Jump to content
SAU Community

Recommended Posts

Wonder if Vettel is wishing he took the new exhaust now...

Sebastian Vettel said he has no regrets about his decision to stick with Red Bull's old exhaust design, despite going out in Q2 for the first time in 43 races.

The world champion decided to use the old exhaust layout for the weekend, while his team-mate Mark Webber opted for the latest?-specification unit.

Vettel failed to make it into the top 10 in qualifying for the first time since the 2009 Brazilian Grand Prix.

The German said he was happy with how he had performed during qualifying, but he conceded that his times were simply not quick enough.

"It's always easy to say this and that now, but I was happy with the car yesterday and that's why I decided to stay as we were," said Vettel.

"I was happy with the laps I had in qualifying. There were no mistakes, but they weren't quick enough. It's as easy as that.

"Yesterday I was happy with the car. We decided to stick with the current settings and I don't want to blame it on the car. Three times I did exactly the same lap, and three times it wasn't quick enough to make it into Q3."

Vettel admitted he was disappointed to be starting from so far back, but he reckons he still has a chance to put on a good performance in? the race.

"Obviously I'm not happy," he added. "As I said, I was pretty happy with the laps I had in Q2, but they weren't quick enough. We have to start the race from P11 and see what we can do tomorrow. Surely it makes it a bit harder, but not impossible to do a good race.

"I was pretty happy with the car today, but it was pretty close. Unfortunately we weren't able to take the final step. There's a lot of work to do, but there's a very long race tomorrow, which gives us lot of chances."

Team boss Christian Horner downplayed the difference between one exhaust layout and the other, saying the gap between Vettel and Webber was not necessarily down to it.

"Not necessarily. The characteristics are slightly different but it's hopefully suiting both drivers' different driving styles," Horner told Sky TV. "If you look at the first and second sectors there is absolutely nothing between them, so the difference seems to be in the third sector."

http://www.autosport...rt.php/id/98809

lol, what he means is a3863053-114-male19-male-crying-tears-smiley-emoticon-000061-large.gif?d=1300008028

Pastor Maldonado and Pedro de la Rosa have been given reprimands for impeding other cars during qualifying for the Chinese Grand Prix.

http://www.autosport...rt.php/id/98829

  • Replies 5.5k
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Wow,this is turning out to be the best season.The fastest cars in race trim cant make the top 5 in quaily.Thats always going to make the race interesting. Then youve got Saubers and Lotus up the front,I think its fantastic.Dont count Mark out just yet,the Mercs will burn their tyres,Mark should be able to get past the Saubers,Kimi could be a problem?So come on Mark,get that thing off the line and youre a good chance for a podium or you never know dare I say a win.

Anyone know what the stream for HD will be for the Race?

Not keen on missing key stuff from another failed One telecast

Just run live timing and you can piece together what is happening from the times and the highlights commentary on the side.

Jean-Eric Vergne will start from the pitlane for the Chinese Grand Prix after his Scuderia Toro Rosso team made changes to his car overnight.

Following a disappointing qualifying performance, Toro Rosso changed the floor, barge board, floor to rear wing spacer, nose barge board, sidepod wing, T-tray, sidepod inlet and ballast.

As these parts are different to the ones that were originally used, under parc ferme regulations it means that Vergne will not be able to take up his 18th place on the grid, so must start from the pitlane.

http://www.autosport.com/news/report.php/id/98849

I really hope Kimi can get a result today. You have to think looking at the front row and the straight line speed of the Mercs, they will have a pack of cars behind them into the first stop and the likes of Webber will need to 3 stop to get soem free air and hammer.

Has the potential of being a cracker!!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Pinout is different to my knowledge, but you should confirm to be sure. Also you will need to adjust the VQ table in Nistune to suit. I would still recommend sticking with recirculating BOVs, I'm not sure if the R35 card MAF will fully resolve stalling caused by reversion/throttle lift.
    • What issues are those? Previous owner said it wants to stall sometimes. We did test drive and it was nice and smooth so it will be sporadic or idk. And if i just change MAF(the sensor to R35 version) it should be better? And as i asked...is it like "plug n play" with oem MAF from R34?  This is a MAF from R35 right?
    • Even with no BOV you will have issues unless the MAF is a hot film type like the R35 which has some design features to deal with reversion. Hot wire MAFs are very sensitive.
    • So i just change the (whatever is inside ma original MAF and slide the R34 MAF (it is gonna fit right in? ) and somewhere on the hot side a BoV...i presume that would be vented to the atmo? I just "trying" to understand...maybe my mechanic would know this   I would not mind(even prefer) to run stock BoV cuz it is way more than fine but i do not have that and only pipeing what is left is oem J pipe ... I will be running Blitz fmic(to fit oem one side style) and i gonna need custom pipes cuz i do not have rest of those pipes and hoses... But i am want standalone ECU. Only choice i have atm is Nistune...but that is not gonna cut it right?I dont know what Nistune can and cant do... I know you guys know Link and Haltech...but whatabout ECUmaster? I know guys in here run those but i literally do not know about that and do not know differences... Just know to take whatever "my" tuner can work on.  
    • Is that the blue one rpm?  
×
×
  • Create New...