Jump to content
SAU Community

Recommended Posts

I dont work for NU FINISH or am getting paid to write this but i just tried there product and it was excellent ! I recently just used kitten wax compound and never again will I. I applied it, Looked great, Felt great and smelt great BUT when it rained for a bit and then the sun came up and dried it there was droplets that had left little drop sized marks all over the car :(. On my trip to autobahn i had a chat and he tried selling a 50 dollar bottle of polish. wasnt keen. Got new finish and what can i say. Applying it is that friggin easy. With kitten you had to rub it in and make sure there was no residue which takes a good chunk of time. NU FINISH, Damp cloth and clean cloth. Chuck it on ( i did it in direct sunlight) within twenty seconds it drys up and with the clean cloth you simply run it over the white stuff and it flakes off leaving a smooth even layer over the paint. It is nice and shiny but didnt give it a fake look if you can get what im saying, It didnt look like someone has thrown a bottle of wax on it. Some would say it looked like NU paint :P The weather were i am is super random and at the moment its raining yet being super hot and im assuming thats what the kitten stuff didnt like but NU FINISH. It looks great, no droplets, no uneven patches just shiny smooth paint. Any one whos is proud of there car i highly recommend it. I just thought id share my story of how impressed i was. Its the orange bottle which says NU FINISH cant miss it.

Link to comment
https://www.sau.com.au/forums/topic/385981-buy-nu-finish-p/
Share on other sites

  • 2 weeks later...

Hi.

You have all probably seen the add nufinish do where they apply the product to a car and put it through a car wash 52 times. After 52 washes it still beads (wow). When they apply the product they don't rub it of to a shine. Merely put the car through 52 times and of course the excess polish washes of and it still beads.

Link to comment
https://www.sau.com.au/forums/topic/385981-buy-nu-finish-p/#findComment-6172790
Share on other sites

Hi.

You have all probably seen the add nufinish do where they apply the product to a car and put it through a car wash 52 times. After 52 washes it still beads (wow). When they apply the product they don't rub it of to a shine. Merely put the car through 52 times and of course the excess polish washes of and it still beads.

Link to comment
https://www.sau.com.au/forums/topic/385981-buy-nu-finish-p/#findComment-6172794
Share on other sites

Hi.

The nufinish add where they put a car through a carwash 52 times you have probably seen. When they apply the product they don't rub it off to a shine merely put the car through the carwash and after 52 washes the excess product is washed off and it still beads(wow).

Link to comment
https://www.sau.com.au/forums/topic/385981-buy-nu-finish-p/#findComment-6172804
Share on other sites

Hi.

The nufinish add where they put a car through a carwash 52 times you have probably seen. When they apply the product they don't rub it off to a shine merely put the car through the carwash and after 52 washes the excess product is washed off and it still beads(wow).

I believe every advertisement I see on television because they're entirely factual and not just intended to make you go and buy things.whistling.gif

The advertising industry is known for its transparency, honesty and commitment to product testing, ensuring the customer gets the best possible product; not just promoting the product they're being paid to promote.thumbsup.gif

You seem like an intelligent, go-getter, if you live in Sydney; I like to present you with an incredible opportunity to own a large Grey Bridge over Sydney Harbour; just send me all your money now!

Totally legit.

It's entirely possible that Nu Finish is not as amazingly amazing as the ad purports; in the 30 secs of footage I didn't see anything do anything 52 times least of all a car going through a carwash. I realise this may come as a bit of a shock.ohmy.gif

Chaz Dean doesn't give a f**k what anyones hair looks like; he only gives a f**k what his bank balance looks like. Doing stomach crunches in front of the TV for 3 minutes a day will not enable you lose 300 pounds to have a rock hard body in 6-12 weeks either.

Edited by Daleo
Link to comment
https://www.sau.com.au/forums/topic/385981-buy-nu-finish-p/#findComment-6172930
Share on other sites

Hey guys,

I'm not paid by Nu-Finish™ or anything but I will say that Nu-Finish™ is absolutely sensational.

I have only used Nu-Finish™ on my [R34 Skyline] once this year and it has an unbeatable shine that just can't be beat.

Not sure if you guys know this but Nu-Finish™ rated #1 by leading consumer testing magazines for protection, durability, gloss improvement and best retail value.

Highly recommended, if you want a free sample just PM me.

Edited by Everlong-S13
Link to comment
https://www.sau.com.au/forums/topic/385981-buy-nu-finish-p/#findComment-6173767
Share on other sites

nu finish is not recommended , in USA it was ranked lower then turtle wax in my book. its been out for a long time ...dont send me a sample I used a few bottles in USA and it fails even on a daily driver paddock basher

shine cant be beat, ???I bet I can for a 20 dollar bottle of product and it wont show swirls either

Link to comment
https://www.sau.com.au/forums/topic/385981-buy-nu-finish-p/#findComment-6174340
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...