Jump to content
SAU Community

Recommended Posts

Whats wrong with this state ?

MASSIVE increases in speeding fines, driver's licence costs and water fees will kick in from July 1.

While costs for public transport tickets and motor vehicle registration charges will increase only modestly, those caught exceeding the speed limit will be whacked with fines up to 28.6 per cent higher.

Drivers exceeding the speed limit by less than 15km/h will now pay a $252 fine, up from $196.

A breach of 15-30km/h will attract a $371 fine, up from $312, while fines for those travelling more than 40km/h above the speed limit will be $523, up from $468.

Treasurer Jack Snelling said he was comfortable with drivers who broke the law being further penalised, while denying it was simply a revenue-raising measure.

"No one would be happier than me to not raise a single cent from fines from speeding drivers," he said.

"Road accidents cost millions and millions and millions per year.

"I'm quite comfortable with these measures."

Driver's licence renewal fees will jump from $140 to $185 for a five-year term - a 32.1 per cent increase - with the same increase, to $370 from $280, for a 10-year licence.

Mr Snelling said this increase was a result of last year's Budget and there was not the financial breathing room to unwind it.

The average residential water bill will increase by 40.3 per cent, from $469.60 to $658.70, to pay for the Government's desalination plant. Treasurer Jack Snelling has already indicated consumers can expect a similar increase in the following year also.

Motor vehicle registration fees would increase by between 3.9 and 4.3 per cent while the standard compulsory third-party premium would increase by 2.7 per cent.

For a four-cylinder car, this would mean an increase in annual fees from $578 to $595 - a 2.9 per cent rise overall.

Single-trip tickets for public transport would increase 2.2 per cent to $4.70 while peak-time multi-trip tickets would increase 3 per cent to $30.90.

"The annual indexation factor for fees and charges has been set at 2.9 per cent for 2011-12, reflecting the average increase in the cost of providing the relevant services," Government budget documents say.

The motor vehicle fee increases are about 1 per cent above this indexation factor to fund a four-year program of road resurfacing and rehabilitation works for rural roads.

  • Replies 58
  • Created
  • Last Reply

Top Posters In This Topic

Treasurer Jack Snelling said he was comfortable with drivers who broke the law being further penalised, while denying it was simply a revenue-raising measure.

what a miserable lying c**t

Yeah its pretty much a hunt for more money

its the point to point speed cameras which they are going to install around Adelaide next year which totally suck

Are point to point cameras used in other cities yet rant.gif

im assuming you mean average speed cameras. they use them a lot in the UK especially through road works

I cant see it working if you have traffic lights ,

im guessing only on uninhibited flowing roads , lets say roads through parklands between Greenhill rd and south terrace .

can anyone clarify ?

well if the northern expressway extensions onto south road (for example) were happening in the uk there would be a speed camera from when you entered the 40kph zone and one at every set of lights so if you averaged more than 40 youd get done

but they could put them at any traffic lights so that if you sped between two sets of lights, even if you slowed down to go through the intersection then you would still get done

well if the northern expressway extensions onto south road (for example) were happening in the uk there would be a speed camera from when you entered the 40kph zone and one at every set of lights so if you averaged more than 40 youd get done

Those cameras you speak of are already mounted on Port Wakefield road's northern half...

-D

Highest taxed state, highest rego costs, highest speeding fines (even before the increases were brought in), all under the guise of "saaaaaaving lives". This is all Treasury's decision..not road safety. Not one police member attended the meeting when this was voted in.

Those cameras you speak of are already mounted on Port Wakefield road's northern half...

-D

But I was told they are only for trucks/log books at this time.

If they didnt increase the fines then they would most probably increase smokes and beer. So we cant win ever.

Yes there are a few cameras on port wakefield rd. You could hold it down and just before the end pull over for 5 min and then it looks like you were going below average speed.

If they didnt increase the fines then they would most probably increase smokes and beer. So we cant win ever.

Yes there are a few cameras on port wakefield rd. You could hold it down and just before the end pull over for 5 min and then it looks like you were going below average speed.

Yeah we could.

Stop the wankers from giving themselves 31% pay rises. I only got a 3% rise last year based upon the cost of living index, so f**k the pollies.

Oh, and stop them from spending money taking their children overseas... and building shit like tram extensions...

Heres a thought.... spend some money on fixing our roads... how hard would that be?

-D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • I forgot about my shiny new plates!
    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
×
×
  • Create New...