Jump to content
SAU Community

Recommended Posts

  • Replies 5.5k
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Austin F1 track set for August completion

Austin’s new Formula 1 track is on course to be completed in the middle of August, AUTOSPORT can reveal, with construction efforts now fully back on course at the United States venue.

Although there was uncertainty about the future of the race last year amid a dispute over the contract – with work at the circuit being halted for several weeks – a big push by Austin’s organisers ensured it remained on the final 2012 calendar issued by the FIA’s World Motor Sport Council in early December.

With its deal secure, construction resumed at the track shortly afterwards and track chiefs have confirmed that the recent delays will not have any negative effect on its November 18 event taking place.

Senior representatives from the Circuit of the Americas, including president Steve Sexton, executive vice president Bruce Knox and chief marketing and sales officer Geoff Moore are in London this week for meetings with Bernie Ecclestone to update him on progress.

Moore told AUTOSPORT: “The race is on. Construction is happening six days a week. The paddock buildings are being topped off, work on the main grandstand has started and we are looking at mid-August for completion.”

Pressure on the construction efforts has been eased by the fact that the race’s date has been shifted from an original June date to its November slot – where it will form a back-to-back with season finale Brazil.

Although a reported $25 million payment from local government, as part of a Major Event Trust Fund, will not be given to Austin officials in advance – track chiefs say the venue already has advanced funding in place to ensure completion of the track.

The money will be applied for after the race, once it is clear just how much tax revenue the Austin Grand Prix has generated for the local economy.

The total cost for the Circuit of the Americas is estimated at $350 million, with track chiefs hoping to attract 120,000 spectators for the inaugural event.

http://www.formula1fanpage.com/austin-f1-track-set-for-august-completion/

Lauda: Raikkonen needs a strong car

Kimi Raikkonen will only return to his very best in Formula 1 this year if Lotus is able to provide him with an exceptional car.

That is the view of former world champion Niki Lauda, who welcomes the return of the 2007 title winner to F1 but thinks his potential will be very dependent on what machinery he is driving.

“It’s excellent news that he will be back,” Lauda told AUTOSPORT. “He is an exceptional personality and will create huge interest and excitement with media and fans.

“It is a good move for Renault or Lotus as the team is called now. It depends on how good the car will be, because Kimi will only shine in an excellent car.”

Lauda believes that Sebastian Vettel’s rivals are also going to face a mammoth task if they want to overhaul the double champion – and he has not ruled out the German dominating the forthcoming season again.

“Sebastian has gained a lot of confidence last year, and doesn’t make mistakes,” he said. “He will be the benchmark again. Who ever wants to beat him, must rely on a perfect car.”

Speaking about his predictions for the 2012 season, Lauda added: “Right now nobody knows how the new cars will perform. However, from a logical point of view, Red Bull should be out in front again because they only have to modify the exhaust and the diffuser.

“The loss in downforce will be regained by aerodynamic improvements. The question is: who will find the smartest solutions? Who had a very good car in 2011 has the advantage now too.

“Red Bull had an excellent car last year and they only need to do further developments whereas, say, Mercedes have to build a proper new car. That includes the risk of going in the wrong direction, though they added some well-known technicians. The same for Ferrari.

“It is easier to improve from a solid basis than to start from scratch. Having said that, we all have to wait for the first tests.”

http://www.formula1fanpage.com/lauda-raikkonen-needs-a-strong-car/

Button to sample new McLaren first

Jenson Button will be the first driver to sample the new McLaren MP4-27 at next month’s Jerez test.

McLaren has confirmed that Button will take the wheel on February 7 for the first run of the car at the Spanish track.

Button will also drive on the second day of the test, with team-mate Lewis Hamilton taking over for the final two days.

Hamilton will then have the first two days of the Barcelona test, which kicks off on February 21, with Button taking over for the final two. The pair will then alternate running in the final four-day test at the same venue, with Button driving on the first day on March 1.

McLaren managing director Jonathan Neale confirmed last week that the new car had passed all of the FIA crash tests before the end of last year, meaning that it will definitely be ready for the start of pre-season testing.

http://www.formula1fanpage.com/button-to-sample-new-mclaren-first/

Awesome to see him back finally. I have only been a die hard F1 fan since the very end of 09 so I haven't really been around while Kimi has been at the wheel.

Hopefully we have an exciting year with so many champs on the grid.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...