Jump to content
SAU Community

Recommended Posts

Wonder if Vettel is wishing he took the new exhaust now...

Sebastian Vettel said he has no regrets about his decision to stick with Red Bull's old exhaust design, despite going out in Q2 for the first time in 43 races.

The world champion decided to use the old exhaust layout for the weekend, while his team-mate Mark Webber opted for the latest?-specification unit.

Vettel failed to make it into the top 10 in qualifying for the first time since the 2009 Brazilian Grand Prix.

The German said he was happy with how he had performed during qualifying, but he conceded that his times were simply not quick enough.

"It's always easy to say this and that now, but I was happy with the car yesterday and that's why I decided to stay as we were," said Vettel.

"I was happy with the laps I had in qualifying. There were no mistakes, but they weren't quick enough. It's as easy as that.

"Yesterday I was happy with the car. We decided to stick with the current settings and I don't want to blame it on the car. Three times I did exactly the same lap, and three times it wasn't quick enough to make it into Q3."

Vettel admitted he was disappointed to be starting from so far back, but he reckons he still has a chance to put on a good performance in? the race.

"Obviously I'm not happy," he added. "As I said, I was pretty happy with the laps I had in Q2, but they weren't quick enough. We have to start the race from P11 and see what we can do tomorrow. Surely it makes it a bit harder, but not impossible to do a good race.

"I was pretty happy with the car today, but it was pretty close. Unfortunately we weren't able to take the final step. There's a lot of work to do, but there's a very long race tomorrow, which gives us lot of chances."

Team boss Christian Horner downplayed the difference between one exhaust layout and the other, saying the gap between Vettel and Webber was not necessarily down to it.

"Not necessarily. The characteristics are slightly different but it's hopefully suiting both drivers' different driving styles," Horner told Sky TV. "If you look at the first and second sectors there is absolutely nothing between them, so the difference seems to be in the third sector."

http://www.autosport...rt.php/id/98809

lol, what he means is a3863053-114-male19-male-crying-tears-smiley-emoticon-000061-large.gif?d=1300008028

Pastor Maldonado and Pedro de la Rosa have been given reprimands for impeding other cars during qualifying for the Chinese Grand Prix.

http://www.autosport...rt.php/id/98829

  • Replies 5.5k
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Wow,this is turning out to be the best season.The fastest cars in race trim cant make the top 5 in quaily.Thats always going to make the race interesting. Then youve got Saubers and Lotus up the front,I think its fantastic.Dont count Mark out just yet,the Mercs will burn their tyres,Mark should be able to get past the Saubers,Kimi could be a problem?So come on Mark,get that thing off the line and youre a good chance for a podium or you never know dare I say a win.

Anyone know what the stream for HD will be for the Race?

Not keen on missing key stuff from another failed One telecast

Just run live timing and you can piece together what is happening from the times and the highlights commentary on the side.

Jean-Eric Vergne will start from the pitlane for the Chinese Grand Prix after his Scuderia Toro Rosso team made changes to his car overnight.

Following a disappointing qualifying performance, Toro Rosso changed the floor, barge board, floor to rear wing spacer, nose barge board, sidepod wing, T-tray, sidepod inlet and ballast.

As these parts are different to the ones that were originally used, under parc ferme regulations it means that Vergne will not be able to take up his 18th place on the grid, so must start from the pitlane.

http://www.autosport.com/news/report.php/id/98849

I really hope Kimi can get a result today. You have to think looking at the front row and the straight line speed of the Mercs, they will have a pack of cars behind them into the first stop and the likes of Webber will need to 3 stop to get soem free air and hammer.

Has the potential of being a cracker!!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...