1500

ECU - $100

Intercooler - $200

Piping - $400

Exhaust - $500

Labor - $3000

Engineering - $500

Thats $10,100

Are you a retard? You can buy a whole R33 GTS-T for that.

Please sign out of SAU and delete your account. And buy a commodore.

I can almost guarantee after you buy a R33 Turbo, you'll be signing back on wondering why its stalling and blowing black smoke after installing your Vent to Atmo BOV.

Edited by The Mafia

if you have to ask this kind of question then you need to sell the car and buy a commodore.

You can't just swap the engine, f**k, there would be at least $3k of mechanical work involved.

You need:

Engine - $1500

Wiring loom - $400

Brakes- $500

Gearbox (DE box is weak) $1500

Suspension - $1500

ECU - $100

Intercooler - $200

Piping - $400

Exhaust - $500

Labor - $3000

Engineering - $500

Thats $10,100

Are you a retard? You can buy a whole R33 GTS-T for that.

Please sign out of SAU and delete your account. And buy a commodore.

I can almost guarantee after you buy a R33 Turbo, you'll be signing back on wondering why its stalling and blowing black smoke after installing your Vent to Atmo BOV.

did it really upset you that much?

If such things bother you to the degree they clearly do, you may want to consider getting yourself a life outside Skylines Australia.

Douche.

Maybe if dickheads like you and the OP didn't post shit we wouldn't need to worry about the site turning into Nissan Silvia forums.

So, might be easier if you left instead?

You can get a engine with loom ecu and Turbo for around 1.9k maybe cash isn't a issue and i rather do this for the pure enjoyment no need to act like a dick maybe you need to take a chill pill no need for the rage

You can get a engine with loom ecu and Turbo for around 1.9k maybe cash isn't a issue and i rather do this for the pure enjoyment no need to act like a dick maybe you need to take a chill pill no need for the rage

The enjoyment disappears quickly mate, trust me. Sure I love my car now, but in hindsight I would probably have loved a factory GTT just as much and spent far less cash and had far less problems. There are so many fkn headaches it isn't funny.

I've had my car almost 4 years now. In that time, I've put 23,000kms on the chassis. My car is my daily, it's the only car I own. 23,000kms in 4 years as my daily driven car. THAT is how much time it has spent off the road; first getting the engine swap and then diagnosing and fixing random problems associated with said engine swap. It has come a long way and I love the pig wub.gif But if I could do it all again... Sell it.

Edited by Hanaldo

The enjoyment disappears quickly mate, trust me. Sure I love my car now, but in hindsight I would probably have loved a factory GTT just as much and spent far less cash and had far less problems. There are so many fkn headaches it isn't funny.

I've had my car almost 4 years now. In that time, I've put 23,000kms on the chassis. My car is my daily, it's the only car I own. 23,000kms in 4 years as my daily driven car. THAT is how much time it has spent off the road; first getting the engine swap and then diagnosing and fixing random problems associated with said engine swap. It has come a long way and I love the pig wub.gif But if I could do it all again... Sell it.

Amen.

Big home projects always end up doing your head in. Unless you are very skilled at the task you are setting out to do, have surplus cash ontop of what you think it will cost (cos shit always goes wrong or unexpected things come up) and alot of time so you dont end up going f*k god make this end soon- then you are going to have your head done in.

GTST's are so cheap now that DE+T's or RB25DE to DET swaps are just the biggest waste of time.

Then again, its shit like this that keeps darwinian selection in motion. You waste all your time n money on stupid shit n the smart ones use it to make a shitload more money...

Amen.

Big home projects always end up doing your head in. Unless you are very skilled at the task you are setting out to do, have surplus cash ontop of what you think it will cost (cos shit always goes wrong or unexpected things come up) and alot of time so you dont end up going f*k god make this end soon- then you are going to have your head done in.

GTST's are so cheap now that DE+T's or RB25DE to DET swaps are just the biggest waste of time.

Then again, its shit like this that keeps darwinian selection in motion. You waste all your time n money on stupid shit n the smart ones use it to make a shitload more money...

laugh.gif

Agree with pretty much everything you said.

You should literally double your budget when you approach things like this. Don't crunch numbers by adding up how much things are going to cost and then expect that it will cost exactly that much. It doesn't. And it is IMPOSSIBLE to predict the things that go wrong. You think you have planned so carefully and taken everything into account and then bam. Electrical gremlins, forgotten perishables, tuning issues, mechanical failures, etc. It's endless.

It's a bit different for us over here in WA, as there are no P-Plate restrictions so non-turbo Skyline's aren't worth chips. And my car being a 34, when I calculated my costs it appeared to be cheaper to do the conversion than it would be to sell it and buy a factory 34 in similar condition. Of course I didn't take into account the aforementioned costs. I did have all the experienced people telling me not to do it and what to expect, but I went ahead and did it anyway. I can't exactly say I regret it, but I certainly wouldn't do it the same way if I had the chance.

I tuely understood the factor of costs and i have chosen the sell path way before this thread turned into a hate machine,

But yeah my biggest choice now is what to buy and where i don't want to rush into buying a gtst like i did with my gets an d have it bite me in the ass

One last question before i let this thread rot, how hard is it to geta rwc for a modded car in Vic ?

One last question before i let this thread rot, how hard is it to geta rwc for a modded car in Vic ?

check this thread and you will get a sense of it...

http://www.skylinesaustralia.com/forums/topic/382455-r32-rb26-ecu-choice/

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...