Jump to content
SAU Community

Recommended Posts

I dont work for NU FINISH or am getting paid to write this but i just tried there product and it was excellent ! I recently just used kitten wax compound and never again will I. I applied it, Looked great, Felt great and smelt great BUT when it rained for a bit and then the sun came up and dried it there was droplets that had left little drop sized marks all over the car :(. On my trip to autobahn i had a chat and he tried selling a 50 dollar bottle of polish. wasnt keen. Got new finish and what can i say. Applying it is that friggin easy. With kitten you had to rub it in and make sure there was no residue which takes a good chunk of time. NU FINISH, Damp cloth and clean cloth. Chuck it on ( i did it in direct sunlight) within twenty seconds it drys up and with the clean cloth you simply run it over the white stuff and it flakes off leaving a smooth even layer over the paint. It is nice and shiny but didnt give it a fake look if you can get what im saying, It didnt look like someone has thrown a bottle of wax on it. Some would say it looked like NU paint :P The weather were i am is super random and at the moment its raining yet being super hot and im assuming thats what the kitten stuff didnt like but NU FINISH. It looks great, no droplets, no uneven patches just shiny smooth paint. Any one whos is proud of there car i highly recommend it. I just thought id share my story of how impressed i was. Its the orange bottle which says NU FINISH cant miss it.

Link to comment
https://www.sau.com.au/forums/topic/385981-buy-nu-finish-p/
Share on other sites

  • 2 weeks later...

Hi.

You have all probably seen the add nufinish do where they apply the product to a car and put it through a car wash 52 times. After 52 washes it still beads (wow). When they apply the product they don't rub it of to a shine. Merely put the car through 52 times and of course the excess polish washes of and it still beads.

Link to comment
https://www.sau.com.au/forums/topic/385981-buy-nu-finish-p/#findComment-6172790
Share on other sites

Hi.

You have all probably seen the add nufinish do where they apply the product to a car and put it through a car wash 52 times. After 52 washes it still beads (wow). When they apply the product they don't rub it of to a shine. Merely put the car through 52 times and of course the excess polish washes of and it still beads.

Link to comment
https://www.sau.com.au/forums/topic/385981-buy-nu-finish-p/#findComment-6172794
Share on other sites

Hi.

The nufinish add where they put a car through a carwash 52 times you have probably seen. When they apply the product they don't rub it off to a shine merely put the car through the carwash and after 52 washes the excess product is washed off and it still beads(wow).

Link to comment
https://www.sau.com.au/forums/topic/385981-buy-nu-finish-p/#findComment-6172804
Share on other sites

Hi.

The nufinish add where they put a car through a carwash 52 times you have probably seen. When they apply the product they don't rub it off to a shine merely put the car through the carwash and after 52 washes the excess product is washed off and it still beads(wow).

I believe every advertisement I see on television because they're entirely factual and not just intended to make you go and buy things.whistling.gif

The advertising industry is known for its transparency, honesty and commitment to product testing, ensuring the customer gets the best possible product; not just promoting the product they're being paid to promote.thumbsup.gif

You seem like an intelligent, go-getter, if you live in Sydney; I like to present you with an incredible opportunity to own a large Grey Bridge over Sydney Harbour; just send me all your money now!

Totally legit.

It's entirely possible that Nu Finish is not as amazingly amazing as the ad purports; in the 30 secs of footage I didn't see anything do anything 52 times least of all a car going through a carwash. I realise this may come as a bit of a shock.ohmy.gif

Chaz Dean doesn't give a f**k what anyones hair looks like; he only gives a f**k what his bank balance looks like. Doing stomach crunches in front of the TV for 3 minutes a day will not enable you lose 300 pounds to have a rock hard body in 6-12 weeks either.

Edited by Daleo
Link to comment
https://www.sau.com.au/forums/topic/385981-buy-nu-finish-p/#findComment-6172930
Share on other sites

Hey guys,

I'm not paid by Nu-Finish™ or anything but I will say that Nu-Finish™ is absolutely sensational.

I have only used Nu-Finish™ on my [R34 Skyline] once this year and it has an unbeatable shine that just can't be beat.

Not sure if you guys know this but Nu-Finish™ rated #1 by leading consumer testing magazines for protection, durability, gloss improvement and best retail value.

Highly recommended, if you want a free sample just PM me.

Edited by Everlong-S13
Link to comment
https://www.sau.com.au/forums/topic/385981-buy-nu-finish-p/#findComment-6173767
Share on other sites

nu finish is not recommended , in USA it was ranked lower then turtle wax in my book. its been out for a long time ...dont send me a sample I used a few bottles in USA and it fails even on a daily driver paddock basher

shine cant be beat, ???I bet I can for a 20 dollar bottle of product and it wont show swirls either

Link to comment
https://www.sau.com.au/forums/topic/385981-buy-nu-finish-p/#findComment-6174340
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Lamb roast on Saturday will be different 🥲
    • They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
×
×
  • Create New...