Jump to content
SAU Community

Recommended Posts

Have some goodies that have come out of the GTR for sale. All in full working order, just selling due to upgrades. Some pics included, will take more during the week. Will post at buyer's expense but would prefer pickup esp for the bigger items.

1. HKS EVC 4 Boost Controller (This is sometimes listed as an EVC 5 in the US). Good used condition, $400 SOLD

2. HKS CAMs - Step 2, 264 in, 272 ex (Note, these are not drop ins, need upgraded valve springs) Perfect condition, $600 SOLD

3. Standard R32 GTR intercooler $100 SOLD

4. HKS Upgraded Actuators. These came off my HKS GTRS turbos and did hardly any k's. I believe that they have an adjustment of boost level 0.8 to 1.1 bar or thereabouts - $250 SOLD

5. 18 x 9.5" Sparco wheels with rubber +23 up front for caliper clearance and +22 with bigger dish up back. Purchased from Import Monster to be my track wheels and had them on my car for about 5 minutes before finding out they didn't clear my front brakes $1000 $650 (Link on Import Monster http://www.importmon...roducts_id=1087) SOLD



6. 17 x 9" White sparcos (will go out and check offset later when I get pics) but a lot of you have seen them on my GTR. I love these wheels (and it pains me to sell them!) but they also don't clear my brakes. Restored and resprayed white, all good condition except for some gutter rash on one where I had a retarded parking moment - very easily repaired. No rubber on these... $750

th_P1010011-1.jpg th_P1010044.jpg

7. Pair of R32 GTR standard Sumitomo front calipers. Good condition for their age, have pads with reasonable amount left on them (unsure what the pads are). $200 SOLD

8. Twin HKS GT-RS turbos packaged with upgraded Garrett actuators (were $400), Tomei dump pipes and Tomei manifolds $4000 ono. Whatever gaskets and bolts are left will be thrown in. All in fabulous condition, selling because I've finally bitten the bullet and gone for a big single.

th_IMG_2490.jpg th_IMG_2489.jpg th_IMG_2486.jpg th_IMG_2485.jpg th_IMG_2484.jpg th_IMG_2478.jpg th_IMG_2477.jpg th_IMG_2476.jpg

9. R32 GTR stock intake plenum painted black $150 SOLD

10. R32 GTR stock harmonic balancer $100

th_IMG_2493.jpg th_IMG_2492.jpg

11. R32 GTR water and oil lines $100
th_IMG_2483.jpg

12. Brand new HKS Oil Pump for RB26 $1600
th_IMG_3263.jpg th_IMG_3262.jpg

13. CRD Race Head including cams - PM for specs $8000 - SOLD

14. Tomei 2.8L Stroker used but in great condition - $3500 sitting in cracked block, selling because I bought a complete motor SOLD

15. Trust 115mm Intercooler, near new, great condition some minor stone dents - $1200
***For this price I will throw in the Trust hard piping kit ($600 new inc shipping!) which minus 1 or 2 silicon joins but otherwise complete****.
This model shown at RHD Japan http://www.rhdjapan....-hg-bnr32-26959
SOLD

Link to ad in general FS section also... http://www.skylinesa...-bits-for-sale/

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/385480-r32-gtr-bits-for-sale/
Share on other sites

For all those that are asking, the cams are being sold because I was looking for more power. They saw me happily to 400kw and sounded amazing in the car, I loved the lumpy idle from the different stages.

Will be adding a few more items to the list in coming weeks including a Trust 115mm frontmount, HKS fuel rail and HKS 800cc injectors.

My garage is getting too full, buy my stuffs!!! :)

How much rubber is left on the 18's? I imagine you're running a decent brake setup for the power you've got, so biiiig calipers?? I might upgrade brakes in the future but won't be chasing the power you are so won't need anything so monstrous... would the 17's and 18's your selling both clear a brembo setup? I don't know if they're bigger than standard ones anyway. I was looking for R33 GTR wheels (coz they're light and forged) for around $750 but one of your sets could do the trick. And how long were you running the boost controller? Thanks :rolleyes:

Heaps of rubber left, I can take some pics for you. Yeah I have the AP big brake upgrade on the fronts... Reminds me I should name a price for my stocky calipers and put them up here! :thumbsup:

You're welcome to test fit, I'm pretty sure that both sets of wheels would clear the brembo setup, there really was only a bees dick in it with both sets not fitting over mine.

I was running the boost controller for about 6 months and someone else had it in their car for similar amount of time before I bought it.

Here's some closeups of each of the tyres. There's some minor camber wear and a small amount of cracking - cracking was there when I bought them and hasn't worsened. Make sure you check up the closeups on the import monster add, shows the gutter rash that's on the wheels. They're by no means perfect, I was intending on having them sanded back and powdercoated.

th_IMG_1919.jpg th_IMG_1918.jpg th_IMG_1917.jpgth_IMG_1916.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...